View vehicle applications
Fitment notes and restrictions
Description
Hold predictable race braking as rotor temperature rises
Wilwood 150-30-7812K is a four-pad axle set using the BP-30 high-temperature racing compound and the 7812 pad plate. It provides high friction, predictable linear response, strong fade resistance, and low wear during sustained heat for compatible DynaPro-based race brake systems.
Key Features
- BP-30 high-temperature racing compound
- High friction with medium initial response that increases with rotor temperature
- Predictable linear response with strong modulation
- Low wear rate during sustained high-heat braking
- Very high resistance to heat fade
- Designed for iron or steel rotors
Fitment
| Compatibility Basis | Verified Requirement |
|---|---|
| Pad plate | Wilwood 7812 |
| Compatible brake system | Wilwood calipers that explicitly specify the 7812 pad plate, including supported DynaPro families |
| Required pad thickness | 0.49 in |
| Use restriction | Racing only; not for street use |
| Vehicle mapping | No broad year-make-model mapping; select by exact caliper and pad plate |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 150-30-7812K |
| Compound | BP-30 |
| Pad Plate | 7812 |
| Pad Thickness | 0.49 in |
| Pad Area | 6.36 sq in |
| Pad Volume | 2.1 cu in |
| Bedded | No |
| Quantity | Four pads / one axle set |
| UPC | 889545118889 |
What's Included
- Four BP-30 racing brake pads forming one axle set
- Calipers, rotors, retaining hardware, wear sensors, and installation tools are not included
About Wilwood
Wilwood engineers braking systems, calipers, rotors, and friction compounds for street, performance, restoration, and competition applications. Its pad families are identified by exact plate shape, compound, thickness, and intended temperature range.
Related Parts
- Wilwood calipers that explicitly specify the matching pad plate shown in the fitment table
- Compatible rotors, pad retainers, and service hardware selected for the exact caliper system
FAQ
What is the 150-30-7812K?It is a four-pad Wilwood BP-30 racing axle set using the 7812 pad plate and .49-inch thickness.
Is this selected by vehicle year, make, and model?No. Select it by the exact Wilwood caliper, 7812 pad plate, pad thickness, and race brake-system requirements.
Which calipers use this pad shape?Wilwood lists compatible DynaPro caliper families among the systems using the 7812 plate.
Is BP-30 intended for street use?No. Wilwood identifies this compound as racing only and not for street use.
Which rotor materials are supported?Wilwood specifies iron or steel rotors for the BP-30 compound.
Are these pads pre-bedded?No. Wilwood identifies the set as not bedded, so use the current race bedding procedure after installation.
What is included in the package?The package contains four pads for one axle set. Calipers, rotors, and unrelated hardware are not included.
What must be checked before ordering?Confirm the caliper part number, 7812 plate shape, .49-inch thickness, rotor material, intended racing temperature range, and retaining hardware.
Installation Instructions
- Confirm the caliper part number, 7812 pad plate, .49-inch thickness, iron or steel rotor, and required hardware.
- Support the vehicle safely and follow the current Wilwood race-caliper service instructions.
- Inspect rotor thickness and condition, caliper seals, pad retainers, and all mounting hardware before installing the new set.
- Install all four pads in the correct axle positions and torque every fastener to the current Wilwood specification.
- Restore pedal pressure, verify free rotation and leak-free operation, then complete Wilwood's current race bedding procedure before track use.
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.




