-38%
Swift 4H920R front and rear lowering spring set on a white background
Click to zoom in
View vehicle applications

Description

A Matched Spring Set for Acura TLX Type S

Swift Spec-R springs give the 2021-2025 Acura TLX Type S an application-specific ride-height and handling upgrade. This set combines 10.2 kgf/mm front and 7.4 kgf/mm rear spring rates with nominal lowering of 1.0 inch front and 1.0 inch rear. Select 4H920R by the supported chassis, factory suspension and application requirements below.

Key Features

  • Spec-R design intended to improve chassis control, steering response and cornering feel.
  • Front spring rate: 10.2 kgf/mm; rear spring rate: 7.4 kgf/mm.
  • Nominal lowering: 1.0 inch front and 1.0 inch rear.
  • Front and rear spring set for the stated vehicle application.
  • Designed around the supported factory damper arrangement; assess damper condition before installation.
  • Application-specific stance with street use considered alongside performance.

Application details and restrictions

Years Make Model Chassis
2021-2025 Acura TLX Type S UB7; Type S SH-AWD

For the 2021-2025 UB7 TLX Type S with its supported factory suspension. Standard 2.0T, Technology and A-Spec TLX versions are different applications. U.S. TLX production ended in 2025; no 2026 TLX Type S coverage is advertised.

Inspect existing suspension modifications before ordering. Nominal lowering is measured against the supported factory configuration; it is not a guaranteed measurement on every vehicle.

Specifications

Brand Swift Springs
Manufacturer Part Number 4H920R
Product Type Lowering Springs
Product Line Spec-R
Front Spring Rate 10.2 kgf/mm
Rear Spring Rate 7.4 kgf/mm
Nominal Front Lowering 1.0 in
Nominal Rear Lowering 1.0 in
Application Chassis UB7; Type S SH-AWD
Axle Coverage Front and rear
Condition New

What's Included

One Swift Spec-R front and rear spring set, manufacturer part number 4H920R. Dampers, mounts, isolators, bump stops and vehicle service hardware are not listed as included components of this spring set.

Photo note: The lead image represents the Swift Spec-R spring-set product family. Actual spring shape, dimensions and markings vary by application. Choose the set using the part number, fitment and specifications rather than the photo alone.

About Swift Springs

Swift develops performance springs for vehicle-specific and dimension-selected suspension applications. Its Spec-R line uses application-specific rates and ride-height targets to improve body control while considering usable suspension travel and street driving. Match 4H920R to the supported factory suspension; the Spec-R family name alone does not establish interchangeability.

Related Parts

Acura Swift Performance Springs

FAQ

What is the 4H920R?

It is the Swift Spec-R front and rear lowering spring set for the 2021-2025 Acura TLX Type S.

Which vehicle and chassis does this set fit?

For the 2021-2025 UB7 TLX Type S with its supported factory suspension. Standard 2.0T, Technology and A-Spec TLX versions are different applications. U.S. TLX production ended in 2025; no 2026 TLX Type S coverage is advertised.

How much does this set lower the vehicle?

Swift lists nominal lowering of 1.0 inch at the front and 1.0 inch at the rear. Final ride height varies with factory equipment, vehicle condition and the rest of the suspension setup.

What are the front and rear spring rates?

The front rate is 10.2 kgf/mm and the rear rate is 7.4 kgf/mm. Compare front and rear specifications separately when planning suspension changes.

Can the factory dampers be retained?

The application is developed around the supported factory suspension. Have the installer assess damper wear and usable travel. Compatibility with every aftermarket coilover, modified spring seat or damper conversion is not implied.

Are shocks, mounts and installation hardware included?

This listing is for the spring set. Additional suspension components and vehicle service hardware are not listed as included; inspect and replace worn or single-use items as required by the vehicle service procedure.

Is an alignment needed after installation?

Complete a professional four-wheel alignment after installation and settling. Check spring seating, suspension travel, tire clearance and all fasteners before normal driving.

Does the spring-set photo show the exact application?

The lead photo represents the Swift Spec-R product family. Spring shape, dimensions and markings can differ for the selected application; the specifications and fitment determine the correct set.

Installation Instructions

Confirm 4H920R and the complete vehicle application before work begins. Have a qualified installer follow the current Swift instructions and the vehicle manufacturer’s service procedure. Use an appropriate spring compressor where required. Inspect mounts, isolators, bump stops and dampers, replace any single-use hardware, and torque fasteners at the specified suspension position. Verify spring seating, suspension travel, brake-line and tire clearance, then complete a professional alignment after installation and settling.

Swift Spec-R Springs - 2021-2025 Acura TLX Type S

Swift Springs
4H920R
Lowering Springs
Special order
$ 580.00 $ 354.45
$ 354.45

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×