Click to zoom in
Adjustable Billet Rear Toe Arms That Replace The Factory Cam Bolts
The AAD Performance C014-0000 adjustable billet rear toe arms give a Dodge Challenger, Charger, Magnum or Chrysler 300 a fixed, repeatable rear toe setting. A tab system replaces the factory cam bolts, an Energy Suspension polyurethane bushing sits inboard and a Spheriflex bushing controls the outboard end.
Fitment
| Make | Model | Years | Submodel |
|---|---|---|---|
| Dodge | Charger | 2006-2020 | Compatible original suspension; exact trim, drivetrain and modifications require confirmation. |
| Dodge | Challenger | 2008-2020 | Compatible original suspension; exact trim, drivetrain and modifications require confirmation. |
| Chrysler | 300 | 2006-2020 | Compatible original suspension; exact trim, drivetrain and modifications require confirmation. |
| Dodge | Magnum | 2006-2008 | Compatible original suspension; exact trim, drivetrain and modifications require confirmation. |
The manufacturer lists 2006 to 2020 Dodge Challenger, Charger, Magnum and Chrysler 300. Confirm the vehicle against this list before ordering the C014-0000.
C014-0000 is the selected rear adjustable toe-link family for the manufacturer-listed 2006–2020 Challenger, Charger, Magnum and Chrysler 300 application, with the compatible rear cradle/knuckle and cam-adjuster lockout arrangement. The manufacturer says these clear MOST 15-inch wheels, not every wheel, and warns that clearance is limited on very low cars. Check actual wheel, brake, suspension-travel and lowered-ride clearance rather than selecting by wheel diameter alone. Existing model-year tags remain unchanged and conditional on the correct chassis; no later-year or different drivetrain approval is inferred from a shared Hellcat/Demon name. Toe adjustment requires an alignment after the links and lockouts are installed.
Specifications
| Detail | Value |
|---|---|
| Manufacturer part number family | C014-0000 |
| Material | 6061 billet aluminum |
| Inner bushing | Energy Suspension polyurethane |
| Outer bushing | Spheriflex |
| Adjustment | Tab system replacing factory cam bolts |
| Wheel clearance | Clears most 15 inch wheels without modification |
| Shipping weight | 7.5 lb |
| Finishes offered here | Black, Red, Blue |
| Country of manufacture | United States |
All specifications listed here are published by the manufacturer for the C014-0000.
What's Included
- Pair of C014-0000 adjustable billet rear toe arms
- Installation hardware
- Custom made lockout plates
- Printed instructions
About AAD Performance
AAD Performance, also listed under the All Angles Design vendor name, designs and machines billet aluminum suspension, driveline and engine hardware in Kansas City, Missouri. The company is known for its patent pending Spheriflex bearing, its tab-lock adjustment system and OEM-CAD derived fitment, and it manufactures, assembles and packages its parts in the United States.
Warranty: AADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.
Related Parts
FAQ
What is the C014-0000?It is the AAD Performance adjustable billet rear toe arm family for Challenger, Charger, Magnum and Chrysler 300 models.
Do these replace the factory cam bolts?Yes. The tab system takes over from the factory cam bolt adjustment and lockout plates hold the factory adjusters still.
What bushings are used?An Energy Suspension polyurethane bushing inboard and a Spheriflex bushing outboard.
Will they clear small wheels?The manufacturer states they clear most fifteen inch wheels with no modification.
Which years does the manufacturer list?2006 through 2020 for Challenger, Charger, Magnum and Chrysler 300.
Are lockout plates included?Yes, custom made lockout plates are supplied with the arms.
Is clearance an issue on a very low car?The manufacturer warns that clearance is limited on very low cars, so check before ordering.
Which finishes are stocked here?Black, Red and Blue.
Is a rear alignment needed?Yes. Set the tabs and then confirm rear toe on an alignment rack.
What warranty applies?AADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.
Installation Instructions
- Raise and safely support the rear of the vehicle and remove the rear wheels.
- Unload the rear suspension before loosening the toe link hardware.
- Remove the factory toe link and the factory cam bolt hardware.
- Fit the custom lockout plates so the factory adjustment cannot move.
- Install the new arm with the tabs set for the target toe value.
- Torque all fasteners to factory specification at ride height.
- Repeat on the opposite side.
- Align the rear axle and confirm the toe reading, noting that very low cars have limited clearance.
- Refer to the manufacturer LCLX rear toe instruction sheet for torque values.
