-9%
XClutch XKMI23433-1A Stage 1 clutch kit for Mitsubishi Lancer 2.0L on white
Click to zoom in
View vehicle applications

Description

Improve Lancer clamp load while retaining an organic street friction disc

XClutch XKMI23433-1A is a Stage 1 clutch kit for the supported Mitsubishi Lancer 2.0L manual applications. The sprung organic disc prioritizes street drivability while the pressure plate provides a published 60 percent clamp-load increase and 210 lb-ft torque capacity including factor of safety.

Key Features

  • XClutch XKMI23433-1A is matched to the verified application and configuration
  • Stage 1 sprung organic configuration for street use
  • Published 60 percent increase in clamping force
  • Published 210 lb-ft torque capacity including factor of safety
  • Hydraulic release bearing and clutch slave cylinder included
  • Organic friction material for progressive engagement
  • No flywheel, pilot bearing or alignment tool is included in this configuration

Application details and restrictions

Years Make Model Verified Configuration
2008-2013 Mitsubishi Lancer DE 2.0L; supported manual transmission
2008-2017 Mitsubishi Lancer ES 2.0L; supported manual transmission
2011 Mitsubishi Lancer ES Sportback 2.0L; supported manual transmission
2008 Mitsubishi Lancer GTS 2.0L; supported manual transmission

Specifications

Detail Value
Manufacturer Part Number XKMI23433-1A
Stage Stage 1
Recommended Use Street use
Published Torque Capacity 210 lb-ft including factor of safety
Clamping Force Increase 60 percent
Disc Diameter 8 27/32 in
Disc Material Organic
Disc Hub Sprung
Flywheel Step -0.256 in
Input Shaft 7/8 in; 20 splines
UPC 9337467336733

What's Included

  • One exact XClutch XKMI23433-1A pressure plate and sprung organic clutch disc
  • Clutch slave cylinder and hydraulic release bearing

About XClutch

XClutch is developed by Australian Clutch Services using in-house testing for street and motorsport applications. Each kit configuration matches a defined friction material, clamp load, torque capacity, input shaft and release arrangement, so those details must be confirmed before installation.

Related Parts

  • Inspect the application-correct release bearing, pilot bearing or bushing, clutch fork, pivot components and hydraulic system before installation.
  • Match replacement flywheel, fasteners, seals and service parts by their own exact manufacturer applications; no unverified external or internal product link is included.

FAQ

What is the XKMI23433-1A?

It is an XClutch Stage 1 sprung organic single-disc clutch kit for the listed 2008-2017 Mitsubishi Lancer 2.0L trims with the supported manual transmission.

Which vehicle configuration must be confirmed?

Confirm the listed 2008-2017 Mitsubishi Lancer 2.0L trims with the supported manual transmission, including the stated engine, trim and manual-transmission application.

What friction material does this kit use?

The exact friction material and sprung-hub configuration are stated in the Specifications section and must match the intended street or track use.

Is the flywheel included?

No. This configuration does not include a flywheel or flywheel bolts; inspect and service the compatible flywheel according to current specifications.

What is not included?

A flywheel, flywheel bolts, pilot bearing, pressure-plate bolts and alignment tool are not included according to the exact-product listing.

Can clutch feel or cabin noise change?

Yes. XClutch states that performance upgrades can change pedal effort, engagement, noise, vibration or harshness, especially when a single-mass flywheel conversion is included.

What related parts should be inspected?

Inspect the release system, clutch fork or hydraulics, transmission input shaft, seals, mounting hardware and flywheel interface before assembly.

Is professional installation recommended?

Yes. Correct transmission removal, clutch orientation, fastener torque, release-system setup and break-in are important to operation and service life.

Installation Instructions

  1. Confirm XClutch XKMI23433-1A, the application, and every listed restriction before installation.
  2. Disconnect battery power, support the vehicle and transmission safely, and remove the transmission using current Mitsubishi service information.
  3. Inspect the hydraulic system, input shaft, seals, flywheel and mounting hardware before assembly.
  4. Prepare the compatible flywheel to current specifications and clean every friction surface with residue-free cleaner.
  5. Orient the sprung organic disc correctly, align it with an application-appropriate tool and fit the pressure plate evenly.
  6. Install and bleed the supplied slave-cylinder and hydraulic-release assembly using the current XClutch procedure.
  7. Tighten all fasteners to current specifications, reinstall the transmission without loading the disc and complete the required break-in before demanding use.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

XClutch Stage 1 Clutch for 2008-2017 Mitsubishi Lancer 2.0L

XCLUTCH
XCLXKMI23433-1A
9337467336733
Clutch Kits - Single
1 Units In Stock
$ 729.04 $ 656.14
$ 656.14

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×