View vehicle applications
Fitment notes and restrictions
Description
Carry the Aero Line Cleanly Along the Rockers
ADRO this component is the V2 wet carbon fiber side-skirt pair for the original, pre-Juniper Tesla Model Y body. ADRO lists 2020–2025 vehicles with an explicit Juniper exclusion; the model year alone is not enough to confirm a 2025 car. ADRO MPN A15A20-1402 identifies the exact configuration shown on this page.
Key Features
- Exact ADRO MPN A15A20-1402 for configuration matching
- ADRO this exact part V2 wet carbon fiber side-skirt pair
- Wet carbon fiber construction
- Original Model Y body application; Juniper excluded
- Left and right side skirts supplied as a pair
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2020–2024 | Tesla | Model Y | Original pre-Juniper body |
| 2025 | Tesla | Model Y | Only the original pre-Juniper body; confirm exact body style |
ADRO’s exact application is 2020–2025 Model Y excluding Juniper. Check the actual body configuration, especially a 2025 car. A Juniper vehicle is excluded even if its registration or model year overlaps the listed range.
Specifications
| Detail | Value |
|---|---|
| Brand | ADRO |
| Manufacturer Part Number | A15A20-1402 |
| Material | Wet carbon fiber |
| Condition | New |
| Fitment Type | Vehicle-specific |
What's Included
- One pair of side skirts, left and right (part of the ADRO this exact part package)
- 3M tape
- Screws
- Components packaged for ADRO MPN A15A20-1402
About ADRO
ADRO develops vehicle-specific aerodynamic and exterior components, including spoilers, splitters, diffusers, side skirts, body kits, trim, and carbon-fiber upgrades. Select every part by exact vehicle and exterior configuration.
Related Parts
- ADRO Pre-Juniper Tesla Model Y V1 Carbon Fiber Side Skirt Pair
- ADRO Pre-Juniper Tesla Model Y V2 Carbon Fiber Front Lip
- ADRO Pre-Juniper Tesla Model Y V2 Carbon Fiber Rear Diffuser
FAQ
What is the A15A20-1402?This is the V2 wet carbon fiber side-skirt pair package described above.
Which application is supported?ADRO’s exact application is 2020–2025 Model Y excluding Juniper. Check the actual body configuration, especially a 2025 car. A Juniper vehicle is excluded even if its registration or model year overlaps the listed range.
Does this fit Model Y Juniper?No. The current manufacturer application explicitly excludes Juniper. Match the original body configuration.
Does every 2025 Model Y qualify?No. Only an original pre-Juniper body within the manufacturer-listed application can qualify; verify the actual vehicle before ordering.
What is supplied?One pair of side skirts, left and right; 3M tape; Screws. Other components shown on an installed vehicle are separate unless listed here.
Will the finish match another part?Finish and visible material patterns can vary between separately produced parts. Exact visual matching is not guaranteed.
Should the part be test-fitted?Yes. Confirm alignment, mounting surfaces and clearance before fastening or using any manufacturer-specified adhesive.
How should the exterior finish be maintained?Use finish-safe wash products, avoid abrasive compounds unless approved, and inspect mounting points regularly.
Installation Instructions
- Confirm ADRO MPN A15A20-1402 and the complete vehicle configuration before disassembly or test fitting.
- Confirm the exact vehicle and the required companion components before test-fitting.
- Install using the specified mounting components and exact manufacturer procedure; do not substitute generic torque or adhesive-cure instructions.
- Check alignment, clearance and secure attachment before driving.
Translation missing: en.boa_product_preview.verified_vehicle_applications
| Translation missing: en.boa_product_preview.years | Translation missing: en.boa_product_preview.make | Translation missing: en.boa_product_preview.model | Translation missing: en.boa_product_preview.submodel |
|---|---|---|---|
| 2020-2024 | Tesla | Y | — |
Translation missing: en.boa_product_preview.fitment_notes_label - Year: 2020-2024
Make: Tesla
Model: Y




