View vehicle applications
Fitment notes and restrictions
Description
Keep Debris Away from Your Spring and Shock Shaft
The Swift spring bag supports a correctly selected suspension setup. This SSB2550-180 configuration is specified for Tapered spring with 2.5-inch ID at one end and 5.0-inch OD at the other; Swift lists a 16–18-inch length range. Choose the complete configuration to match your spring, damper and intended use.
Key Features
- Protective sleeve covers the spring and exposed shock shaft.
- Helps shield suspension components from dust, dirt, mud and road or track debris.
- Application dimensions: Tapered spring with 2.5-inch ID at one end and 5.0-inch OD at the other; Swift lists a 16–18-inch length range.
- Designed around the corresponding Swift spring configuration.
- Swift describes protection against moisture or water as well as debris; the cover is not specified as a watertight seal.
- One Swift protective spring bag in the selected dimensional configuration.
Application details and restrictions
Universal dimensional/component selection: Tapered spring with 2.5-inch ID at one end and 5.0-inch OD at the other; Swift lists a 16–18-inch length range. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.
Specifications
| Brand | Swift Springs |
|---|---|
| Manufacturer Part Number | SSB2550-180 |
| Product Family | Spring Bag |
| Package | One Swift protective spring bag in the selected dimensional configuration |
| Spring Configuration | Tapered spring with 2.5-inch ID at one end and 5.0-inch OD at the other; Swift lists a 16–18-inch length range |
| Nominal Spring Length | 16–18 in |
| Condition | New |
What's Included
One Swift protective spring bag in the selected dimensional configuration. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.
Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration. Swift identifies the source photograph as a 1.88-inch ID spring-bag example; the listed dimensional configuration differs.
About Swift Springs
Swift develops springs and supporting components for motorsports and vehicle-specific suspension tuning. Its range includes main springs, helper springs, bump-spring systems, guides, adapters and protective accessories. Each family has distinct selection requirements. Use the complete part number, published dimensions, package contents and intended application to build a compatible arrangement. Results depend on the full chassis and damper setup.
Related Parts
FAQ
What is the SSB2550-180?A Swift spring bag specified for Tapered spring with 2.5-inch ID at one end and 5.0-inch OD at the other; Swift lists a 16–18-inch length range.
What is included?One Swift protective spring bag in the selected dimensional configuration. Springs, dampers, mounts, retainers, adapters and other supporting components are included only when explicitly listed in the kit contents above.
Does Universal Fit establish vehicle fitment?Universal dimensional/component selection: Tapered spring with 2.5-inch ID at one end and 5.0-inch OD at the other; Swift lists a 16–18-inch length range. Match the exact spring, seat, damper and supporting hardware before ordering. A Universal Fit designation does not mean compatibility with every vehicle, spring or shock from a named brand. Verify installed height, engagement, full-droop retention and clearance through the complete working travel range.
Which dimensions and interfaces should I check?Match the complete part number and published application dimensions to the actual spring, seat and damper arrangement. Confirm component generation, retention and the working range rather than assuming a shared brand name or nominal inch label establishes compatibility.
Which family-specific design notes apply?Protective sleeve covers the spring and exposed shock shaft. Helps shield suspension components from dust, dirt, mud and road or track debris. Application dimensions: Tapered spring with 2.5-inch ID at one end and 5.0-inch OD at the other; Swift lists a 16–18-inch length range. Designed around the corresponding Swift spring configuration. Swift describes protection against moisture or water as well as debris; the cover is not specified as a watertight seal.
Can this be installed without checking the rest of the suspension?The complete suspension arrangement determines compatibility and behavior. Inspect supporting parts, installed height, seating, engagement and travel. This part does not establish an alignment setting, fixed lowering amount or complete suspension conversion.
Does the hero photo show this exact specification?Representative product-family hero photo. Actual dimensions, bore, geometry and markings depend on the selected part number; use the specification table and complete part number to select the correct configuration. Swift identifies the source photograph as a 1.88-inch ID spring-bag example; the listed dimensional configuration differs.
What should be checked before use?Install around the corresponding spring and shock-shaft arrangement using the cover closure. Check that the cover cannot snag, rub through, restrict suspension travel or interfere with adjusters, reservoirs, spring seating or retention. Inspect and clean the cover regularly.
Installation Instructions
Install around the corresponding spring and shock-shaft arrangement using the cover closure. Check that the cover cannot snag, rub through, restrict suspension travel or interfere with adjusters, reservoirs, spring seating or retention. Inspect and clean the cover regularly.




