-15%
One Swift front 5 inch OD conventional spring, representative product-family photo
Click to zoom in
View vehicle applications

Description

Match the Spring to Your Race Setup

Swift 110-500-300 F is an individual conventional front spring with 11-inch nominal free length, 5-inch outside diameter and a published 300 lb/in spring rate. Match the spring seats, required corner specification and full travel requirements to the chassis setup. The intended position is front.

Key Features

  • One individual spring; nominal free length 11 in and outside diameter 5 in.
  • Published spring rate: 300 lb/in.
  • Usable stroke: 6.8 in; maximum stroke: 7.2 in.
  • Published maximum spring load: 2,180 lb.
  • Swift proprietary HS5.TW spring material.
  • 11-inch / 5-inch OD front family offered in six rates. Swift describes the design as reducing frame drag with lower spring rates while providing increased travel and compression/rebound response.

Application details and restrictions

Universal dimensional selection for a compatible race suspension or component arrangement. This 5-inch value is OUTSIDE diameter; it is not a coilover inner-diameter specification. Match the spring-seat shape, complete installed envelope, nominal free length, rate, available travel and retention through full suspension movement. Check spring clearance, supporting components and the chassis manufacturer’s setup requirements. Intended position/application: Front. No vehicle year/make/model coverage or fixed ride-height lowering amount is assigned. Race-series family notes do not replace a dimensional and chassis setup check.

Specifications

Brand Swift Springs
Manufacturer Part Number 110-500-300 F
Product Family Standard Conventional Front Spring
Quantity One spring / sold individually
Nominal Free Length 11 in
Outside Diameter 5 in
Published Spring Rate 300 lb/in
Usable Stroke 6.8 in
Maximum Stroke 7.2 in
Published Maximum Spring Load 2,180 lb
Intended Position / Application Front
Material Swift proprietary HS5.TW spring material
Condition New

What's Included

One Swift conventional spring in this part-number configuration. The selling price and displayed retail price are for one spring. Additional springs, dampers, perches, adapters, spring rubbers, bump rubbers and installation hardware are not listed as included. Order supporting components separately after confirming the complete setup.

Representative family photo: the hero shows one Swift front conventional spring from the 5-inch outside-diameter family. Actual free length, coil spacing, wire diameter, geometry and printed markings vary by selected part number. Select by the full part number and published specifications rather than the apparent dimensions or printed rate in the photograph.

About Swift Springs

Swift develops conventional race springs and other dimension-selected spring configurations for motorsports suspension tuning. Its conventional range includes front and rear designs, high-travel springs, Bulletproof and Tight Helix families, and progressive or pull-bar configurations. Select the family intended for the chassis arrangement and match the complete published specification. Spring choice, corner load, supporting components and installation all affect the finished setup.

Related Parts

Swift conventional spring specification chart

FAQ

What is the 110-500-300 F?

One Swift conventional front spring with 11-inch nominal free length, 5-inch outside diameter and published 300 lb/in rate.

How many springs are included?

One Swift conventional spring in this part-number configuration. The selling price and displayed retail price are for one spring. Additional springs, dampers, perches, adapters, spring rubbers, bump rubbers and installation hardware are not listed as included. Order supporting components separately after confirming the complete setup.

Does Universal Fit establish vehicle fitment?

Universal dimensional selection for a compatible race suspension or component arrangement. This 5-inch value is OUTSIDE diameter; it is not a coilover inner-diameter specification. Match the spring-seat shape, complete installed envelope, nominal free length, rate, available travel and retention through full suspension movement. Check spring clearance, supporting components and the chassis manufacturer’s setup requirements. Intended position/application: Front. No vehicle year/make/model coverage or fixed ride-height lowering amount is assigned. Race-series family notes do not replace a dimensional and chassis setup check.

Is the listed diameter an inner or outer diameter?

This is a 5-inch OUTSIDE-diameter conventional spring. Do not treat that value as a coilover spring inner diameter. Confirm seat shape and the full installed envelope with the chassis or component manufacturer.

Which special family or race notes apply?

11-inch / 5-inch OD front family offered in six rates. Swift describes the design as reducing frame drag with lower spring rates while providing increased travel and compression/rebound response.

How should the stroke and load values be used?

Published usable stroke: 6.8 in; maximum stroke: 7.2 in; maximum spring load: 2,180 lb. Maximum stroke is not a recommended operating target. The spring load value is not an axle rating, towing rating or vehicle payload allowance.

Does the photo show this exact rate and length?

Representative family photo: the hero shows one Swift front conventional spring from the 5-inch outside-diameter family. Actual free length, coil spacing, wire diameter, geometry and printed markings vary by selected part number. Select by the full part number and published specifications rather than the apparent dimensions or printed rate in the photograph.

Can it set a fixed lowering amount?

No fixed lowering amount is assigned. Ride height and spring interaction depend on the spring-seat arrangement, installed height, corner loads and complete chassis setup. Use a qualified race suspension specialist for selection and installation.

Installation Instructions

Have a qualified race suspension technician follow the chassis and component manufacturer’s instructions. Safely unload stored spring tension before disassembly. Confirm the part number, outside diameter, free length, rate and intended arrangement. Inspect the seats and supporting components, verify retention and clearances through the full operating range, and stay within the published working limits. Confirm any spring-rubber or bump-rubber requirements for the specific family. Verify fastener torque, alignment and the complete chassis setup before operation.

Swift 110-500-300 F Front Spring - 11in x 5in OD, 300lb/in

Swift Springs
110-500-300 F
Coil Springs
Special order
$ 141.00 $ 118.85
$ 118.85

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×