View vehicle applications
Fitment notes and restrictions
Description
Add a Distinctive Rear Aero Profile
ADRO this component is the AT-R2 swan neck wing package for the 2020–2026 Toyota GR Supra. It combines a prepreg carbon fiber main deck with aluminum uprights and the listed trunk-mounting components. ADRO MPN A18A20-1501 identifies the exact configuration shown on this page.
Key Features
- Exact ADRO MPN A18A20-1501 for configuration matching
- ADRO this exact part AT-R2 swan neck wing
- Prepreg carbon fiber main deck
- Swan neck mounting arrangement with aluminum uprights
- Curved endplates and trunk bracket holders included
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2020–2026 | Toyota | GR Supra | AT-R2 standard upright wing package |
ADRO lists this exact part for 2020–2026 Toyota GR Supra, including 2.0, 3.0 and Final Edition applications where offered. AT-R2 standard upright wing package; confirm the actual installed combination.
Specifications
| Detail | Value |
|---|---|
| Brand | ADRO |
| Manufacturer Part Number | A18A20-1501 |
| Material | Prepreg carbon fiber and aluminum |
| Condition | New |
| Fitment Type | Vehicle-specific |
What's Included
- One main deck (part of the ADRO this exact part package)
- One pair of curved endplates, left and right
- One pair of trunk bracket holders, left and right
- One pair of aluminum uprights, left and right
- 3M tape
- Hardware
- Components packaged for ADRO MPN A18A20-1501
About ADRO
ADRO develops vehicle-specific aerodynamic and exterior components, including spoilers, splitters, diffusers, side skirts, body kits, trim, and carbon-fiber upgrades. Select every part by exact vehicle and exterior configuration.
Related Parts
- ADRO 2020–2026 Toyota GR Supra AT-R2 Complete Wing with Tall Uprights
- ADRO 2020–2026 Toyota GR Supra AT-R2 Tall Aluminum Upright Pair
- ADRO 2020–2026 Toyota GR Supra Carbon Fiber Front Lip for Stock Bumper
FAQ
What is the A18A20-1501?This is the AT-R2 swan neck wing package described above.
Which application is supported?ADRO lists this exact part for 2020–2026 Toyota GR Supra, including 2.0, 3.0 and Final Edition applications where offered. AT-R2 standard upright wing package; confirm the actual installed combination.
Is this the taller-upright version?This listing is the standard AT-R2 package. The complete taller-upright wing and the taller upright-only pair are separate products.
Is the published downforce claim a guarantee?No. ADRO describes a test result above 250 lb at 110 mph. That claim does not guarantee the same result on a different vehicle setup or in other operating conditions.
What is supplied?One main deck; One pair of curved endplates, left and right; One pair of trunk bracket holders, left and right; One pair of aluminum uprights, left and right; 3M tape; Hardware. Other components shown on an installed vehicle are separate unless listed here.
Will the finish match another part?Finish and visible material patterns can vary between separately produced parts. Exact visual matching is not guaranteed.
Should the part be test-fitted?Yes. Confirm alignment, mounting surfaces and clearance before fastening or using any manufacturer-specified adhesive.
How should the exterior finish be maintained?Use finish-safe wash products, avoid abrasive compounds unless approved, and inspect mounting points regularly.
Installation Instructions
- Confirm ADRO MPN A18A20-1501 and the complete vehicle configuration before disassembly or test fitting.
- Confirm the exact vehicle and the required companion components before test-fitting.
- Install using the specified mounting components and exact manufacturer procedure; do not substitute generic torque or adhesive-cure instructions.
- Check alignment, clearance and secure attachment before driving.




