View vehicle applications
Fitment notes and restrictions
Description
Match the Spring to Your Race Setup
Swift 100-500-375 is an individual conventional rear spring with 10-inch nominal free length, 5-inch outside diameter and a published 375 lb/in spring rate. Match the spring seats, required corner specification and full travel requirements to the chassis setup. The intended position is rear.
Key Features
- One individual spring; nominal free length 10 in and outside diameter 5 in.
- Published spring rate: 375 lb/in.
- Usable stroke: 6.2 in; maximum stroke: 7.0 in.
- Published maximum spring load: 2,643 lb.
- Swift proprietary HS5.TW spring material.
- Swift identifies this rear family for dimension-matched CARS Tour, Late Model and Pro Late Model setups.
- Rear family is designed to load quickly, with 1.5-inch coil spacing and suitability for spring rubbers.
Application details and restrictions
Universal dimensional selection for a compatible race suspension or component arrangement. This 5-inch value is OUTSIDE diameter; it is not a coilover inner-diameter specification. Match the spring-seat shape, complete installed envelope, nominal free length, rate, available travel and retention through full suspension movement. Check spring clearance, supporting components and the chassis manufacturer’s setup requirements. Intended position/application: Rear. No vehicle year/make/model coverage or fixed ride-height lowering amount is assigned. Race-series family notes do not replace a dimensional and chassis setup check.
Specifications
| Brand | Swift Springs |
|---|---|
| Manufacturer Part Number | 100-500-375 |
| Product Family | Standard Conventional Rear Spring |
| Quantity | One spring / sold individually |
| Nominal Free Length | 10 in |
| Outside Diameter | 5 in |
| Published Spring Rate | 375 lb/in |
| Usable Stroke | 6.2 in |
| Maximum Stroke | 7.0 in |
| Published Maximum Spring Load | 2,643 lb |
| Intended Position / Application | Rear |
| Material | Swift proprietary HS5.TW spring material |
| Condition | New |
What's Included
One Swift conventional spring in this part-number configuration. The selling price and displayed retail price are for one spring. Additional springs, dampers, perches, adapters, spring rubbers, bump rubbers and installation hardware are not listed as included. Order supporting components separately after confirming the complete setup.
Representative family photo: the hero shows one Swift rear conventional spring from the 5-inch outside-diameter family. Actual free length, coil spacing, wire diameter, geometry and printed markings vary by selected part number. Select by the full part number and published specifications rather than the apparent dimensions or printed rate in the photograph.
About Swift Springs
Swift develops conventional race springs and other dimension-selected spring configurations for motorsports suspension tuning. Its conventional range includes front and rear designs, high-travel springs, Bulletproof and Tight Helix families, and progressive or pull-bar configurations. Select the family intended for the chassis arrangement and match the complete published specification. Spring choice, corner load, supporting components and installation all affect the finished setup.
Related Parts
Swift conventional spring specification chart
10in Standard Conventional Rear Springs
FAQ
What is the 100-500-375?One Swift conventional rear spring with 10-inch nominal free length, 5-inch outside diameter and published 375 lb/in rate.
How many springs are included?One Swift conventional spring in this part-number configuration. The selling price and displayed retail price are for one spring. Additional springs, dampers, perches, adapters, spring rubbers, bump rubbers and installation hardware are not listed as included. Order supporting components separately after confirming the complete setup.
Does Universal Fit establish vehicle fitment?Universal dimensional selection for a compatible race suspension or component arrangement. This 5-inch value is OUTSIDE diameter; it is not a coilover inner-diameter specification. Match the spring-seat shape, complete installed envelope, nominal free length, rate, available travel and retention through full suspension movement. Check spring clearance, supporting components and the chassis manufacturer’s setup requirements. Intended position/application: Rear. No vehicle year/make/model coverage or fixed ride-height lowering amount is assigned. Race-series family notes do not replace a dimensional and chassis setup check.
Is the listed diameter an inner or outer diameter?This is a 5-inch OUTSIDE-diameter conventional spring. Do not treat that value as a coilover spring inner diameter. Confirm seat shape and the full installed envelope with the chassis or component manufacturer.
Which special family or race notes apply?Swift identifies this rear family for dimension-matched CARS Tour, Late Model and Pro Late Model setups. Rear family is designed to load quickly, with 1.5-inch coil spacing and suitability for spring rubbers.
How should the stroke and load values be used?Published usable stroke: 6.2 in; maximum stroke: 7.0 in; maximum spring load: 2,643 lb. Maximum stroke is not a recommended operating target. The spring load value is not an axle rating, towing rating or vehicle payload allowance.
Does the photo show this exact rate and length?Representative family photo: the hero shows one Swift rear conventional spring from the 5-inch outside-diameter family. Actual free length, coil spacing, wire diameter, geometry and printed markings vary by selected part number. Select by the full part number and published specifications rather than the apparent dimensions or printed rate in the photograph.
Can it set a fixed lowering amount?No fixed lowering amount is assigned. Ride height and spring interaction depend on the spring-seat arrangement, installed height, corner loads and complete chassis setup. Use a qualified race suspension specialist for selection and installation.
Installation Instructions
Have a qualified race suspension technician follow the chassis and component manufacturer’s instructions. Safely unload stored spring tension before disassembly. Confirm the part number, outside diameter, free length, rate and intended arrangement. Inspect the seats and supporting components, verify retention and clearances through the full operating range, and stay within the published working limits. Confirm any spring-rubber or bump-rubber requirements for the specific family. Verify fastener torque, alignment and the complete chassis setup before operation.




