Drain Plugs collection banner

Shop Drain Plugs at Black Ops Auto Works. Before ordering, check system and housing application; thread size and sealing method; length and included washers. Match the exact product specification to your application and review the installation or use instructions.

  • System and housing application
  • Thread size and sealing method
  • Length and included washers

Questions about Drain Plugs? Ask our team before ordering or call (855) 221-9728.

Drain Plugs aftermarket parts and performance accessories

Shop magnetic drain plugs, differential fill plugs and fluid-service components at Black Ops Auto Works. Compare Mishimoto, GReddy, BLOX, Cusco, Skunk2, Project Kics, OMIX and other listed references for the exact port being serviced. Choose thread, sealing seat and installed clearance before comparing material or finish.

Magnetic Oil and Transmission Plugs

A magnetic plug can collect magnetically attracted wear particles for inspection during service. It does not replace the oil filter or establish that the engine or gearbox is healthy. Inspect the captured material and investigate an unusual change or large debris.

The selection includes metric sizes such as M12, M14, M16, M18 and M20 with different pitches. An M14×1.25 reference is not an M14×1.5 replacement. Match the actual pan/case and seating design rather than relying only on a brand’s broad vehicle family.

Single Plugs, Matched Sets and Sealing Components

Skunk2 and BLOX oil/transmission sets supply their stated combination, while other references are individual plugs. Confirm which system each piece fits and which washers or seals are supplied. A set does not mean its two ports have identical requirements.

Moroso O-ring plug references identify a different sealing arrangement from a crush-washer plug or tapered pipe thread. Use the exact specified seal and tightening instructions. Material and finish do not override thread and seat compatibility.

Differential Fill and Radiator References

Yukon and aFe differential-cover plugs must match the actual cover and port. A deep-reach magnetic fill plug or a particular NPT reference should not be substituted for another thread or reach merely because both fit a differential category.

The Koyo radiator drain plug is a separate cooling-system service component. Match the actual radiator and drain arrangement. The selection also contains ISR turbo oil-drain tubes/flanges, which route return oil rather than sealing an oil-pan drain hole.

Installation and Other Listed Components

Two Camburg uniball-cup references are suspension fabrication parts rather than fluid drain plugs. Select them by their own joint and fabrication requirements; category placement does not establish a fluid-system function.

Inspect threads and the sealing surface before assembly. Use the specified washer/O-ring and torque for the selected plug and pan/case, then check for leakage. If threads are damaged, establish a supported repair method rather than forcing a similar-looking plug into place.

Choose Your Part

  • Identify engine, transmission, differential, radiator or other component location.
  • Match thread diameter/pitch, sealing seat, reach and clearance.
  • Review individual plug, paired set and supplied washer/O-ring contents.
  • Inspect mating threads and use the exact installation procedure.

Frequently Asked Questions

What does a magnetic drain plug collect?

It attracts magnetic wear particles. It does not capture every contaminant or replace filtration and proper inspection.

Can metric plugs with the same diameter have different fitment?

Yes. Pitch, reach and sealing seat also matter. Match the complete thread and port specification.

Is a differential fill plug the same as an engine drain plug?

They serve different ports and can use different threads, seats and reach. Choose the exact component application.

What should I check on an oil/transmission plug set?

Confirm the assigned port for each piece and its thread, seal and supplied contents. Do not assume both plugs are identical.

Are the ISR turbo drain fittings oil-pan plugs?

They are separately specified turbo oil-return tubes/flanges, not conventional plugs for closing a drain port.

How tight should the selected plug be?

Follow the plug and mating pan/case instructions for seal type and torque. An arbitrary universal torque can damage threads or the seal.

Related Collections

Oil Pans · Oil Filters · Diff Covers · Differential Seal Kits

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×