Alignment Components
Shop alignment components for a suspension correction or a more adjustable chassis setup at Black Ops Auto Works. Compare Black Ops Auto Works and AAD arm or toe-link options with SPC, Eibach, SuperPro and Whiteline correction components. Build the order around the angle and mounting position that need adjustment. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster or toe adjustment. Adjustable Control Arms and Toe LinksFor J...
View Alignment Components Products
All Angles Design
Shop All Angles Design suspension and billet performance parts at Black Ops Auto Works. Also known as AAD Performance, the brand offers application-specific control arms, alignment hardware, suspension components, and engine accessories. Explore options for select Dodge, Chrysler, Jeep, Ford Mustang, and Ram applications, then match each component to your vehicle and existing setup. AAD Performance Control Arms and Suspension Components The All Angles Design range includes billet upper control arms, trailing arms, tension arms, adjustable rear toe links, and suspension packages for supported platforms. Whether you are replacing individual components or planning a coordinated suspension upgrade, choose parts by mounting position, chassis, and intended use. Compare individual control arms with the contents of each suspension package. Front and rear components serve different purposes, and a complete rear package does not necessarily include front suspension hardware. Control Arm Adjus...
View All Angles Design Products
Chrysler 300 Parts and Accessories
Shop Chrysler 300 performance parts and accessories at Black Ops Auto Works. Compare Legmaker intake choices, AAD suspension arms, JXB driveshaft-carrier upgrades, Billet Technology catch cans and engine-bay details, plus body and wheel-project references. Choose around your engine, drive configuration and production year.Legmaker Intakes and Engine-Bay ChoicesChoose the intake layout for the installed engine and induction system. Legmaker’s 392 True CAI uses a fender-mounted carbon-fiber path, while the 392 HC short-ram reference has a different underhood arrangement. Separate 5.7L/6.1L and supercharger-specific systems need their own exact application. Compare filter location, throttle-body connection, IAT wiring and installation scope before selecting. Billet Technology catch cans address a separate PCV-routing project; match the engine, mounting and supplied plumbing rather than treating a cap-cover purchase as part of the same system.AAD Arms and Suspension ProjectsAAD referenc...
View Chrysler 300 Parts and Accessories Products
Control Arms
Shop control arms, camber arms, toe links and suspension links at Black Ops Auto Works. Compare Black Ops/AAD billet options for Jeep and Dodge platforms with SPC, SPL, Whiteline, SuperPro, ICON, QA1, Ridetech and other listed choices. Choose a replacement or alignment-adjustment component for the exact suspension position and intended ride height.Grand Cherokee, Durango and Mopar ChoicesChoose the alignment function before choosing the arm. Grand Cherokee and Durango references include front upper arms for their specified camber/caster adjustment, rear upper arms and separate rear toe links. Early and later front-arm applications are listed separately. Use the alignment measurements and exact year/trim to identify the required position, mounting arrangement and supported adjustment.Charger, Challenger, 300 and Magnum references include AAD front/rear upper arms, toe links and trailing/tension arms. Tab-based adjustment and threaded adjustment provide different setup methods. Select...
View Control Arms Products
Dodge Challenger Parts and Accessories
Shop Dodge Challenger parts for exhaust sound, intake projects, chassis work and everyday cabin care at Black Ops Auto Works. Compare engine-specific Borla and MBRP exhaust references, Legmaker, JLT and aFe intake choices, AAD arms and 3D MAXpider Kagu liners. Build around your exact generation, engine, drivetrain and trim.Exhaust Sound and Intake ChoicesCompare applicable Borla S-Type and MBRP systems by sound description, valves, material, connection points and tip arrangement. Intake references separately name V6, naturally aspirated HEMI and supercharged combinations. Match the engine, production range and current equipment before choosing a filter or housing design; review calibration requirements for the exact setup.AAD Arms and Drivetrain SupportChoose the chassis task before comparing AAD front upper, rear upper, toe and trailing/tension-arm references. They serve different suspension locations; compare adjustment needs, the joints being renewed and required alignment. A JXB...
