View vehicle applications
Fitment notes and restrictions
Description
Tune the Secondary Spring to Your Chassis
Swift SBS1000 VS is an individual flat-wire progressive bump spring with 3.0-inch nominal free length, 2.3-inch outside diameter and a published 500-1000 lb/in progressive spring rate. Match the spring interface, available travel and required engagement behavior to the complete suspension setup. This part is a bump or secondary spring configuration; it is not a vehicle-specific main lowering-spring kit.
Key Features
- One individual flat-wire progressive bump spring; 3.0-inch nominal free length.
- 2.3-inch outside diameter; published progressive rate 500-1000 lb/in.
- Published stroke: 1.46 in.
- Swift describes its bump springs as resistant to fatigue and heat.
- Made using Swift proprietary HS5.TW spring material.
- Flat-wire design is intended to provide additional usable shock travel and controlled compression without side shearing.
- This is the progressive flat-wire configuration; retain both published rate values when matching the complete bump-spring arrangement.
Application details and restrictions
Universal dimensional selection for a compatible race suspension arrangement. Match 2.3-inch outside diameter, 3.0-inch nominal free length, the complete 500-1000 lb/in rate specification and published 1.46-inch stroke. Verify the spring seats, shock shaft, retainers, any required perch or stacker, and the full operating envelope. Check spring engagement, retention and clearances through compression and rebound with the chassis and damper manufacturer. No vehicle year/make/model coverage or fixed lowering amount is assigned. The required corner and spring arrangement depend on the chassis setup.
Specifications
| Brand | Swift Springs |
|---|---|
| Manufacturer Part Number | SBS1000 VS |
| Product Family | Flat-Wire Progressive Bump Springs |
| Quantity | One spring / sold individually |
| Nominal Free Length | 3.0 in |
| Outside Diameter | 2.3 in |
| Published Spring Rate | 500-1000 lb/in |
| Rate Type | Progressive |
| Published Stroke | 1.46 in |
| Material | Swift proprietary HS5.TW spring material |
| Condition | New |
What's Included
One Swift flat-wire progressive bump spring in this part-number configuration. The selling price and displayed retail price are for one spring. Additional springs, shocks, spring perches, retainers, stackers, shaft bushings, spring rubbers and installation hardware are not listed as included. Select any supporting parts separately for the complete arrangement.
Representative family photo: the hero shows one Swift flat-wire progressive bump spring. Actual free length, wire section, coil spacing, coil count, geometry and printed markings vary with the selected part number. The photograph is not a scale drawing. Match the full part number and published dimensions rather than the apparent image size. Swift identifies its source photo example as a 1200lbs/inch spring rate.
About Swift Springs
Swift develops springs for motorsports suspension tuning, including conventional and coilover main springs, helper configurations and bump or secondary springs. Its bump-spring range includes round-wire, flat-wire, short and progressive designs, with distinct rate and travel specifications. Swift uses its proprietary material and family-specific designs to support consistent suspension response. Select the configuration by its complete part number, interface dimensions and published working travel. Results depend on the damper, main spring, corner loads, chassis setup and installation.
Related Parts
3" Length | 2.3" OD Flat Wire Progressive Bump Springs
FAQ
What is the SBS1000 VS?One Swift flat-wire progressive bump spring with 3.0-inch nominal free length, 2.3-inch outside diameter and published 500-1000 lb/in progressive rate.
How many springs are included?One Swift flat-wire progressive bump spring in this part-number configuration. The selling price and displayed retail price are for one spring. Additional springs, shocks, spring perches, retainers, stackers, shaft bushings, spring rubbers and installation hardware are not listed as included. Select any supporting parts separately for the complete arrangement.
Does Universal Fit establish vehicle fitment?Universal dimensional selection for a compatible race suspension arrangement. Match 2.3-inch outside diameter, 3.0-inch nominal free length, the complete 500-1000 lb/in rate specification and published 1.46-inch stroke. Verify the spring seats, shock shaft, retainers, any required perch or stacker, and the full operating envelope. Check spring engagement, retention and clearances through compression and rebound with the chassis and damper manufacturer. No vehicle year/make/model coverage or fixed lowering amount is assigned. The required corner and spring arrangement depend on the chassis setup.
Is the listed diameter inside or outside?This configuration uses a 2.3-inch OUTSIDE-diameter specification. Inner diameter and outside diameter are different measurements. Confirm the spring-seat shape, supporting hardware and clearance requirements before choosing a configuration.
Which family-specific notes apply?Swift describes its bump springs as resistant to fatigue and heat. Made using Swift proprietary HS5.TW spring material. Flat-wire design is intended to provide additional usable shock travel and controlled compression without side shearing. This is the progressive flat-wire configuration; retain both published rate values when matching the complete bump-spring arrangement.
How should the travel specification be used?Swift publishes 1.46 inches of stroke. Confirm spring engagement, installed height, shock travel and the complete compression/rebound range with the suspension specialist. Do not assume the spring replaces a retainer, travel limiter or other required component.
Does the photo show this exact configuration?Representative family photo: the hero shows one Swift flat-wire progressive bump spring. Actual free length, wire section, coil spacing, coil count, geometry and printed markings vary with the selected part number. The photograph is not a scale drawing. Match the full part number and published dimensions rather than the apparent image size. Swift identifies its source photo example as a 1200lbs/inch spring rate.
Can this replace a complete lowering-spring kit?This listing is an individual dimension-selected race suspension component. It has no fixed vehicle lowering amount. Choose the complete main-spring and bump-spring combination using corner loads, installed heights, damper travel and the chassis manufacturer’s setup requirements.
Installation Instructions
Have a qualified race suspension technician follow the chassis, damper and component manufacturer’s instructions. Safely unload stored spring tension before disassembly. Confirm the part number, wire type, spring-seat interface, free length, rate and required travel. Inspect the shaft, spring seats, retainers and other supporting components. Verify seating and retention through full movement, set engagement and installed height to the chassis requirements, and confirm clearances without exceeding the published working limits. Check fastener torque and the complete suspension setup before operation.




