View vehicle applications
Fitment notes and restrictions
Description
Tune a Controlled Dual-Rate Bump Spring Stack
The Swift bump spring stacker kit supports a correctly selected suspension setup. This BST configuration is specified for Compatible Swift flat-wire bump-spring stacks on 1/2-inch, 14 mm or 5/8-inch shock shafts using the matching included bushings. Choose the complete configuration to match your spring, damper and intended use.
Key Features
- Designed for combinations of Swift flat-wire bump springs.
- Supports progressive or digressive stack arrangements without spring rubbers.
- 1/16-inch load-adjustment increments support repeatable setup.
- Adjustable lockout nut lets the lower bump spring be locked out at the chosen compression point for a true dual-rate arrangement.
- Includes all six shaft bushings across the three listed shaft-size applications.
- One kit: bump spring tower, bump spring divider, lockout nut and six shaft bushings covering 1/2-inch, 14 mm and 5/8-inch shaft applications.
Application details and restrictions
Universal dimensional/component selection: Compatible Swift flat-wire bump-spring stacks on 1/2-inch, 14 mm or 5/8-inch shock shafts using the matching included bushings. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.
Specifications
| Brand | Swift Springs |
|---|---|
| Manufacturer Part Number | BST |
| Product Family | Bump Spring Stacker Kit |
| Package | One kit: bump spring tower, bump spring divider, lockout nut and six shaft bushings covering 1/2-inch, 14 mm and 5/8-inch shaft applications |
| Included Tower | One |
| Included Divider | One |
| Included Lockout Nut | One |
| Included Shaft Bushings | Six |
| Shaft Applications | 1/2 in, 14 mm, 5/8 in |
| Adjustment Increment | 1/16 in |
| Condition | New |
What's Included
One kit: bump spring tower, bump spring divider, lockout nut and six shaft bushings covering 1/2-inch, 14 mm and 5/8-inch shaft applications. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.
Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration.
About Swift Springs
Swift develops springs and supporting components for motorsports and vehicle-specific suspension tuning. Its range includes main springs, helper springs, bump-spring systems, guides, adapters and protective accessories. Each family has distinct selection requirements. Use the complete part number, published dimensions, package contents and intended application to build a compatible arrangement. Results depend on the full chassis and damper setup.
Related Parts
FAQ
What is the BST?A Swift bump spring stacker kit specified for Compatible Swift flat-wire bump-spring stacks on 1/2-inch, 14 mm or 5/8-inch shock shafts using the matching included bushings.
What is included?One kit: bump spring tower, bump spring divider, lockout nut and six shaft bushings covering 1/2-inch, 14 mm and 5/8-inch shaft applications. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.
Does Universal Fit establish vehicle fitment?Universal dimensional/component selection: Compatible Swift flat-wire bump-spring stacks on 1/2-inch, 14 mm or 5/8-inch shock shafts using the matching included bushings. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.
Which dimensions and interfaces should I check?Match the complete part number and published application dimensions to the actual spring, seat and damper arrangement. Confirm component generation, retention and the working range rather than assuming a shared brand name or nominal inch label establishes compatibility.
Which family-specific design notes apply?Designed for combinations of Swift flat-wire bump springs. Supports progressive or digressive stack arrangements without spring rubbers. 1/16-inch load-adjustment increments support repeatable setup. Adjustable lockout nut lets the lower bump spring be locked out at the chosen compression point for a true dual-rate arrangement. Includes all six shaft bushings across the three listed shaft-size applications.
Can this be installed without checking the rest of the suspension?The complete suspension arrangement determines compatibility and behavior. Inspect supporting parts, installed height, seating, engagement and travel. This part does not establish an alignment setting, fixed lowering amount or complete suspension conversion.
Does the hero photo show this exact specification?Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration.
What should be checked before use?Have a race suspension technician select compatible Swift flat-wire bump springs and the correct bushings for the measured shaft. Follow the chassis and damper instructions to set stack order, engagement and lockout point. Verify seating, full-travel clearance and secure lockout adjustment before operation.
Installation Instructions
Have a race suspension technician select compatible Swift flat-wire bump springs and the correct bushings for the measured shaft. Follow the chassis and damper instructions to set stack order, engagement and lockout point. Verify seating, full-travel clearance and secure lockout adjustment before operation.




