Explore Bed Rails at Black Ops Auto Works. Match the exact truck configuration, cab style and bed dimensions where applicable. Check mounting points, clearance with existing accessories and the brackets or hardware supplied.
- Cab and bed-configuration checks
- Mounting and accessory compatibility
- Bracket and hardware contents
Questions about Bed Rails? Ask our team before ordering or call (855) 221-9728.
Shop Go Rhino truck bed rails in black powder-coated steel, with no-drill stake-pocket rail pairs for selected pickups and 36-inch or 47.5-inch universal drill-on options. Whether you are finishing a classic GM truck, updating a Ford Ranger or planning a bed layout around a toolbox, start with the rail designed for your mounting arrangement.
Black Ops Auto Works carries both stake-pocket bed rails and universal truck bed rails. Compare the actual Go Rhino part numbers below, then confirm your bed length, mounting geometry and accessory clearance. Every listing identifies a rail pair; the two UB universal options are supplied without separate base plates.
Compare Go Rhino Bed Rails by Part Number
| Part | Rail / Application | Mounting |
|---|---|---|
| 8061B | Selected GM C/K trucks; 6.5-ft bed | Factory stake pockets |
| 8154B | 1992–2011 Ford Ranger; 6-ft bed | Factory stake pockets |
| 8128B | Selected GM, Dodge and Ram; specified 6-ft-4-in or 6-ft-6-in bed | Factory stake pockets |
| 8036UB | 36-inch rail length; no separate base plates | Universal drill-on |
| 8048UB | 47.5-inch rail length; no separate base plates | Universal drill-on |
Use the universal rail measurements to plan available mounting space. Use the vehicle-specific bed requirements to check factory stake-pocket fitment. Those are different measurements: a 36-inch rail is not a rail for a 36-inch truck bed.
Stake-Pocket Bed Rails for Compatible Pickup Beds
Stake-pocket rails mount at the factory openings along the bed sides. The Go Rhino options here use steel tubing with a black powder-coated finish. For the correct application, their mounting arrangement avoids drilling new holes. Confirm that the pockets are accessible and the mounting locations match before treating any rail as a direct fit.
The 8154B listing is for selected 1992–2011 Ford Ranger applications with a 6-foot bed. The 8061B serves selected GM C/K applications with a 6.5-foot bed, while 8128B covers selected GM, Dodge and Ram applications with the specified 6-foot-4-inch or 6-foot-6-inch bed. Check each product’s application notes rather than assuming all beds in those vehicle ranges share the same layout.
Universal Bed Rails in 36-inch and 47.5-inch Lengths
Go Rhino 8036UB and 8048UB offer shorter, universal drill-on mounting configurations. Their 36-inch and 47.5-inch dimensions describe the rails, not the truck bed. Both listings are black steel rail pairs without separate base plates. Measure the usable mounting area and confirm hardware access below it before choosing a length.
These shorter rails can be useful when a cross-bed toolbox occupies part of the bed side. Check where the toolbox ends, how its lid opens and where the rail feet will attach. Universal mounting allows a dimension-selected layout; it does not establish compatibility with every truck, bed cap or cargo system.
Check Tonneau-Cover, Toolbox and Bed-Cap Clearance
Bed rails and other accessories may need the same mounting space. Compare rail feet with tonneau clamps, stake-pocket covers, bed-side storage and toolbox hardware. Allow room for the cover or toolbox lid to move through its full travel. If a cap covers the stake pockets, confirm access and installation requirements before ordering a stake-pocket rail pair.
For related equipment, browse truck bed accessories. Channel-mounted anchors and restraint accessories are listed separately in cargo tie-downs; an ADARAC channel anchor requires its compatible rail system and is not a replacement for a tubular bed rail.
Choose Your Part
- Choose factory stake-pocket mounting or a universal drill-on rail.
- Match the truck bed or measure the available mounting surface.
- Compare rail length, package contents and base-plate configuration.
- Check tonneau, toolbox, bed-cap and hardware clearance.
Frequently Asked Questions
How do I choose the right truck bed rails?
Match the mounting style first. For stake-pocket rails, confirm the truck, required bed length and pocket spacing. For universal rails, measure the available mounting surface and rail length, check underside access and plan the required drilling.
Are stake-pocket bed rails no-drill?
The Go Rhino stake-pocket rails in this collection use the intended factory pockets without drilling for a compatible application. Check the exact part number, bed configuration and current installation instructions before ordering.
Do universal bed rails require drilling?
Yes. The 36-inch 8036UB and 47.5-inch 8048UB are universal drill-on rails. Both are listed without separate base plates. They are selected by dimensions and mounting space rather than a guaranteed year/make/model fit.
Is rail length the same as truck bed length?
No. A 36-inch or 47.5-inch universal rail measurement describes the rail itself. A 6-foot or 6.5-foot application describes the truck bed. Use the correct measurement when comparing a rail with a toolbox or factory mounting points.
Will bed rails work with my tonneau cover or toolbox?
Compatibility depends on the rail feet, cover clamps, lid movement and available bed-side space. Compare the complete layout before buying. A shorter universal rail may suit some toolbox installations, but no single rail fits every accessory combination.
Are these rails sold individually or as a pair?
The Go Rhino bed-rail listings in this collection are sold as pairs. Check the exact SKU for mounting hardware and whether separate base plates are included; the two universal UB listings do not include them.
Are tubular bed rails the same as bed-rail caps or track tie-downs?
No. Tubular rails, protective caps and channel-mounted cargo anchors are different products. Choose the hardware intended for the installed system. Find channel-mounted anchors and other restraint accessories in Cargo Tie-Downs.
Recently Viewed Products
Military & First Responders
A program for military members and first responders, with dedicated verification and support for your next build.


