-11%
UMI 4068 black sway-bar relocation brackets with Grade 8 hardware
Click to zoom in
View vehicle applications

Description

Create clearance for a larger idler arm or front sway bar

UMI Performance 4068 is a two-bracket front sway-bar relocation kit for the listed 1964-1977 GM A-Body applications. The black-anodized billet-aluminum adapters move the bushing mounts 0.745 inch forward and drop the bar 0.75 inch to address interference with oversized idler-arm pivots or larger-diameter sway bars.

Key Features

  • Moves the front sway-bar bushing mounts 0.745 inch forward
  • Drops the sway bar 0.75 inch to improve component clearance
  • CNC-machined from 0.75-inch-thick 6061 billet aluminum
  • Black-anodized finish
  • Slotted holes fit 2-9/16-inch and 2.75-inch chassis-hole spacing
  • Grade 8 hardware for 5/16-18 and 3/8-16 threaded applications
  • Direct bolt-on installation without frame drilling
  • Designed and manufactured in the USA

Fitment

Make Models and Years Required Configuration
Buick Century 1973-1977; Gran Sport 1965-1967; GS 1970-1972; GS 350 and GS 400 1968-1969; GS 455 1970-1972; Regal 1973-1977; Skylark 1964-1972; Special 1964-1969; Sportwagon 1964-1972 Factory GM A-Body sway-bar mounting locations
Chevrolet Chevelle and El Camino 1964-1977; Laguna 1973-1976; Malibu 1964-1967 and 1973-1977; Monte Carlo 1970-1977 Factory GM A-Body sway-bar mounting locations
Oldsmobile 442 1964-1971; Cutlass and F85 1964-1977; Vista Cruiser 1964-1972 Factory GM A-Body sway-bar mounting locations
Pontiac Grand Am 1973-1977; Grand Prix 1969-1972; GTO 1964-1977; Tempest 1964-1970; LeMans 1964-1977 Factory GM A-Body sway-bar mounting locations
GMC Sprint 1971-1972 Factory GM A-Body sway-bar mounting locations

UMI 4068 does not create tire clearance and is not intended for a custom chassis without the original factory sway-bar mounting holes. Confirm the frame threads and either 2-9/16-inch or 2.75-inch hole spacing before installation.

Specifications

Detail Value
Manufacturer Part Number 4068
Product Type Front sway-bar relocation bracket set
Material 6061 billet aluminum
Bracket Thickness 0.75 inch
Forward Relocation 0.745 inch
Vertical Drop 0.75 inch
Hole Spacing 2-9/16 inches or 2.75 inches center to center
Hardware Threads 5/16-18 and 3/8-16
Finish Black anodized
Installation Time Approximately 0.5 to 1 hour
Country of Origin USA

What's Included

  • Two UMI 4068F relocation adapter mounts supplied as the UMI 4068 kit
  • Two 3/8-16 x 1-1/4-inch Grade 8 bolts
  • Two 3/8-16 x 1-1/2-inch Grade 8 bolts
  • Two 3/8-16 x 1-inch Grade 8 bolts
  • Six 3/8-inch AN flat washers, 0.060 inch thick
  • Two 5/16-18 x 1-1/4-inch Grade 8 bolts
  • Two 5/16-18 x 1-1/2-inch Grade 8 bolts
  • Four 5/16-inch Grade 8 flat washers

About UMI Performance

UMI Performance designs and manufactures suspension and chassis components in Pennsylvania for classic and modern performance applications. This relocation kit is machined for the original GM A-Body mounting architecture and supplies both common frame-thread sizes used across the supported range.

Related Parts

  • No related product is linked because sway-bar diameter, bushing-clamp dimensions, idler-arm shape, and frame mounting must be matched to the complete vehicle configuration.

FAQ

What is the 4068?

It is a pair of billet-aluminum adapters with Grade 8 hardware that repositions the front sway-bar bushing mounts on supported GM A-Body vehicles.

How far does the kit move the sway bar?

It moves the mounts 0.745 inch forward and drops the bar 0.75 inch.

Does this kit add tire clearance?

No. It addresses clearance between the sway bar and steering or idler-arm components, not the tire.

Is drilling required?

No. The adapters use the original frame mounting holes when the supported factory configuration is present.

Which frame-hole spacing is supported?

The slotted brackets accommodate 2-9/16-inch and 2.75-inch center-to-center spacing.

What frame threads are supported?

The package supplies Grade 8 hardware for both 5/16-18 and 3/8-16 threaded applications.

Can this be installed on a custom chassis?

Not unless the chassis has the verified factory-style mounting locations, spacing, and threads. The manufacturer excludes custom frames without the original holes.

What torque values are specified?

UMI lists 18-20 ft-lb for 5/16-inch hardware and 30-35 ft-lb for 3/8-inch hardware.

Installation Instructions

  1. Confirm the vehicle application, factory sway-bar mounting holes, frame threads, hole spacing, and UMI 4068 package before beginning.
  2. Raise and support the vehicle safely, then loosen the end links as needed to remove preload from the front sway bar.
  3. Support the bar, remove the original bushing-clamp fasteners, and clean the frame mounting surfaces and threads.
  4. Select the supplied 5/16-18 or 3/8-16 hardware that matches the verified frame threads; do not force or cross-thread a fastener.
  5. Bolt the relocation adapters to the factory frame holes, then attach the sway-bar bushing clamps to the new locations.
  6. Torque 5/16-inch hardware to 18-20 ft-lb or 3/8-inch hardware to 30-35 ft-lb as applicable.
  7. Reconnect and tighten the end links at the appropriate suspension position, then verify clearance through steering and suspension travel.
  8. Recheck fastener torque and inspect for contact after the initial drive.

UMI Front Sway Bar Relocation Bracket for 1964-1977 GM A-Body

UMI4068
4068
Sway Bar Brackets
7 Units In Stock
$ 44.99 $ 39.99
$ 39.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×