Click to zoom in
2006-2010 Chevrolet HHR Vertical Door Kit – Special Order is the exact Vertical Doors vehicle-specific conversion kit shown in this listing. It retains the original vehicle doors and changes the hinge movement so the converted doors open outward first and then raise vertically. Confirm part number VDCCHEVYHHR06UP, the complete application, body configuration, and current manufacturer notes before ordering.
Key Features
- Vertical Doors, Inc. builds the VDCCHEVYHHR06-UP as a direct bolt-on assembly that mounts to the vehicle's factory bolt pattern, and the vehicle keeps its original doors and outer skins.
- The kit swaps the factory door hinges for hardened steel vertical hinges and gas shocks so the doors open outward and then lift vertically.
- Vertical Doors, Inc. builds this as a direct bolt-on kit that mounts to the factory bolt pattern, and the company specifically cautions that weld-on kits can damage a vehicle.
- Outward travel before the lift is specific to this application, and Vertical Doors, Inc. does not publish a single figure that covers every vehicle.
- The company machines its hinges from domestic hardened steel, holds United States patents on its designs, and prototypes each kit on the actual vehicle so the hardware lines up with the factory bolt pattern.
- No separate shock purchase is needed.
Fitment
| Years | Make | Model |
|---|---|---|
| 2006-2010 | Chevrolet | HHR |
Specifications
| Brand | Vertical Doors, Inc. |
|---|---|
| Manufacturer Part Number | VDCCHEVYHHR06UP |
| Product Type | Vertical Door Conversion Kit |
| Vehicle Application | 2006-2010 Chevrolet HHR |
| Converted Doors | Front Doors |
| Original Doors Retained | Yes |
| Primary Material | Steel |
| Condition | New |
| Manufacturer Catalog Status | Verified current |
What's Included
Two application-specific hinge assemblies, two gas shocks, required mounting hardware, and manufacturer installation instructions are included unless the manufacturer listing for VDCCHEVYHHR06UP expressly states otherwise.
About Vertical Doors
Vertical Doors, Inc. engineers vehicle-specific vertical door conversion systems in the United States. Its application-specific kits retain the original doors and use dedicated hinge geometry instead of a universal weld-on assembly.
Related Vertical Doors Products
- Shop all Vertical Doors products
- Vertical Doors Chevrolet Avalanche 2003-2006
- Vertical Doors Chevrolet Avalanche 2007-2010
- Vertical Doors Chevrolet Blazer 1995-2005
Frequently Asked Questions
Will VDCCHEVYHHR06UP fit my vehicle?
Use the fitment table and match the exact year, make, model, body configuration, and manufacturer part number. Contact us before ordering if any application detail differs.
Does VDCCHEVYHHR06UP replace the original doors?
No. The kit changes the hinge system for the front doors and retains the vehicle's original doors.
Should VDCCHEVYHHR06UP be professionally installed?
Professional installation by a shop experienced with door alignment and body hardware is recommended. Final panel gaps, latch operation, wiring clearance, shock support, and fastener torque must be verified before driving.
Manufacturer Installation and Order Notes
- The manufacturer lists this as a discontinued application. Confirm availability before ordering. Discontinued kits are non-refundable and non-exchangeable.
Shipping to Canada, Alaska, and Hawaii
Canada, Alaska, and Hawaii require an additional $70 shipping charge. Contact Black Ops Auto Works before ordering to confirm the destination and final shipping total.
Installation
Follow the current Vertical Doors instructions for VDCCHEVYHHR06UP and the vehicle manufacturer's service procedure. Support each door before removing hinge hardware, protect and route wiring without tension, align the door and latch before final torque, verify gas-shock support and full clearance through the complete travel, then recheck alignment and fasteners after initial use.
Chevrolet HHR Parts and Accessories
Explore Chevrolet HHR parts with engine, accelerator connector and body equipment identified. Window accessories, electronic controls and circuit extensions have separate mounting or interface requirements. Window Coverage and Installation In-channel deflectors need exact door and glass coverage. Review the supplied pieces, seating method and manufacturer window-operation instructions. Body and trim configuration matters for accessories that attach near glass or door frames. Confirm the intended HHR body application rather than choosing from finish alone. Electrical Interfaces and Service Scope Pedal-response kits require the actual connector family and explicit vehicle application. Compare phone or display equipment and kit contents separately. Electrical extensions need matching circuit, connector, routing and engine coverage. A Camaro oxygen-sensor extension title or matching length does not establish an HHR application. Choose Your Part Identify production, engine and body equi...
View Chevrolet HHR Parts and Accessories Products
Doors
Doors and door components for muscle cars, Jeeps, trucks, and exotics are stocked at Black Ops Auto Works. Shop vertical doors kits, replacement steel door shells, carbon fiber doors, Jeep Wrangler tube doors and half doors, door sills, door straps, mirror filler plates, and door trim for Dodge Charger and Challenger, Chrysler 300, Ford Mustang and Ranger, Ram 1500 TRX, Jeep Wrangler JK and JL, and exotic platforms. Every door part is filterable by year, make, model, trim, and body style so the correct fitment ships the first time. Black Ops Auto Works carries 500 door SKUs across vertical door kits, replacement panels, tube doors, and door trim categories. What This Category Covers Doors and door components are a core structural and styling upgrade for restorations, custom builds, and vehicles that have suffered door damage from accidents, rust, or hard off-road use. Buyers who shop this category include restoration builders replacing rust-compromised originals on classic Mopar...
View Doors Products
Vertical Doors
Shop vehicle-specific Vertical Doors conversion kits and Lambo-style door hinges for cars, trucks, SUVs, classics, and exotic vehicles at Black Ops Auto Works. Find application-matched systems for Dodge Charger and Challenger, Chrysler 300, Chevrolet Corvette and Camaro, Ford Mustang, Toyota Supra and GR86, Nissan Z platforms, Honda Civic, Subaru BRZ, Tesla Model 3, trucks, luxury vehicles, and many more. Vertical Doors, Inc. designs hinge systems around specific model years, body styles, and factory mounting locations. Use the vehicle filters and each product listing to confirm the exact application before ordering. A kit made for one generation, coupe, sedan, convertible, or rear-door position will not automatically fit another configuration. Vertical Door Conversion Kits for Cars and Trucks A traditional Vertical Doors kit changes the factory door motion from a conventional outward swing to an outward-then-upward movement. The original door, glass, latch, and most factory acces...
View Vertical Doors Products