-10%
XClutch XKNI25525-1C Stage 2 clutch kit with flywheel and hardware
Click to zoom in
View vehicle applications

Description

Hold added VQ35DE torque while keeping a cushioned, sprung street disc

XClutch XKNI25525-1C combines a cushioned ceramic friction disc with a sprung hub to improve modulation compared with a rigid ceramic design. The complete Stage 2 package adds a single-mass chromoly flywheel and application-specific release components for supported VQ35DE manual-transmission cars.

Key Features

  • Exact XClutch XKNI25525-1C Stage 2 cushioned ceramic configuration
  • Published torque capacity of 690 lb-ft including the manufacturer's factor of safety
  • 26 percent increase in clamping force
  • Cushioned ceramic friction segments with a sprung hub
  • Single-mass chromoly flywheel included
  • Designed for performance street use requiring increased heat capacity
  • Single-mass flywheel conversion may increase audible drivetrain noise and vibration

Application Details and Restrictions

Years Make Model Verified Application and Notes
2003-2006 Nissan 350Z 3.5L VQ35DE; manual transmission; 1in x 24-spline input
2003-2006 Infiniti G35 3.5L VQ35DE; manual transmission; 1in x 24-spline input
Excluded Nissan / Infiniti VQ35HR applications Different engine and clutch application; not listed by XClutch

Specifications

Detail Value
Manufacturer Part Number XKNI25525-1C
Stage Stage 2
Recommended Use Performance street use requiring high heat capacity
Published Torque Capacity 690 lb-ft including factor of safety
Clamping Force Increase 26 percent
Disc Diameter 9 13/16 inches
Disc Material Ceramic
Disc Hub Sprung and cushioned
Input Shaft 1 inch; 24 splines
Flywheel Single-mass chromoly; included
UPC 9337467254679

What's Included

  • One XClutch XKNI25525-1C pressure plate and cushioned ceramic clutch disc
  • One single-mass chromoly flywheel
  • One release bearing and one pilot bearing
  • Flywheel bolts and pressure-plate bolts
  • One clutch-alignment tool
  • Clutch fork, pivot ball, hydraulic components, rear main seal, and installation labor are not included

About XClutch

XClutch is developed by Australian Clutch Services using in-house testing for street and motorsport applications. Its cushioned ceramic kits combine a high-heat friction material with hub and segment damping intended to retain more progressive engagement than a rigid ceramic racing disc.

Related Parts

  • Application-correct clutch fork, pivot ball, and hydraulics should be inspected before installation
  • Rear main seal and transmission input seal should be serviced only when inspection shows replacement is required
  • Use the current XClutch technical bulletin and vehicle service information for installation and break-in

FAQ

What is the XKNI25525-1C?

It is the Stage 2 cushioned ceramic clutch package with a single-mass flywheel for the verified VQ35DE Nissan 350Z and Infiniti G35 applications.

Does this fit a VQ35HR engine?

No. The manufacturer application data covers the VQ35DE configuration and does not list the later VQ35HR clutch application.

How much torque is it rated to hold?

XClutch publishes a 690 lb-ft capacity including its factor of safety; actual service life still depends on vehicle setup, use, and installation.

Is the flywheel included?

Yes. The package includes the specified single-mass chromoly flywheel and its listed mounting bolts.

Will the single-mass flywheel change noise or vibration?

It can. XClutch states that single-mass conversions may increase drivetrain noise, vibration, or harshness, which is a normal characteristic and not a warranty defect.

Is this intended for daily street use?

The manufacturer recommends it for performance street use requiring high heat capacity, but the ceramic friction material will engage more aggressively than an original-equipment organic disc.

What should be inspected during installation?

Inspect the clutch fork, pivot ball, guide surfaces, hydraulics, seals, transmission input shaft, and flywheel mounting area before fitting the new components.

Is professional installation recommended?

Yes. Correct transmission removal, flywheel installation, clutch alignment, torque procedure, hydraulic service, and break-in are important to operation and warranty eligibility.

Installation Instructions

  1. Confirm the package identifies XClutch XKNI25525-1C, then verify a 2003-2006 350Z or G35 with the VQ35DE engine, manual transmission, and 1-inch 24-spline input shaft.
  2. Disconnect battery power, support the vehicle and transmission safely, and remove the transmission using the current Nissan or Infiniti service procedure.
  3. Inspect the rear main seal, transmission input seal, clutch fork, pivot ball, guide surfaces, hydraulics, and transmission input shaft; replace worn supporting parts before assembly.
  4. Remove the original clutch and flywheel, inspect the crankshaft mounting surface, and clean all new friction surfaces with an approved residue-free cleaner.
  5. Install the supplied flywheel and bolts, then align the cushioned ceramic disc and pressure plate in the correct orientation using the supplied tool.
  6. Tighten all fasteners gradually and evenly to the current XClutch and vehicle specifications; do not use an impact tool for final torque.
  7. Reinstall the transmission without allowing its weight to hang on the clutch disc, service the release system, and verify full disengagement before road use.
  8. Follow the current XClutch break-in procedure, avoid abusive launches during bedding, and recheck for leaks, abnormal noise, or release problems after the initial service interval.

California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.

XClutch Stage 2 Clutch Kit for 2003-2006 Nissan 350Z / Infiniti G35

XCLUTCH
XCLXKNI25525-1C
9337467254679
Performance Clutch Kit
2 Units In Stock
$ 1,386.37 $ 1,242.73
$ 1,242.73

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×