-38%
Swift 4X903R front and rear lowering spring set on a white background
Click to zoom in
View vehicle applications

Description

A Matched Spring Set for BMW M3 Sedan / 2008-2013 M3 Coupe

Swift Spec-R springs give the 2008-2011 BMW M3 Sedan / 2008-2013 M3 Coupe an application-specific ride-height and handling upgrade. This set combines 5.0 kgf/mm front and 12.0 kgf/mm rear spring rates with nominal lowering of 1.0 inch front and 0.7 inch rear. Select 4X903R by the supported chassis, factory suspension and application requirements below.

Key Features

  • Spec-R design intended to improve chassis control, steering response and cornering feel.
  • Front spring rate: 5.0 kgf/mm; rear spring rate: 12.0 kgf/mm.
  • Nominal lowering: 1.0 inch front and 0.7 inch rear.
  • Front and rear spring set for the stated vehicle application.
  • Designed around the supported factory damper arrangement; assess damper condition before installation.
  • Application-specific stance with street use considered alongside performance.

Application details and restrictions

Years Make Model Chassis
2008-2011 BMW M3 E90 sedan
2008-2013 BMW M3 E92 coupe

For E90 M3 sedans and E92 M3 coupes within their separate listed U.S. model-year ranges. The E93 convertible is excluded because Swift’s application chart and M3 press-release title establish E90/E92 coverage; the broader E93 wording on its product page is not used to add convertible fitment. F80 and other M3 generations are different applications.

Inspect existing suspension modifications before ordering. Nominal lowering is measured against the supported factory configuration; it is not a guaranteed measurement on every vehicle.

Specifications

Brand Swift Springs
Manufacturer Part Number 4X903R
Product Type Lowering Springs
Product Line Spec-R
Front Spring Rate 5.0 kgf/mm
Rear Spring Rate 12.0 kgf/mm
Nominal Front Lowering 1.0 in
Nominal Rear Lowering 0.7 in
Application Chassis E90 sedan; E92 coupe
Axle Coverage Front and rear
Condition New

What's Included

One Swift Spec-R front and rear spring set, manufacturer part number 4X903R. Dampers, mounts, isolators, bump stops and vehicle service hardware are not listed as included components of this spring set.

Photo note: The lead image represents the Swift Spec-R spring-set product family. Actual spring shape, dimensions and markings vary by application. Choose the set using the part number, fitment and specifications rather than the photo alone.

About Swift Springs

Swift develops performance springs for vehicle-specific and dimension-selected suspension applications. Its Spec-R line uses application-specific rates and ride-height targets to improve body control while considering usable suspension travel and street driving. Match 4X903R to the supported factory suspension; the Spec-R family name alone does not establish interchangeability.

Related Parts

BMW Swift Performance Springs

FAQ

What is the 4X903R?

It is the Swift Spec-R front and rear lowering spring set for the 2008-2011 BMW M3 Sedan / 2008-2013 M3 Coupe.

Which vehicle and chassis does this set fit?

For E90 M3 sedans and E92 M3 coupes within their separate listed U.S. model-year ranges. The E93 convertible is excluded because Swift’s application chart and M3 press-release title establish E90/E92 coverage; the broader E93 wording on its product page is not used to add convertible fitment. F80 and other M3 generations are different applications.

How much does this set lower the vehicle?

Swift lists nominal lowering of 1.0 inch at the front and 0.7 inch at the rear. Final ride height varies with factory equipment, vehicle condition and the rest of the suspension setup.

What are the front and rear spring rates?

The front rate is 5.0 kgf/mm and the rear rate is 12.0 kgf/mm. Compare front and rear specifications separately when planning suspension changes.

Can the factory dampers be retained?

The application is developed around the supported factory suspension. Have the installer assess damper wear and usable travel. Compatibility with every aftermarket coilover, modified spring seat or damper conversion is not implied.

Are shocks, mounts and installation hardware included?

This listing is for the spring set. Additional suspension components and vehicle service hardware are not listed as included; inspect and replace worn or single-use items as required by the vehicle service procedure.

Is an alignment needed after installation?

Complete a professional four-wheel alignment after installation and settling. Check spring seating, suspension travel, tire clearance and all fasteners before normal driving.

Does the spring-set photo show the exact application?

The lead photo represents the Swift Spec-R product family. Spring shape, dimensions and markings can differ for the selected application; the specifications and fitment determine the correct set.

Installation Instructions

Confirm 4X903R and the complete vehicle application before work begins. Have a qualified installer follow the current Swift instructions and the vehicle manufacturer’s service procedure. Use an appropriate spring compressor where required. Inspect mounts, isolators, bump stops and dampers, replace any single-use hardware, and torque fasteners at the specified suspension position. Verify spring seating, suspension travel, brake-line and tire clearance, then complete a professional alignment after installation and settling.

Swift Spec-R Springs - 2008-2011 BMW M3 Sedan / 2008-2013 M3 Coupe

Swift Springs
4X903R
Lowering Springs
Special order
$ 530.00 $ 323.89
$ 323.89

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×