-26%
Swift thrust sheet kit with four self-lubricating sheets and four stainless steel washers
Click to zoom in
View vehicle applications

Description

Let Your Coilover Springs Rotate Smoothly

The Swift thrust sheet kit supports a correctly selected suspension setup. This 544202 configuration is specified for 65 mm spring inner-diameter application (approximately 2.56 inches). It helps reduce spring binding and noise while preserving the correct seating arrangement.

Key Features

  • Reduces friction and unwanted spring noise as the spring rotates against its perch under compression.
  • Helps distribute spring load more evenly and relieve binding associated with spring winding.
  • Choose the 65 mm application by the actual spring and perch interface.
  • One kit services two springs.
  • The Swift thrust-sheet range offers 60 mm, 65 mm and 70 mm application sizes.
  • One kit: four self-lubricating thrust sheets and four stainless-steel washer sheets; enough for two springs.

Application details and restrictions

Universal dimensional/component selection: 65 mm spring inner-diameter application (approximately 2.56 inches). Swift’s U.S. catalog uses nominal inch family labels alongside metric sizes. The metric application above is the selection dimension; inch approximations are calculated from millimeters and are not a claim that different spring-seat diameters interchange. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.

Specifications

Brand Swift Springs
Manufacturer Part Number 544202
Product Family Thrust Sheet Kit
Package One kit: four self-lubricating thrust sheets and four stainless-steel washer sheets; enough for two springs
Spring Inner-Diameter Application 65 mm / approximately 2.56 in
Kit Coverage Two springs
Included Thrust Sheets Four
Included Stainless-Steel Washer Sheets Four
Condition New
Materials Self-lubricating thrust sheets and stainless-steel washer sheets

What's Included

One kit: four self-lubricating thrust sheets and four stainless-steel washer sheets; enough for two springs. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.

Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration.

About Swift Springs

Swift develops springs and supporting components for motorsports and vehicle-specific suspension tuning. Its range includes main springs, helper springs, bump-spring systems, guides, adapters and protective accessories. Each family has distinct selection requirements. Use the complete part number, published dimensions, package contents and intended application to build a compatible arrangement. Results depend on the full chassis and damper setup.

Related Parts

    Thrust Sheets

    Swift manufacturer thrust-sheet specifications and placement

    FAQ

    What is the 544202?

    A Swift thrust sheet kit specified for 65 mm spring inner-diameter application (approximately 2.56 inches).

    What is included?

    One kit: four self-lubricating thrust sheets and four stainless-steel washer sheets; enough for two springs. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.

    Does Universal Fit establish vehicle fitment?

    Universal dimensional/component selection: 65 mm spring inner-diameter application (approximately 2.56 inches). Swift’s U.S. catalog uses nominal inch family labels alongside metric sizes. The metric application above is the selection dimension; inch approximations are calculated from millimeters and are not a claim that different spring-seat diameters interchange. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.

    Which dimensions and interfaces should I check?

    Match the complete part number and published application dimensions to the actual spring, seat and damper arrangement. Confirm component generation, retention and the working range rather than assuming a shared brand name or nominal inch label establishes compatibility.

    Which family-specific design notes apply?

    Reduces friction and unwanted spring noise as the spring rotates against its perch under compression. Helps distribute spring load more evenly and relieve binding associated with spring winding. Choose the 65 mm application by the actual spring and perch interface. One kit services two springs. The Swift thrust-sheet range offers 60 mm, 65 mm and 70 mm application sizes.

    Can this be installed without checking the rest of the suspension?

    The complete suspension arrangement determines compatibility and behavior. Inspect supporting parts, installed height, seating, engagement and travel. This part does not establish an alignment setting, fixed lowering amount or complete suspension conversion.

    Does the hero photo show this exact specification?

    Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration.

    What should be checked before use?

    Follow Swift’s placement instructions: put the resin thrust sheet against the spring seat and the stainless-steel sheet against the spring. Check the complete perch interface, retention and clearance. Do not substitute these sheets for any required spring seat or structural hardware.

    Installation Instructions

    Follow Swift’s placement instructions: put the resin thrust sheet against the spring seat and the stainless-steel sheet against the spring. Check the complete perch interface, retention and clearance. Do not substitute these sheets for any required spring seat or structural hardware.

    Swift 544202 Thrust Sheet Kit - 65 mm spring inner-diameter application (approximately 2.56 inches)

    Swift Springs
    544202
    Coilover Components
    Special order
    $ 35.00 $ 25.81
    $ 25.81

    Military & First Responders

    Military & First Responders

    A program for military members and first responders, with dedicated verification and support for your next build.

    Learn More & Apply

    Your cart

    ×