-38%
Swift Spec-R black lowering spring set, representative product-family photo
Click to zoom in
View vehicle applications

Description

A Matched Spring Set for BMW 335i Sedan / 2007-2013 335i Coupe RWD

Swift Spec-R springs give the 2007-2011 BMW 335i Sedan / 2007-2013 335i Coupe RWD an application-specific ride-height and handling upgrade. This set combines 4.0 kgf/mm front and 11.0 kgf/mm rear spring rates with nominal lowering of 1.0 inch front and 0.8 inch rear. Select 4X905R by the supported chassis, factory suspension and application requirements below.

Key Features

  • Spec-R design intended to improve chassis control, steering response and cornering feel.
  • Front spring rate: 4.0 kgf/mm; rear spring rate: 11.0 kgf/mm.
  • Nominal lowering: 1.0 inch front and 0.8 inch rear.
  • Front and rear spring set for the stated vehicle application.
  • Designed around the supported factory damper arrangement; assess damper condition before installation.
  • Application-specific stance with street use considered alongside performance.

Application details and restrictions

Years Make Model Chassis
2007-2011 BMW 335i E90 sedan; RWD
2007-2013 BMW 335i E92 coupe; RWD

For rear-wheel-drive E90 335i sedans and E92 335i coupes within their separate listed U.S. model-year ranges. xDrive/xi, E93 convertibles, F30 sedans and other engine/model applications are excluded. Swift’s application chart lists E90/E92; broader convertible wording on its product page is not used to add E93 fitment.

Inspect existing suspension modifications before ordering. Nominal lowering is measured against the supported factory configuration; it is not a guaranteed measurement on every vehicle.

Specifications

Brand Swift Springs
Manufacturer Part Number 4X905R
Product Type Lowering Springs
Product Line Spec-R
Front Spring Rate 4.0 kgf/mm
Rear Spring Rate 11.0 kgf/mm
Nominal Front Lowering 1.0 in
Nominal Rear Lowering 0.8 in
Application Chassis E90 sedan; RWD; E92 coupe; RWD
Axle Coverage Front and rear
Condition New

What's Included

One Swift Spec-R front and rear spring set, manufacturer part number 4X905R. Dampers, mounts, isolators, bump stops and vehicle service hardware are not listed as included components of this spring set.

Photo note: The lead image represents the Swift Spec-R spring-set product family. Actual spring shape, dimensions and markings vary by application. Choose the set using the part number, fitment and specifications rather than the photo alone.

About Swift Springs

Swift develops performance springs for vehicle-specific and dimension-selected suspension applications. Its Spec-R line uses application-specific rates and ride-height targets to improve body control while considering usable suspension travel and street driving. Match 4X905R to the supported factory suspension; the Spec-R family name alone does not establish interchangeability.

Related Parts

BMW Swift Performance Springs

FAQ

What is the 4X905R?

It is the Swift Spec-R front and rear lowering spring set for the 2007-2011 BMW 335i Sedan / 2007-2013 335i Coupe RWD.

Which vehicle and chassis does this set fit?

For rear-wheel-drive E90 335i sedans and E92 335i coupes within their separate listed U.S. model-year ranges. xDrive/xi, E93 convertibles, F30 sedans and other engine/model applications are excluded. Swift’s application chart lists E90/E92; broader convertible wording on its product page is not used to add E93 fitment.

How much does this set lower the vehicle?

Swift lists nominal lowering of 1.0 inch at the front and 0.8 inch at the rear. Final ride height varies with factory equipment, vehicle condition and the rest of the suspension setup.

What are the front and rear spring rates?

The front rate is 4.0 kgf/mm and the rear rate is 11.0 kgf/mm. Compare front and rear specifications separately when planning suspension changes.

Can the factory dampers be retained?

The application is developed around the supported factory suspension. Have the installer assess damper wear and usable travel. Compatibility with every aftermarket coilover, modified spring seat or damper conversion is not implied.

Are shocks, mounts and installation hardware included?

This listing is for the spring set. Additional suspension components and vehicle service hardware are not listed as included; inspect and replace worn or single-use items as required by the vehicle service procedure.

Is an alignment needed after installation?

Complete a professional four-wheel alignment after installation and settling. Check spring seating, suspension travel, tire clearance and all fasteners before normal driving.

Does the spring-set photo show the exact application?

The lead photo represents the Swift Spec-R product family. Spring shape, dimensions and markings can differ for the selected application; the specifications and fitment determine the correct set.

Installation Instructions

Confirm 4X905R and the complete vehicle application before work begins. Have a qualified installer follow the current Swift instructions and the vehicle manufacturer’s service procedure. Use an appropriate spring compressor where required. Inspect mounts, isolators, bump stops and dampers, replace any single-use hardware, and torque fasteners at the specified suspension position. Verify spring seating, suspension travel, brake-line and tire clearance, then complete a professional alignment after installation and settling.

Swift Spec-R Springs - 2007-2011 BMW 335i Sedan / 2007-2013 335i Coupe RWD

Swift Springs
4X905R
Lowering Springs
Special order
$ 530.00 $ 323.89
$ 323.89

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×