-10%
XClutch XKSU23006-1AX Stage 1X clutch kit for Subaru and Saab applications on white
Click to zoom in
View vehicle applications

Description

Support higher-power Subaru street builds with an extra-heavy-duty organic disc

XClutch XKSU23006-1AX is a Stage 1X clutch kit for the listed Subaru and Saab manual-transmission applications. Its sprung organic disc is paired with an extra-heavy-duty pressure plate for a published 480 lb-ft torque capacity and 40 percent clamp-load increase while retaining a street-focused friction material.

Key Features

  • XClutch XKSU23006-1AX is matched to the verified application and configuration
  • Stage 1X extra-heavy-duty configuration for high-power street use
  • Published 480 lb-ft torque capacity including factor of safety
  • Published 40 percent increase in clamping force
  • Sprung organic friction disc
  • Release bearing, pilot bearing and alignment tool included
  • No flywheel is included; the existing compatible flywheel must meet service requirements

Application details and restrictions

Years Make Model Verified Configuration
2005 Saab 9-2X Aero 2.0L EJ205; supported manual transmission
2004-2006 Subaru Baja Turbo 2.5L EJ255; supported manual transmission
2004-2005 Subaru Forester XT 2.5L EJ255; supported manual transmission
2005 Subaru Forester XT Premium 2.5L EJ255; supported manual transmission
1998 Subaru Impreza RS Supported manual-transmission application
2002-2005 Subaru Impreza WRX 2.0L EJ205; supported manual transmission
1991-1994 Subaru Legacy Sport 2.2L; supported manual transmission

Specifications

Detail Value
Manufacturer Part Number XKSU23006-1AX
Stage Stage 1X Extra Heavy Duty
Recommended Use High-power street use
Published Torque Capacity 480 lb-ft including factor of safety
Clamping Force Increase 40 percent
Disc Diameter 9 1/16 in
Disc Material Organic
Disc Hub Sprung
Input Shaft 1 in; 24 splines
UPC 9337467254044

What's Included

  • One exact XClutch XKSU23006-1AX extra-heavy-duty pressure plate and sprung organic clutch disc
  • Release bearing
  • Pilot bearing
  • Clutch alignment tool and spline grease

About XClutch

XClutch is developed by Australian Clutch Services using in-house testing for street and motorsport applications. Each kit configuration matches a defined friction material, clamp load, torque capacity, input shaft and release arrangement, so those details must be confirmed before installation.

Related Parts

  • Inspect the application-correct release bearing, pilot bearing or bushing, clutch fork, pivot components and hydraulic system before installation.
  • Match replacement flywheel, fasteners, seals and service parts by their own exact manufacturer applications; no unverified external or internal product link is included.

FAQ

What is the XKSU23006-1AX?

It is an XClutch Stage 1X extra-heavy-duty sprung organic single-disc clutch kit for the listed Subaru and Saab turbo/manual applications plus the explicitly supported 1998 Impreza RS and 1991-1994 Legacy Sport.

Which vehicle configuration must be confirmed?

Confirm the listed Subaru and Saab turbo/manual applications plus the explicitly supported 1998 Impreza RS and 1991-1994 Legacy Sport, including the stated engine, trim and manual-transmission application.

What friction material does this kit use?

The exact friction material and sprung-hub configuration are stated in the Specifications section and must match the intended street or track use.

Is the flywheel included?

No. XClutch lists no flywheel in this configuration; inspect and service the compatible flywheel according to current specifications.

What is not included?

A flywheel and unrelated hydraulic, seal or installation parts are not included unless separately identified in the sealed kit.

Can clutch feel or cabin noise change?

Yes. XClutch states that performance upgrades can change pedal effort, engagement, noise, vibration or harshness, especially when a single-mass flywheel conversion is included.

What related parts should be inspected?

Inspect the release system, clutch fork or hydraulics, transmission input shaft, seals, mounting hardware and flywheel interface before assembly.

Is professional installation recommended?

Yes. Correct transmission removal, clutch orientation, fastener torque, release-system setup and break-in are important to operation and service life.

Installation Instructions

  1. Confirm XClutch XKSU23006-1AX, the application, and every listed restriction before installation.
  2. Disconnect battery power, support the vehicle and transmission safely, and remove the transmission using current vehicle service information.
  3. Inspect the release system, pilot support, transmission input shaft, seals and flywheel; correct wear or leakage before assembly.
  4. Prepare the compatible flywheel to current XClutch and vehicle requirements and clean every friction surface with residue-free cleaner.
  5. Install the sprung organic disc in the correct orientation, align it with the supplied tool and fit the pressure plate evenly.
  6. Tighten all fasteners gradually to current specifications, reinstall the transmission without hanging its weight on the disc and verify complete release-system operation.
  7. Follow the current XClutch break-in procedure and recheck for leaks, abnormal noise or release problems after initial use.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

XClutch Stage 1X Clutch for Subaru and Saab Turbo Applications

XCLUTCH
XCLXKSU23006-1AX
9337467254044
Clutch Kits - Single
1 Units In Stock
$ 783.60 $ 700.24
$ 700.24

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×