View vehicle applications
Fitment notes and restrictions
Description
Match the Spring to Your Race Suspension
The Swift zero ride height front coilover spring supports a correctly selected suspension setup. This 100-250-1200 configuration is specified for 10-inch free length, 2.5-inch inner diameter, 1200 lb/in rate. Choose the complete configuration to match your spring, damper and intended use.
Key Features
- Nominal free length: 10 inches; inner diameter: 2.5 inches.
- Published spring rate: 1200 lb/in.
- Usable stroke: 3.8 inches; maximum stroke: 4.8 inches.
- Maximum spring load: 5,716 lb.
- Produced with Swift proprietary HS5.TW spring material.
- Designed as a zero ride height FRONT spring for Late Model Stock race suspension.
- Family design offers heavier rates, higher loads and a linear rate through working stroke.
- One individual Swift spring in the selected part-number configuration.
Application details and restrictions
Universal dimensional/component selection: 10-inch free length, 2.5-inch inner diameter, 1200 lb/in rate. Designed for Late Model Stock front suspension arrangements. This family is not the NASCAR Whelen Modified spring identified in some other Swift product families. No road-vehicle year/make/model or fixed lowering amount is assigned. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.
Specifications
| Brand | Swift Springs |
|---|---|
| Manufacturer Part Number | 100-250-1200 |
| Product Family | Zero Ride Height Front Coilover Spring |
| Package | One individual Swift spring in the selected part-number configuration |
| Free Length | 10 in |
| Inner Diameter | 2.5 in |
| Spring Rate | 1200 lb/in |
| Usable Stroke | 3.8 in |
| Maximum Stroke | 4.8 in |
| Maximum Spring Load | 5,716 lb |
| Material | Swift proprietary HS5.TW spring material |
| Condition | New |
What's Included
One individual Swift spring in the selected part-number configuration. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.
Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration.
About Swift Springs
Swift develops springs and supporting components for motorsports and vehicle-specific suspension tuning. Its range includes main springs, helper springs, bump-spring systems, guides, adapters and protective accessories. Each family has distinct selection requirements. Use the complete part number, published dimensions, package contents and intended application to build a compatible arrangement. Results depend on the full chassis and damper setup.
Related Parts
10-inch length | 2.5-inch inner diameter Standard Coilover Front Springs
FAQ
What is the 100-250-1200?A Swift zero ride height front coilover spring specified for 10-inch free length, 2.5-inch inner diameter, 1200 lb/in rate.
What is included?One individual Swift spring in the selected part-number configuration. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.
Does Universal Fit establish vehicle fitment?Universal dimensional/component selection: 10-inch free length, 2.5-inch inner diameter, 1200 lb/in rate. Designed for Late Model Stock front suspension arrangements. This family is not the NASCAR Whelen Modified spring identified in some other Swift product families. No road-vehicle year/make/model or fixed lowering amount is assigned. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.
Which dimensions and interfaces should I check?Match the complete part number and published application dimensions to the actual spring, seat and damper arrangement. Confirm component generation, retention and the working range rather than assuming a shared brand name or nominal inch label establishes compatibility.
Which family-specific design notes apply?Nominal free length: 10 inches; inner diameter: 2.5 inches. Published spring rate: 1200 lb/in. Usable stroke: 3.8 inches; maximum stroke: 4.8 inches. Maximum spring load: 5,716 lb. Produced with Swift proprietary HS5.TW spring material. Designed as a zero ride height FRONT spring for Late Model Stock race suspension. Family design offers heavier rates, higher loads and a linear rate through working stroke.
Can this be installed without checking the rest of the suspension?The complete suspension arrangement determines compatibility and behavior. Inspect supporting parts, installed height, seating, engagement and travel. This part does not establish an alignment setting, fixed lowering amount or complete suspension conversion.
Does the hero photo show this exact specification?Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration.
What should be checked before use?Use a qualified race suspension technician. Unload spring tension safely, match the spring-seat interface, free length and rate, and inspect the damper and supporting hardware. Verify seating, full-droop retention and clearances through the working compression and rebound range. Do not use maximum spring load as a vehicle payload or axle rating.
Installation Instructions
Use a qualified race suspension technician. Unload spring tension safely, match the spring-seat interface, free length and rate, and inspect the damper and supporting hardware. Verify seating, full-droop retention and clearances through the working compression and rebound range. Do not use maximum spring load as a vehicle payload or axle rating.




