View vehicle applications
Fitment notes and restrictions
Description
Control Sprinter rear sag without air-system maintenance
MBRSP25C2 is a rear Timbren SES kit for supported Mercedes-Benz Sprinter 2500 two-wheel-drive models and earlier four-wheel-drive models. Its Aeon hollow-rubber springs engage progressively as rear load increases, helping reduce squat, body roll, and corner sway without air lines or post-installation pressure checks.
Key Features
- MBRSP25C2 supports commercial and camper-van load control
- Progressive Aeon hollow-rubber spring design
- Preloaded configuration keeps the springs engaged for immediate support
- Reduces rear sag, body roll, and corner sway under load
- Zero post-installation maintenance
- 7,000-pound rated capacity without increasing the vehicle GVWR
- Rear standard-duty kit
- Lifetime limited warranty for qualifying defects in material and workmanship
Application details and restrictions
| Years | Make | Model | Required Drivetrain |
|---|---|---|---|
| 2007-2026 | Mercedes-Benz | Sprinter 2500 | Two-wheel drive |
| 2007-2018 | Mercedes-Benz | Sprinter 2500 | Four-wheel drive |
Do not use this kit for 2019-and-newer Sprinter 2500 four-wheel-drive or all-wheel-drive applications. Timbren lists a different kit for those vehicles. Added spring support does not increase the Mercedes-Benz GVWR, axle ratings, tire ratings, or legal payload.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | MBRSP25C2 |
| Product Type | Rear suspension enhancement system |
| Suspension Support Location | Rear |
| Kit Type | Standard |
| Spring Type | Aeon hollow rubber |
| Rated Capacity | 7,000 lb |
| UPC | 809933012032 |
| Warranty | Lifetime limited warranty |
What's Included
- Two frame mounts
- Two MBRSP25C2 Aeon SES hollow-rubber springs
- Four spacers
- Two axle brackets
- Application-specific mounting hardware
About Timbren
Timbren designs rubber-spring suspension support systems for towing, hauling, commercial, and recreational applications. SES kits use progressive Aeon springs to add load support without the plumbing and pressure maintenance required by air springs.
Related Parts
- No related product is linked because front kits and newer Sprinter drivetrain applications require their own verified Timbren part numbers.
FAQ
What is the MBRSP25C2?It is a rear Timbren SES suspension support kit for the listed Mercedes-Benz Sprinter 2500 drivetrain and model-year applications.
Does it fit a 2019 or newer four-wheel-drive Sprinter?No. Timbren limits this part to two-wheel-drive models for those years and lists a different kit for newer four-wheel-drive or all-wheel-drive vans.
Does it increase the Sprinter's GVWR?No. The vehicle must remain within every manufacturer weight and axle rating.
How does the progressive spring work?The hollow-rubber spring becomes firmer as load and compression increase, adding support when the rear suspension needs it.
Is air pressure maintenance required?No. The SES system has no air lines or pressure adjustments and requires no post-installation air-system maintenance.
Is the kit intended for camper vans?Yes. Timbren identifies it for both commercial and camper-van use when the exact drivetrain and model-year requirements are met.
What is the rated capacity?Timbren lists a 7,000-pound rated capacity, but that rating does not override the van's GVWR, axle, tire, or payload limits.
What warranty applies?Timbren states a lifetime limited warranty against qualifying defects in material and workmanship under normal use and service for the original vehicle installation.
Installation Instructions
- Confirm the model year, Sprinter 2500 drivetrain, rear mounting points, and MBRSP25C2 before opening the hardware packages.
- Read the current Timbren installation PDF and inventory both frame mounts, both Aeon springs, four spacers, both axle brackets, and all hardware.
- Park on a level surface, support the vehicle using approved lifting points, and unload the rear suspension as directed in the Timbren guide.
- Assemble the frame mounts, spacers, springs, and axle brackets only in the orientation shown for this exact kit.
- Tighten all fasteners to the values and sequence in the current Timbren instructions without exceeding the vehicle manufacturer's requirements.
- Lower the vehicle, verify spring engagement and component clearance through suspension travel, then recheck the installation after the initial loaded drive.




