-13%
XClutch XKAU23023-1A Stage 1 clutch kit for Volkswagen Golf 1.4L on white
Click to zoom in
View vehicle applications

Description

Increase Golf 1.4L torque capacity without giving up an organic street disc

XClutch XKAU23023-1A is a Stage 1 clutch kit for the supported Volkswagen Golf 1.4L manual applications. Its sprung organic disc is designed for street drivability while the pressure-plate design raises the published torque capacity to 350 lb-ft including the manufacturer's factor of safety.

Key Features

  • XClutch XKAU23023-1A is matched to the verified application and configuration
  • Stage 1 configuration for performance street use
  • Sprung organic disc for progressive engagement and dampening
  • Published 28 percent increase in clamping force
  • Published 350 lb-ft torque capacity including factor of safety
  • Release bearing, pilot bearing and alignment tool included
  • Original flywheel is not included and must meet the applicable service requirements

Application details and restrictions

Years Make Model Verified Configuration
2019 Volkswagen Golf S 1.4L DGXA; manual transmission
2019 Volkswagen Golf SE 1.4L DGXA; manual transmission
2020-2021 Volkswagen Golf TSi 1.4L DGXA; manual transmission

Specifications

Detail Value
Manufacturer Part Number XKAU23023-1A
Stage Stage 1
Recommended Use Street use
Published Torque Capacity 350 lb-ft including factor of safety
Clamping Force Increase 28 percent
Disc Diameter 9 in
Disc Material Organic
Disc Hub Sprung
Flywheel Step -0.488 in
Input Shaft 7/8 in; 28 splines
UPC 9337467342680

What's Included

  • One exact XClutch XKAU23023-1A pressure plate and sprung organic clutch disc
  • Release bearing
  • Pilot bearing
  • Clutch alignment tool

About XClutch

XClutch is developed by Australian Clutch Services using in-house testing for street and motorsport applications. Each kit configuration matches a defined friction material, clamp load, torque capacity, input shaft and release arrangement, so those details must be confirmed before installation.

Related Parts

  • Inspect the application-correct release bearing, pilot bearing or bushing, clutch fork, pivot components and hydraulic system before installation.
  • Match replacement flywheel, fasteners, seals and service parts by their own exact manufacturer applications; no unverified external or internal product link is included.

FAQ

What is the XKAU23023-1A?

It is an XClutch Stage 1 sprung organic single-disc clutch kit for 2019 Golf S or SE and 2020-2021 Golf TSi with the 1.4L DGXA engine and supported manual transmission.

Which vehicle configuration must be confirmed?

Confirm 2019 Golf S or SE and 2020-2021 Golf TSi with the 1.4L DGXA engine and supported manual transmission, including the stated engine, trim and manual-transmission application.

What friction material does this kit use?

The exact friction material and sprung-hub configuration are stated in the Specifications section and must match the intended street or track use.

Is the flywheel included?

No. XClutch lists no flywheel in this configuration; inspect and service the compatible flywheel according to current specifications.

What is not included?

A flywheel and unrelated actuation, seal or installation parts are not included unless separately identified in the sealed kit.

Can clutch feel or cabin noise change?

Yes. XClutch states that performance upgrades can change pedal effort, engagement, noise, vibration or harshness, especially when a single-mass flywheel conversion is included.

What related parts should be inspected?

Inspect the release system, clutch fork or hydraulics, transmission input shaft, seals, mounting hardware and flywheel interface before assembly.

Is professional installation recommended?

Yes. Correct transmission removal, clutch orientation, fastener torque, release-system setup and break-in are important to operation and service life.

Installation Instructions

  1. Confirm XClutch XKAU23023-1A, the application, and every listed restriction before installation.
  2. Disconnect battery power, support the vehicle and transmission safely, and remove the transmission using current Volkswagen service information.
  3. Inspect the release system, pilot support, transmission input shaft, seals and flywheel; correct wear or leakage before assembly.
  4. Prepare the compatible flywheel to the current XClutch and Volkswagen requirements and clean every friction surface with residue-free cleaner.
  5. Install the sprung organic disc in the correct orientation, align it with the supplied tool and fit the pressure plate evenly.
  6. Tighten fasteners gradually to current specifications, reinstall the transmission without hanging its weight on the disc and verify full release-system travel.
  7. Follow the current XClutch break-in procedure and recheck for leaks, abnormal noise or release problems after initial use.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

XClutch Stage 1 Clutch for 2019-2021 Volkswagen Golf 1.4L

XCLUTCH
XCLXKAU23023-1A
9337467342680
Clutch Kits - Single
1 Units In Stock
$ 626.51 $ 542.99
$ 542.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×