View vehicle applications
Fitment notes and restrictions
Description
A Matched Spring Set for Lexus GS350 RWD
Swift Sport springs give the 2013-2020 Lexus GS350 RWD an application-specific ride-height and handling upgrade. This set combines 5.0 kgf/mm front and 7.5 kgf/mm rear spring rates with nominal lowering of 0.8 inch front and 0.8 inch rear. Select 4T911 by the supported chassis, factory suspension and application requirements below.
Key Features
- Sport design intended to improve chassis control, steering response and cornering feel.
- Front spring rate: 5.0 kgf/mm; rear spring rate: 7.5 kgf/mm.
- Nominal lowering: 0.8 inch front and 0.8 inch rear.
- Front and rear spring set for the stated vehicle application.
- Designed around the supported factory damper arrangement; assess damper condition before installation.
- Application-specific stance with street use considered alongside performance.
Application details and restrictions
| Years | Make | Model | Chassis |
|---|---|---|---|
| 2013-2020 | Lexus | GS350 | GRL10; RWD |
For 2013-2020 rear-wheel-drive GS350 with the supported factory spring-seat and damper arrangement. AWD GS350, GS450h hybrid, GS F and earlier GS generations are excluded. F Sport is a trim package and does not make a GS350 the separate GS F application.
Inspect existing suspension modifications before ordering. Nominal lowering is measured against the supported factory configuration; it is not a guaranteed measurement on every vehicle.
Specifications
| Brand | Swift Springs |
|---|---|
| Manufacturer Part Number | 4T911 |
| Product Type | Lowering Springs |
| Product Line | Sport |
| Front Spring Rate | 5.0 kgf/mm |
| Rear Spring Rate | 7.5 kgf/mm |
| Nominal Front Lowering | 0.8 in |
| Nominal Rear Lowering | 0.8 in |
| Application Chassis | GRL10; RWD |
| Axle Coverage | Front and rear |
| Condition | New |
What's Included
One Swift Sport front and rear spring set, manufacturer part number 4T911. Dampers, mounts, isolators, bump stops and vehicle service hardware are not listed as included components of this spring set.
Photo note: The lead image represents the Swift Sport spring-set product family. Actual spring shape, dimensions and markings vary by application. Choose the set using the part number, fitment and specifications rather than the photo alone.
About Swift Springs
Swift develops performance springs for vehicle-specific and dimension-selected suspension applications. Its Sport line uses application-specific rates and ride-height targets to improve body control while considering usable suspension travel and street driving. Match 4T911 to the supported factory suspension; the Sport family name alone does not establish interchangeability.
Related Parts
Lexus Swift Performance Springs
FAQ
What is the 4T911?It is the Swift Sport front and rear lowering spring set for the 2013-2020 Lexus GS350 RWD.
Which vehicle and chassis does this set fit?For 2013-2020 rear-wheel-drive GS350 with the supported factory spring-seat and damper arrangement. AWD GS350, GS450h hybrid, GS F and earlier GS generations are excluded. F Sport is a trim package and does not make a GS350 the separate GS F application.
How much does this set lower the vehicle?Swift lists nominal lowering of 0.8 inch at the front and 0.8 inch at the rear. Final ride height varies with factory equipment, vehicle condition and the rest of the suspension setup.
What are the front and rear spring rates?The front rate is 5.0 kgf/mm and the rear rate is 7.5 kgf/mm. Compare front and rear specifications separately when planning suspension changes.
Can the factory dampers be retained?The application is developed around the supported factory suspension. Have the installer assess damper wear and usable travel. Compatibility with every aftermarket coilover, modified spring seat or damper conversion is not implied.
Are shocks, mounts and installation hardware included?This listing is for the spring set. Additional suspension components and vehicle service hardware are not listed as included; inspect and replace worn or single-use items as required by the vehicle service procedure.
Is an alignment needed after installation?Complete a professional four-wheel alignment after installation and settling. Check spring seating, suspension travel, tire clearance and all fasteners before normal driving.
Does the spring-set photo show the exact application?The lead photo represents the Swift Sport product family. Spring shape, dimensions and markings can differ for the selected application; the specifications and fitment determine the correct set.
Installation Instructions
Confirm 4T911 and the complete vehicle application before work begins. Have a qualified installer follow the current Swift instructions and the vehicle manufacturer’s service procedure. Use an appropriate spring compressor where required. Inspect mounts, isolators, bump stops and dampers, replace any single-use hardware, and torque fasteners at the specified suspension position. Verify spring seating, suspension travel, brake-line and tire clearance, then complete a professional alignment after installation and settling.




