View vehicle applications
Fitment notes and restrictions
Description
Add ceramic heat capacity with a matched Fiesta ST flywheel conversion
XClutch XKFD22627-1B is a Stage 2 track-use clutch package for the supported Ford Fiesta ST 1.6L. It combines a sprung ceramic disc with a single-mass chromoly flywheel and hydraulic release components for a published 450 lb-ft torque capacity including the manufacturer's factor of safety.
Key Features
- XClutch XKFD22627-1B is matched to the verified application and configuration
- Stage 2 sprung ceramic configuration for track use
- Published 450 lb-ft torque capacity including factor of safety
- Published 20 percent increase in clamping force
- Single-mass chromoly flywheel conversion included
- Clutch slave cylinder and hydraulic release bearing included
- Ceramic engagement and single-mass conversion can increase noise, vibration and harshness
Application details and restrictions
| Years | Make | Model | Verified Configuration |
|---|---|---|---|
| 2014-2019 | Ford | Fiesta ST | 1.6L turbo; supported manual transmission |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | XKFD22627-1B |
| Stage | Stage 2 |
| Recommended Use | Track use |
| Published Torque Capacity | 450 lb-ft including factor of safety |
| Clamping Force Increase | 20 percent |
| Disc Diameter | 9 in |
| Disc Material | Ceramic |
| Disc Hub | Sprung |
| Flywheel | Single-mass chromoly; included |
| Flywheel Step | -0.323 in |
| Input Shaft | 57/64 in; 20 splines |
| UPC | 9337467329056 |
What's Included
- One exact XClutch XKFD22627-1B pressure plate and sprung ceramic clutch disc
- Single-mass chromoly flywheel
- Clutch slave cylinder and hydraulic release bearing
- Flywheel bolts and pressure-plate bolts
- Clutch alignment tool and spline grease
About XClutch
XClutch is developed by Australian Clutch Services using in-house testing for street and motorsport applications. Each kit configuration matches a defined friction material, clamp load, torque capacity, input shaft and release arrangement, so those details must be confirmed before installation.
Related Parts
- Inspect the application-correct release bearing, pilot bearing or bushing, clutch fork, pivot components and hydraulic system before installation.
- Match replacement flywheel, fasteners, seals and service parts by their own exact manufacturer applications; no unverified external or internal product link is included.
FAQ
What is the XKFD22627-1B?It is an XClutch Stage 2 sprung ceramic single-disc clutch kit for 2014-2019 Ford Fiesta ST with the 1.6L turbo engine and supported manual transmission.
Which vehicle configuration must be confirmed?Confirm 2014-2019 Ford Fiesta ST with the 1.6L turbo engine and supported manual transmission, including the stated engine, trim and manual-transmission application.
What friction material does this kit use?The exact friction material and sprung-hub configuration are stated in the Specifications section and must match the intended street or track use.
Is the flywheel included?Yes. This configuration includes the specified single-mass chromoly flywheel and its listed flywheel bolts.
What is not included?XClutch does not list a pilot bearing in this configuration. Unrelated seals, forks, hydraulic lines and installation labor are not included.
Can clutch feel or cabin noise change?Yes. XClutch states that performance upgrades can change pedal effort, engagement, noise, vibration or harshness, especially when a single-mass flywheel conversion is included.
What related parts should be inspected?Inspect the release system, clutch fork or hydraulics, transmission input shaft, seals, mounting hardware and flywheel interface before assembly.
Is professional installation recommended?Yes. Correct transmission removal, clutch orientation, fastener torque, release-system setup and break-in are important to operation and service life.
Installation Instructions
- Confirm XClutch XKFD22627-1B, the application, and every listed restriction before installation.
- Disconnect battery power, support the vehicle and transmission safely, and remove the transmission using current Ford service information.
- Inspect the rear main seal, transmission input seal, hydraulics, input shaft and mounting surfaces before assembly.
- Remove the original clutch and flywheel, clean the crankshaft interface and install the supplied single-mass flywheel with the listed bolts.
- Orient and align the sprung ceramic disc, fit the pressure plate and tighten all fasteners gradually to current specifications.
- Install and bleed the supplied slave-cylinder and hydraulic-release assembly according to the current XClutch bulletin.
- Reinstall the transmission without loading the disc, verify release operation and follow the current XClutch break-in procedure before demanding use.
California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.




