Fuel Injector Connection WALF90000274 fuel injector
Click to zoom in
View vehicle applications

Description

Build the fuel system around the correct flow and connection

Fuel Injector Connection WALF90000274 supports the stated flow, fuel, electrical, and physical configuration. Walbro 450 LPH High Pressure Relief Valve In-Tank E85 High Pressure Fuel Pump (F90000274)

Features

  • Outperforms all current market in-tank fuel pumps
  • Designed for engines with more than 500HP
  • Award-winning OE Technology
  • The conservative horsepower rating of this pump is that this pump can support 800 HP on 12 volts and
  • up to 950 HP on 13.5 volts.......
  • IMPORTANT**
  • You cannot wire an aftermarket pump directly to the factory trigger wires. The factory wires will only allow a 12 amp draw pump which most OEM pumps are. A high performance pump draws
  • 13.6

Fitment & Requirements

Scope Requirement
Component-specific application Component-specific application. Match the exact fuel injector, manufacturer part number, dimensions, connector, and fuel-system requirements before ordering.

Part Numbers & Options

Option Manufacturer Part Number
Default WALF90000274

Specifications

Detail Value
Product Type Fuel Injector
Fuel Compatibility Walbro 450 LPH High Pressure Relief Valve In-Tank E85 High Pressure Fuel Pump (F90000274)
Flow Rating High- Pressure,High-flow performance
Fuel Compatibility 2 OEM technology designed and developed for E85. All pumping components have been validated to
Fuel Compatibility 3 OEM Specifications for approved use in E85/Flex fuel applications.
Package Detail amps. Therefore, you need to install a fuel pump relay at least 30 amps with a 10 gauge feed directly from the battery (fused of course) and use the factory power for the original fuel pump to trigger the relay.

What's Included

  • The exact selected product or set shown in the Part Numbers & Options table
  • amps. Therefore, you need to install a fuel pump relay at least 30 amps with a 10 gauge feed directly from the battery (fused of course) and use the factory power for the original fuel pump to trigger the relay.
  • Unlisted injectors, rails, wiring, fittings, tuning, tools, and installation hardware are not included

About Fuel Injector Connection

Fuel Injector Connection supplies flow-matched fuel injectors, connection components, service parts, and supporting fuel-system hardware. Correct selection depends on the exact flow, electrical, dimensional, spray-pattern, quantity, and engine requirements rather than a similar-looking injector alone.

Related Parts

  • No external product is linked. Verify any injector adapters, rails, seals, pumps, or tuning components against an ACTIVE Black Ops Auto Works listing for the exact application before purchase.

FAQ

What is the WALF90000274?

It is the exact fuel injector and configuration described in the fitment and specification sections above.

Is this selected by vehicle model alone?

No. Confirm every stated engine, connector, rail, length, flow, and package requirement that applies to this exact item.

Is tuning required?

Fuel-system and injector changes can require calibration. Use qualified tuning guidance for the exact engine, fuel, injector data, and operating pressure.

Does the listing include every surrounding fuel-system part?

No. Only the components stated in the What's Included section are included.

Can a related part number be substituted?

No. A different flow rate, length, connector, spray pattern, quantity, or adapter package is a different configuration.

Which fuel can be used?

Use only the fuels explicitly listed in the specifications and current manufacturer data for this exact configuration.

What should be checked before installation?

Verify the part label, seals, connector, rail fit, quantity, fuel compatibility, and calibration requirements before opening the fuel system.

Who should install fuel-system components?

A qualified technician should depressurize the system, follow the vehicle service procedure, prevent contamination, and leak-check the completed installation.

Installation Instructions

  1. Confirm the Fuel Injector Connection part label and every fitment, connector, dimension, flow, quantity, and fuel requirement before installation.
  2. Review the vehicle, engine, or component service procedure and disconnect electrical power where required.
  3. Relieve fuel-system pressure safely and work in a ventilated area away from sparks, flame, and hot surfaces.
  4. Keep all ports and components clean, replace only the seals specified for the exact application, and do not force mismatched connectors or fittings.
  5. Install the component in the documented orientation and tighten fasteners or fittings to the applicable current specification.
  6. Restore pressure, inspect every disturbed connection for leaks, confirm normal operation, and complete any required calibration before road use.

Fuel Injector Connection Walbro 450 LPH E85

WALF90000274
Fuel Injectors
Same Day or Next Business Day
$ 130.00
$ 130.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×