-17%
Swift stacked spring adapter and washer assembly, representative metric adapter kit
Click to zoom in
View vehicle applications

Description

Build a Smoothly Moving Spring Stack

The Swift stacked spring adapter kit supports a correctly selected suspension setup. This SP70 configuration is specified for 70 mm inner-diameter application (approximately 2.76 inches). It helps reduce spring binding and noise while preserving the correct seating arrangement.

Key Features

  • Designed to stack compatible helper or assist springs with a main spring, including flat-wire and round-wire combinations.
  • Allows spring unwinding during compression to reduce binding and noise.
  • Lightweight adapter material is designed to avoid damaging shock-body threads if contact occurs.
  • One adapter and two stainless-steel washer sheets per kit.
  • The Swift stacked-spring adapter range offers 60 mm, 65 mm and 70 mm application sizes.
  • One kit: one self-lubricating adapter and two stainless-steel washer sheets; one kit per spring stack.

Application details and restrictions

Universal dimensional/component selection: 70 mm inner-diameter application (approximately 2.76 inches). Select by the metric spring and adapter interface. Swift’s U.S. nominal inch family label is not an exact metric conversion or a guarantee of clearance on a different nominal spring size. Confirm the damper and spring-seat dimensions before ordering. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.

Specifications

Brand Swift Springs
Manufacturer Part Number SP70
Product Family Stacked Spring Adapter Kit
Package One kit: one self-lubricating adapter and two stainless-steel washer sheets; one kit per spring stack
Inner-Diameter Application 70 mm / approximately 2.76 in
Included Adapter One
Included Stainless-Steel Washer Sheets Two
Kit Coverage One spring stack
Condition New
Materials Self-lubricating composite adapter and stainless-steel washer sheets

What's Included

One kit: one self-lubricating adapter and two stainless-steel washer sheets; one kit per spring stack. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.

Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration.

About Swift Springs

Swift develops springs and supporting components for motorsports and vehicle-specific suspension tuning. Its range includes main springs, helper springs, bump-spring systems, guides, adapters and protective accessories. Each family has distinct selection requirements. Use the complete part number, published dimensions, package contents and intended application to build a compatible arrangement. Results depend on the full chassis and damper setup.

Related Parts

    Stacked Spring Adapter Kits

    Swift stacked-spring and thrust-sheet size reference

    FAQ

    What is the SP70?

    A Swift stacked spring adapter kit specified for 70 mm inner-diameter application (approximately 2.76 inches).

    What is included?

    One kit: one self-lubricating adapter and two stainless-steel washer sheets; one kit per spring stack. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.

    Does Universal Fit establish vehicle fitment?

    Universal dimensional/component selection: 70 mm inner-diameter application (approximately 2.76 inches). Select by the metric spring and adapter interface. Swift’s U.S. nominal inch family label is not an exact metric conversion or a guarantee of clearance on a different nominal spring size. Confirm the damper and spring-seat dimensions before ordering. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.

    Which dimensions and interfaces should I check?

    Match the complete part number and published application dimensions to the actual spring, seat and damper arrangement. Confirm component generation, retention and the working range rather than assuming a shared brand name or nominal inch label establishes compatibility.

    Which family-specific design notes apply?

    Designed to stack compatible helper or assist springs with a main spring, including flat-wire and round-wire combinations. Allows spring unwinding during compression to reduce binding and noise. Lightweight adapter material is designed to avoid damaging shock-body threads if contact occurs. One adapter and two stainless-steel washer sheets per kit. The Swift stacked-spring adapter range offers 60 mm, 65 mm and 70 mm application sizes.

    Can this be installed without checking the rest of the suspension?

    The complete suspension arrangement determines compatibility and behavior. Inspect supporting parts, installed height, seating, engagement and travel. This part does not establish an alignment setting, fixed lowering amount or complete suspension conversion.

    Does the hero photo show this exact specification?

    Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration.

    What should be checked before use?

    Verify both springs, the adapter interface and the complete damper arrangement. Follow the spring and damper manufacturer’s assembly order. Check stack height, seating, full-droop retention, transition and all clearances through compression and rebound.

    Installation Instructions

    Verify both springs, the adapter interface and the complete damper arrangement. Follow the spring and damper manufacturer’s assembly order. Check stack height, seating, full-droop retention, transition and all clearances through compression and rebound.

    Swift SP70 Stacked Spring Adapter Kit - 70 mm inner-diameter application (approximately 2.76 inches)

    Swift Springs
    SP70
    Coilover Components
    Special order
    $ 35.00 $ 28.75
    $ 28.75

    Military & First Responders

    Military & First Responders

    A program for military members and first responders, with dedicated verification and support for your next build.

    Learn More & Apply

    Your cart

    ×