View Dodge Challenger Parts and Accessories Products
Dodge Challenger SRT Hellcat Parts and Accessories
Shop Dodge Challenger Hellcat parts for intake and exhaust projects, brake service, suspension work and body details at Black Ops Auto Works. Compare Legmaker, JLT and aFe intake references, Borla exhaust choices, DBA brake components and KW V4 coilovers. Confirm exact production and Hellcat, Redeye, Demon or Widebody configuration for each part.Supercharged Intake and Exhaust ProjectsStart with the supported Hellcat, Redeye or Demon induction arrangement and production range before comparing Legmaker, JLT, aFe or K&N intake packages. A replacement filter and a complete intake supply different installation scopes. For exhaust, compare Borla S-Type or ATAK references with the named CORSA valved/Xtreme packages around sound preference, valve handling and outlet design. The no-tip Borla references use the specified factory bezel/valance arrangement; they are not tip-included packages.Brake Service and Suspension ChoicesChoose the brake repair scope before ordering a DBA complete tw...
View Dodge Challenger SRT Hellcat Parts and Accessories Products
Dodge Charger Parts & Accessories
Shop Dodge Charger parts and accessories for intake projects, chassis work and exterior or engine-bay finishing at Black Ops Auto Works. Explore Legmaker intake choices, AAD suspension arms, engine-specific catch cans, differential braces and Charger body components. Build around the actual generation, engine and installed drivetrain.Intake Layouts for HEMI and Supercharged BuildsChoose the actual engine and induction arrangement before comparing Legmaker 5.7L/6.1L, 392 HEMI, Hellcat/Redeye or Whipple 3.0/3.8 references. They name different supported layouts. Compare pipe/filter arrangement, mounts and calibration needs for that combination. A throttle body, thermostat or pulley supplies a separate component and needs its own complete installation plan rather than being treated as part of every intake package.AAD Arms and Differential BracesChoose the suspension position and adjustment task before selecting AAD front upper, rear upper, toe or trailing/tension arms. Compare the joint...
View Dodge Charger Parts & Accessories Products
Dodge Charger SRT Hellcat Parts & Accessories
Shop Dodge Charger SRT Hellcat parts for intake projects, chassis work and exterior or engine-bay finishing at Black Ops Auto Works. Compare Legmaker and JLT intake references, engine-specific catch cans, AAD arms and Charger hood, splitter and diffuser choices. Select around actual production, body configuration and current modifications.Intake and Supercharged Engine ProjectsCompare intake packages around the actual supercharger and production range. The JLT late-Hellcat reference names 2021–2023 Charger coverage, while aFe early-Hellcat and Legmaker Hellcat/Redeye references have separate applications. Match inlet connection, filter and mounts before planning calibration or companion parts. Cometic blower-snout, plenum and left/right head-gasket references seal different interfaces; select the service location and measured assembly specification independently.Catch Cans and Chassis SupportChoose Billet Technology, CORSA or AAD separation packages by their supported engine connect...
View Dodge Charger SRT Hellcat Parts & Accessories Products
Dodge Magnum Parts and Accessories
Shop Dodge Magnum parts for intake sound, exhaust projects, chassis adjustments and engine-bay details at Black Ops Auto Works. Compare Legmaker HEMI intake applications, AAD control arms and toe links, and the JXB driveshaft-carrier upgrade reference. Choose parts around your engine, drivetrain and the work planned for the car.Legmaker Intakes and Exhaust ChoicesCompare Legmaker True V2, Hammer, FrankenTake and headlight-intake references around the actual 5.7L/6.1L engine and supported installation. Magnuson, Edelbrock and Whipple-specific references name separate supercharger arrangements rather than universal substitutes. For exhaust, the MACH-X3-SRT-EM and STREET-RACE references distinguish SRT8 and 5.7L packages; compare the exact sound configuration, connections and full body/drivetrain coverage before choosing the supplied system.AAD Chassis Parts and JXB Driveshaft SupportChoose the actual chassis location and adjustment task before comparing AAD front/rear upper arms, trai...
View Dodge Magnum Parts and Accessories Products
Suspension
Shop suspension parts and kits for maintenance, ride-height changes and a coordinated handling setup. Compare springs, coilovers, dampers, control arms, sway bars, links and service components for the actual vehicle and its factory equipment. Start with the driving goal, then choose a compatible system and the parts needed to complete it.Springs, Coilovers and DampersLowering springs change the spring specification while retaining a compatible damper arrangement. A coilover package can combine springs and adjustable damper hardware, while a shock-and-spring service kit may supply complete corner assemblies. Compare the exact contents and adjustments for each reference.Swift, Eibach and Silver’s options appear alongside application-specific service and upgrade components. Choose the intended ride height, use and retained factory equipment, then review spring/damper compatibility, available travel and clearance.Arms, Links and Roll ControlControl arms and toe links locate the wheel an...
View Suspension Products