View vehicle applications
Fitment notes and restrictions
Description
Manage heat with a directional drilled-and-slotted rotor
Wilwood 160-16512-BK combines a directional 48-vane iron rotor with an integral black electro-coated hat. Its SRP drill-and-slot pattern is intended to support consistent pad contact and gas evacuation in a correctly matched high-performance brake system.
Key Features
- Right-hand directional rotor-and-hat assembly
- SRP drilled-and-slotted friction surface
- 48 directional cooling vanes
- Dynamic balancing performed by Wilwood
- Black electro-coat protects non-friction surfaces
- 13.38-inch diameter and 1.25-inch width
Application details and restrictions
| Application | Required Dimensions | Position | Restrictions |
|---|---|---|---|
| Universal, dimension-based brake system component | 13.38 x 1.25 inches; 6 x 5.50-inch bolt circle; 0.680-inch offset | Right-hand | Confirm the complete Wilwood brake system, caliper, pad, wheel, and hub clearances before ordering |
This rotor is not assigned to a year-make-model application by Wilwood. It must be selected by exact dimensions and brake-system configuration. The matching left-hand component is sold separately.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 160-16512-BK |
| Product Type | SRP drilled-and-slotted rotor and hat |
| Material | Iron |
| Finish | Black electro-coat |
| Outside Diameter | 13.38 inches |
| Rotor Width | 1.25 inches |
| Vanes | 48 directional |
| Wheel Bolt Circle | 6 x 5.50 inches |
| Stud Diameter | 0.63 inch |
| Lug Inside Diameter | 3.09 inches |
| Far-Side Inside Diameter | 9.28 inches |
| Offset | 0.680 inch |
| Clearance Inside Diameter | 7.30 inches |
| Face Thickness | 0.38 inch |
| Weight | 25.92 lb |
| Burnished | No |
| UPC | 889545101720 |
What's Included
- One right-hand SRP drilled-and-slotted rotor-and-hat assembly
- Left-hand rotor, caliper, pads, mounting brackets, and installation hardware are not included
About Wilwood
Wilwood Engineering develops performance brake systems and individual brake components for street, competition, off-road, and specialty applications. Its directional rotor designs must be installed on the specified side and matched to the dimensions of the complete brake package.
Related Parts
- Use the matching left-hand rotor and only calipers, pads, brackets, hubs, and hardware verified for the exact Wilwood brake system.
- No related store product is linked because compatibility depends on the complete brake package and dimensional requirements.
FAQ
What is the 160-16512-BK?It is a right-hand SRP drilled-and-slotted iron rotor with an integral black electro-coated hat.
Is this rotor vehicle-specific?No. Wilwood identifies it by dimensions and brake-system configuration rather than a year-make-model application.
Which side does it fit?It is the right-hand directional rotor. A different component is required for the left-hand side.
What are the rotor dimensions?The outside diameter is 13.38 inches and the rotor width is 1.25 inches.
What wheel bolt circle does it use?The integral hat uses a 6 x 5.50-inch wheel bolt circle.
Is the rotor burnished?No. Wilwood lists this rotor as not burnished, so follow the current pad and rotor bedding procedure for the complete brake system.
Does the black coating cover the friction surface?The black electro-coat protects the assembly during storage and handling. Prepare and bed the friction surface according to Wilwood's current instructions.
What must be checked before ordering?Confirm diameter, width, offset, bolt circle, hub dimensions, caliper and pad compatibility, wheel clearance, and the required right-hand orientation.
Installation Instructions
- Confirm the exact brake-system configuration, all listed dimensions, and the required right-hand orientation before installation.
- Have a qualified brake technician inspect the hub, bearings, caliper, pads, brackets, fasteners, and mating surfaces for serviceability.
- Clean the mating surfaces and prepare the rotor friction faces according to Wilwood's current instructions without removing protective coating from unrelated surfaces.
- Install the rotor using the exact hardware, torque values, and sequence specified for the complete Wilwood brake package and vehicle hub.
- Verify lateral runout, caliper centering, pad sweep, wheel clearance, hose clearance, and unrestricted rotation before driving.
- Bed the pads and rotor using the current procedure for the installed pad compound, then inspect the system for leaks, abnormal contact, and fastener security.
