Torque Solution Billet Engine Mount: Volkswagen Jetta/ Golf/ Passat/ R32

Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...

Engine block parts and internals for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, EcoBoost, K-Series, VR38DETT, and Cummins diesel builds are stocked at Black Ops Auto Works. Shop main and rod bearings, engine gaskets and gasket kits, engine mounts, block off plates, block heaters, PCV valves, sleeves, engine covers, and complete engines. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2,187 engine block SKUs across rotating assembly, sealing, mounting, and engine bay dress-up categories. What This Category Covers The Engine Block collection groups the internal and structural components that make up the bottom end and block assembly of a performance or OEM-replacement engine. Coverage spans bearings for rotating assembly refreshes, gaskets and gasket kits for sealing rebuilds, engine mounts for swap and performance builds, and engine bay dress-up pieces for HEMI, Hellcat, and ...

Engine mounts and motor mount kits for sport compacts, muscle cars, trucks, and Jeeps are stocked at Black Ops Auto Works. Shop polyurethane engine mounts, billet aluminum mounts, steel swap mounts, transmission mounts, motor mount inserts, and LS swap mount kits from Innovative Mounts, Kartboy, Prothane, Energy Suspension, UMI Performance, and Cobb. Every mount is filterable by year, make, model, trim, and engine family so the correct bushing durometer, bolt pattern, and mounting bracket ships the first time. Black Ops Auto Works carries 300 engine mount SKUs across Honda and Acura K-series and B-series platforms, Subaru WRX and STI, Jeep Wrangler, GM muscle car and LS swap chassis, and Ford EcoBoost and Fiesta and Focus ST platforms. What This Collection Covers Engine mounts are the isolating brackets that connect the engine block to the vehicle chassis, and their condition directly affects throttle response precision, driveline vibration, and accessory drive alignment under l...

Shop Torque Solution performance parts by exact manufacturer part number and verified application. The catalog includes billet engine and transmission mounts, shifter components, suspension hardware, turbo-system adapters, hoses, thermal products, tools, and related installation components.Torque Solution Products Engine, transmission, differential, and pitch-stop mounts Shifter bushings, short shifters, shift knobs, and drivetrain hardware Suspension, steering, brake, intake, exhaust, and turbo-system components Universal fittings, flanges, clamps, hoses, thermal products, and tools Choose Your PartMatch the complete manufacturer part number, vehicle year, make, model, transmission or engine requirement, dimensions, mounting interface, material, finish, and every current Torque Solution note. Universal components must be selected by exact size, thread, flange, hose, or fabrication requirement.About Torque SolutionTorque Solution develops application-specific and universal performan...

Shop Volkswagen exhaust and protection applications by exact model, generation and engine. Browse GTI, Golf R, Jetta or Tiguan for focused model guidance. Generation-Specific Exhaust Systems Mk7.5 GTI, Mk8 Golf R and Jetta 1.4T references have distinct applications. Match body, engine, drivetrain and current exhaust connections before choosing Touring or Track sound. A Track-to-Touring conversion needs the compatible starting system. It is different from a complete exhaust; review the exact sections, controls and hardware supplied. Cabin and Exterior Protection Atlas third-row and trunk liners protect different areas. Select rows, body contours and retention points for the actual cabin rather than extending another VW model’s coverage. Hood protectors require exact hood/fascia application. Match production and body before finish, and confirm every component’s manufacturer coverage even where VW/Audi platforms share architecture. Choose Your Part Identify exact model, generation, bo...

Shop Volkswagen GTI exhaust systems and conversion kits by Mk6, Mk7, Mk7.5 or Mk8 generation. Choose the sound configuration first, then the compatible tip finish and system contents. Touring or Track Exhaust Touring and Track offer different sound-control configurations. Compare cabin sound at cruising speed as well as acceleration, especially when the car already has an aftermarket downpipe. Match the engine, generation and rear bumper/outlet layout before ordering. A Mk7.5 system and a Mk8 system should not be selected solely because both carry GTI branding. Changing an Existing AWE System Track-to-Touring and Touring-to-Track kits change a compatible existing exhaust. Identify its manufacturer part number and the direction of the conversion. Check which sections and hardware are supplied and retained. A conversion kit is not a complete cat-back, and chrome or black tips do not determine chassis compatibility. Choose Your Part Identify GTI generation, engine and current downpipe...

Shop Volkswagen Jetta exhaust and cabin accessories by generation, body and engine. Keep GLI, 1.4T, 1.8T and 2.5-litre applications separate when comparing systems. Engine and GLI Exhaust Choices A Mk6 1.4T exhaust, a GLI 2.0T system and a 2.5-litre application have different requirements. Use the full manufacturer part number to confirm year, engine and body coverage. Compare Touring and Track sound configuration after establishing fit. For systems specifying an original downpipe, confirm the current exhaust connection before purchase. Conversion Kits and Cabin Coverage Touring-to-Track or Track-to-Touring sections require the matching starting exhaust. Check retained parts and conversion direction rather than treating the kit as a complete system. Floor liners need exact sedan or wagon coverage, cabin contours and retention points. A front-row set does not establish rear-row protection or fit in a different body. Choose Your Part Identify generation, sedan/wagon body and actual e...

Shop Volkswagen Passat engine-accessory, intake and cabin applications by production, engine and sedan or wagon body. Confirm the current powertrain and suspension equipment before selecting shared Volkswagen parts. Engine, Intake and Damper Interfaces A 2.5-litre intake and a Gen3 turbo inlet require different engine and air-path applications. Match sensors, hoses, turbo connection and mounting points. FSI six-bolt and TSI damper references require the correct engine/crank interface, accessory-drive alignment and installation hardware. Use the actual engine code when checking coverage. Mounts, Helper Springs and Liners A drivetrain stabilizer’s rubber or polyurethane configuration affects its intended setup. Confirm the exact mount location, application and supplied components. Helper springs need exact body and suspension coverage; wagon-specific support should not be extended to every sedan. Floor liners need matching cabin contours, retention points and row coverage. Choose Your...

Shop Volkswagen R32 engine-accessory and brake applications by generation and installed VR6 equipment. Verify the complete crank, pulley or brake-package configuration before choosing shared VW/Audi components. VR6 Damper Application A VR6 damper requires the exact engine, crank attachment and accessory-drive arrangement. Confirm pulley alignment and any required hardware with the manufacturer’s application and instructions. Golf, Passat and TT references may describe shared applications, but they do not establish fit for every R32 configuration or modified engine. Brake Packages and Suspension Protection Match pad profile, caliper, rotor diameter/thickness and axle for every brake-kit component. Select the friction compound for intended road or track conditions. Protective boots need the correct suspension position and dimensions. A non-quattro Audi reference should not be extended to R32 suspension without specific manufacturer coverage. Choose Your Part Identify generation, VR6 ...