Synergy driver-side high steer steering knuckle in black E-coat
Click to zoom in
View vehicle applications

Description

Strengthen the driver steering corner with nodular iron

Synergy 8849-02L is the driver-side high steer steering knuckle for supported Jeep Wrangler JL/JLU and Gladiator JT applications. Its reinforced nodular-iron construction addresses bending, cracking, and taper wear associated with the factory aluminum design while supporting a flipped drag link and raised track-bar geometry.

Key Features

  • Nodular-iron construction engineered for up to 100 percent more strength than the factory aluminum knuckle
  • Additional material in critical areas helps resist bending, cracking, and taper wallowing
  • Raised drag-link position supports a corrected high-steer layout
  • Adjustable steering stops help maximize usable steering angle
  • Black E-coat finish provides abrasion and corrosion resistance
  • Compatible with OEM brake rotors, calipers, wheel bearings, and supported aftermarket axle shafts

Application details and restrictions

Years Make Model Position and Requirement
2018-current Jeep Wrangler JL / JLU Driver side; high steer drag-link location
2020-current Jeep Gladiator JT Driver side; high steer drag-link location

Synergy requires its drag link plus a bolt-on or weld-on track-bar relocation kit for this high-steer application. Synergy 8849-02L is for one driver-side knuckle only. Confirm axle, ball-joint, tie-rod, brake, wheel, tire, and steering clearance before installation.

Specifications

Detail Value
Manufacturer Part Number 8849-02L
Position Front driver side
Steering Configuration High-Steer drag-link location
Material Nodular iron
Finish Black E-coat
UPC 704674292340

What's Included

  • One driver-side Synergy 8849-02L steering knuckle
  • Opposite-side knuckle, ball joints, steering linkage, and relocation components are not included unless separately listed

About Synergy Manufacturing

Synergy Manufacturing develops heavy-duty steering and suspension components for Jeeps and trucks. Its JL/JT knuckle family separates driver and passenger sides and stock versus raised drag-link locations, so matching the exact part number is essential.

Related Parts

  • Use only Synergy steering, ball-joint, and track-bar components verified for the selected stock or high-steer configuration

FAQ

What is the 8849-02L?

It is Synergy's driver-side heavy-duty steering knuckle for supported Wrangler JL/JLU and Gladiator JT applications using the high steer drag-link position.

Which side does this knuckle fit?

It fits the driver side only. The opposite-side knuckle uses a different manufacturer part number.

Which steering position does it use?

This version uses the high steer drag-link location.

What is the knuckle made from?

Synergy specifies nodular iron with increased material in critical areas and a black E-coat finish.

Are ball joints included?

No. The listing includes one steering knuckle; ball joints and related steering parts are separate.

Does it fit both Wrangler and Gladiator?

Yes, for the supported 2018-current Wrangler JL/JLU and 2020-current Gladiator JT applications listed in the fitment table.

Is the installation bolt-on?

The knuckle is a bolt-on component, but the complete steering configuration must follow Synergy's current instructions and application requirements.

Should steering and alignment be checked afterward?

Yes. Verify fastener torque, brake and wheel clearance, steering travel, and alignment before returning the vehicle to service.

Installation Instructions

  1. Read the current Synergy instructions and confirm the vehicle, axle, driver-side position, and high steer steering configuration for 8849-02L.
  2. Secure the vehicle according to the service manual, remove the wheel and brake components, and support hoses and wiring.
  3. Disconnect the steering linkage, unit bearing, axle shaft, and ball-joint connections in the manufacturer-specified sequence.
  4. Install the required Synergy drag link and track-bar relocation components as directed for the high-steer layout.
  5. Reassemble with current factory and Synergy torque specifications.
  6. Verify hose and wiring routing, wheel and tire clearance, steering stops, full steering travel, fastener torque, and alignment before driving.

Synergy Driver High-Steer Steering Knuckle for Jeep Wrangler JL & Gladiator JT

Synergy Mfg
SYN8849-02L
704674292340
Steering Knuckles
5 Units In Stock
$ 400.00
$ 400.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×