-5%
UMI 2216AS-R red tunnel torque-arm mount angled view
UMI 2216AS-R red tunnel torque-arm mount front view
UMI 2216AS-R polyurethane bushing and double-shear mount detail
UMI 2216AS-R red powder-coated center section detail
Click to zoom in
View vehicle applications

Description

Support a tunnel-mounted torque arm without loading the transmission tailshaft

UMI Performance 2216AS-R is the red powder-coated bolt-in front mount for UMI's tunnel-mounted torque-arm system on supported third-generation GM F-Body cars. It is made for 700R4 automatic and T5 manual transmissions and is useful when completing a transmission swap with the compatible UMI torque arm already installed.

Key Features

  • UMI Performance 2216AS-R is matched to the verified application and configuration
  • Bolt-in mount for the compatible UMI tunnel-mounted torque-arm system
  • Supports 700R4 automatic and T5 five-speed manual transmission configurations
  • Moves torque-arm support away from the transmission tailshaft
  • Mild-steel construction with red powder-coat finish
  • Polyurethane bushing mount
  • Double-shear tabs accept an optional compatible driveshaft loop
  • Uses existing mounting locations without drilling or welding when the supported factory floorpan is present
  • Designed and manufactured in the USA

Fitment

Years Make Model Required Configuration
1982-1992 Chevrolet Camaro Third-generation F-Body with 700R4 automatic or T5 manual transmission and compatible UMI tunnel-mounted torque arm
1982-1992 Pontiac Firebird Third-generation F-Body with 700R4 automatic or T5 manual transmission and compatible UMI tunnel-mounted torque arm

Specifications

Detail Value
Manufacturer Part Number 2216AS-R
Product Type Tunnel-mounted torque-arm front mount
Supported Transmissions 700R4 automatic and T5 five-speed manual
Material Mild steel
Finish Red powder coat
Installation Direct bolt-on with supported factory mounting locations
Bushing Polyurethane
Unit of Measure Each
Country of Manufacture USA

What's Included

  • One exact UMI Performance 2216AS-R tunnel-mounted torque-arm front mount in red powder coat
  • Polyurethane bushing assembly
  • Manufacturer-supplied installation hardware
  • Torque arm and optional driveshaft safety loop are not included

About UMI Performance

UMI Performance designs and manufactures suspension and chassis components in Philipsburg, Pennsylvania. Its GM F-Body torque-arm parts are configuration-specific, so transmission type, companion torque arm, mounting locations, and optional loop requirements must be confirmed before installation.

Related Parts

  • Use only the UMI tunnel-mounted torque arm and optional driveshaft-loop components specifically documented for this mount, transmission, and vehicle; no unverified internal product link is included.

FAQ

What is the 2216AS-R?

It is torque arm mount for supported 1982-1992 Camaro and Firebird applications with a 700R4 or T5 transmission and compatible UMI tunnel-mounted torque arm.

What application must be confirmed before ordering?

Confirm the 1982-1992 GM F-Body application, 700R4 or T5 transmission, compatible UMI tunnel-mounted torque arm, factory mounting points, and whether an optional driveshaft loop is required.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect the transmission mount, floorpan mounting points, torque-arm bushings, driveshaft clearance, exhaust clearance, and surrounding wiring or lines before installation.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm UMI Performance 2216AS-R, the application, and every listed restriction before installation.
  2. Raise and support the vehicle safely, support the transmission and torque-arm assembly, and inspect all mounting points before loosening hardware.
  3. Remove the existing front torque-arm mount or incompatible crossmember components according to current UMI and vehicle service information.
  4. Position the UMI mount at the supported factory floorpan locations and start all supplied fasteners by hand without drilling, cutting, or welding.
  5. Install the polyurethane bushing connection and attach the compatible tunnel-mounted torque arm without preload.
  6. Verify driveshaft, transmission, exhaust, floorpan, brake-line, fuel-line, and wiring clearance through the available suspension and driveline movement.
  7. Torque all fasteners using current UMI instructions, road-test carefully, and recheck hardware and bushing position after the initial drive.

California Proposition 65 Warning: Cancer and reproductive harm. Visit www.P65Warnings.ca.gov for more information.

UMI Tunnel-Mounted Torque Arm Mount for 1982-1992 GM F-Body - Red

UMI2216AS-R
2216AS-R
Suspension Arms & Components
15 Units In Stock
$ 159.99 $ 150.68
$ 150.68

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×