-5%
Zone Offroad ZOND40F six-inch Ram 1500 lift kit components
Click to zoom in
View vehicle applications

Description

Clear larger tires while preserving corrected suspension geometry

Zone Offroad ZOND40F is the six-inch suspension system for supported 2013-2018 Ram 1500 4WD trucks using factory front struts, three-inch rear coil springs, and FOX 2.0 Adventure Series rear shocks. The truck must meet every drivetrain, suspension, wheel, tire, and ride-height restriction below.

Key Features

  • Zone Offroad ZOND40F raises the front approximately six inches and uses three-inch rear coil springs
  • High-strength replacement steering knuckles correct steering geometry
  • Crossmembers, differential relocation components, and a heavy-duty differential skid plate address driveline and suspension positioning
  • Top-mount strut and preload spacers retain the factory front struts
  • FOX 2.0 Adventure Series monotube rear shocks use internal floating pistons and application-specific valving
  • Fabricated steel components use a durable powder-coated finish
  • Allows up to 37 x 12.50 tires with the verified wheel and trimming requirements

Application details and restrictions

Years Make Model Required Configuration
2013-2018 Ram 1500 Not specified

Specifications

Detail Value
Manufacturer Part Number ZOND40F
Front Lift 6 inches
Rear Lift 3-inch coil springs
Front Lift Method Crossmember and factory-strut spacer system
Rear Shock FOX 2.0 Adventure Series
Drive Type 4WD only
Maximum Tire Up to 37 x 12.50 with verified wheel backspacing and possible trimming
17 x 9 Wheel 4.5-inch backspacing
18 x 9 Wheel 5-inch backspacing
20 x 9 Wheel 5-inch backspacing

What's Included

  • Zone Offroad ZOND40F six-inch front and three-inch rear suspension system
  • High-strength steering knuckles, crossmembers, differential relocation components, skid plate, and strut spacers
  • Three-inch rear coil springs and two FOX 2.0 Adventure Series rear shocks
  • Application-specific brackets, links, spacers, and installation hardware shown in the exact manufacturer configuration
  • Wheels, tires, factory struts, alignment, installation labor, and unrelated service parts are not included

About Zone Offroad

Zone Offroad engineers suspension systems for application-specific stance, tire clearance, and corrected steering and driveline geometry. Its Ram 1500 system uses heavy-duty fabricated and machined components together with FOX rear dampers for street and off-road use.

Related Parts

  • Select wheels, tires, alignment components, replacement struts, and driveline service parts only after confirming the exact truck configuration and Zone installation requirements.

FAQ

What is the ZOND40F?

It is the Zone Offroad six-inch lift configuration with factory-strut spacers, three-inch rear coil springs, and FOX rear shocks for supported Ram 1500 4WD trucks.

Does it fit trucks with air suspension?

No. Zone excludes trucks equipped with adjustable air suspension.

Does it fit EcoDiesel models?

No. EcoDiesel applications are excluded.

Can factory 17-inch wheels be reused?

No. Zone states that factory 17-inch wheels cannot be reinstalled with this system.

What tire size can be used?

Zone lists up to a 37 x 12.50 tire with the specified wheel sizes and backspacing; trimming may be required.

Which rear springs and shocks are included?

This exact configuration uses three-inch rear coil springs and FOX 2.0 Adventure Series rear shocks.

Is professional installation recommended?

Yes. The system changes steering, suspension, differential, and driveline geometry and should be installed and aligned by a qualified shop.

What should be checked after installation?

Complete a professional alignment, verify brake-line and driveline clearance, torque every fastener, check ride height and steering travel, and re-torque the system after the manufacturer-specified break-in interval.

Installation Instructions

  1. Confirm the 2013-2018 Ram 1500 4WD application, suspension type, engine, wheel size, rear ride height, and Zone Offroad ZOND40F before disassembly.
  2. Read the complete current Zone instructions and inventory every component before supporting the truck and removing suspension parts.
  3. Install the crossmembers, differential relocation components, skid plate, steering knuckles, and front strut spacers in the manufacturer sequence.
  4. Install the three-inch rear coil springs, FOX rear shocks, links, brackets, and supplied hardware while maintaining brake-line and wiring clearance.
  5. Cycle the steering and suspension through their travel and check driveshaft, brake-line, ABS-wire, tire, wheel, and chassis clearance.
  6. Torque every fastener to the current Zone and vehicle specifications with the suspension at the required ride position.
  7. Perform a professional alignment, road-test at low speed, verify stable steering and braking, and re-torque the system after the specified break-in interval.

Zone Offroad 6-Inch Lift Kit for 2013-2018 Ram 1500 4WD

Zone Offroad
ZORZOND40F
Lift Kits
2 Units In Stock
$ 1,700.67 $ 1,613.28
$ 1,613.28

Translation missing: en.boa_product_preview.application_requirements 2013-2018 Ram 1500 4WD only. Does not fit AWD, adjustable air suspension, EcoDiesel, or TRX applications. Factory 17-inch wheels cannot be reinstalled. Front driveshaft life may be reduced. Measure factory front-to-rear ride height before choosing rear lift configuration.
View vehicle applications →

Translation missing: en.boa_product_preview.application_requirements

2013-2018 Ram 1500 4WD only. Does not fit AWD, adjustable air suspension, EcoDiesel, or TRX applications. Factory 17-inch wheels cannot be reinstalled. Front driveshaft life may be reduced. Measure factory front-to-rear ride height before choosing rear lift configuration.

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×