Shop Fragola Performance Systems hose ends, AN fittings, adapters, hose assemblies, tubing, seals, and plumbing accessories at Black Ops Auto Works. Build a matched fuel, oil, coolant, brake, or power-steering system using components specified for the intended fluid, pressure, and temperature. Choose by exact part number and connection specification.
Fragola Hose Ends and Hose Families
The collection includes Push-Lite, Sport Crimp, PTFE, Race-Rite, and application-specific hose-end listings. These families use different hose constructions and assembly methods. An end with the correct nominal AN size is not automatically compatible with every hose carrying that size.
Confirm the exact hose series, size, liner, reinforcement, end design, and required assembly tools. Reusable, push-on, PTFE, and crimp connections should be assembled using the matching manufacturer's procedure. Verify crimp specifications and equipment where required.
AN Fittings, Port Adapters, and Unions
Explore straight and angled unions, bulkhead fittings, swivel reducers, banjo fittings, flare caps, and port adapters. Identify both ends of the connection. AN flare, O-ring boss, pipe thread, metric, and inverted-flare interfaces can have different threads and sealing methods.
Match thread pitch, seat angle, sealing face, material, and required washer or O-ring. Do not use thread appearance as the only identifier. Choose the fitting angle and orientation around the planned routing, support, and service access.
PTFE Assemblies and Brake Plumbing
Selected preassembled PTFE lines are available with specified lengths and end orientations. Brake adapters and other pressure-sensitive connections require the correct mating seat and application. Confirm the complete assembly's operating specification rather than assuming that all stainless-braided lines serve the same purpose.
Check length using the listing's measurement convention and allow for suspension or engine movement where relevant. Route lines away from exhaust heat, sharp edges, abrasion, and moving parts. Inspect completed systems using the manufacturer's leak-test procedure.
Choose Your Part
- Identify the fluid, operating pressure, temperature, and exact Fragola hose family.
- Match size, thread standard, sealing method, and material on both mating connections.
- Confirm fitting angle, hose length, port clearance, and required support.
- Verify every wetted liner, seal, O-ring, and fitting for the intended fuel or fluid.
- Check package quantity, assembly tools, and the current installation instructions.
Frequently Asked Questions
Will any AN hose end fit the same-size hose?
No. Hose ends must match the exact hose family and size. PTFE, push-on, reusable, and crimp systems use different attachment and sealing arrangements.
Are AN flare and O-ring boss fittings interchangeable?
They use different sealing interfaces. Match the thread, seat, and seal at each port, and use the correct adapter where the system requires different connection types.
Can Fragola plumbing handle E85 or methanol?
Confirm compatibility for the exact hose liner, fitting, seal, and O-ring, along with pressure and temperature. A material or brand name alone does not establish compatibility for the complete assembly.
How do I choose a preassembled line?
Match the stated length, fitting sizes, end angles, sealing seats, and intended service. Check routing and movement clearance before ordering.
Are seals and fittings supplied as sets?
Package quantity varies by part number. Some washers and O-rings are multipacks, while other listings supply a single fitting or assembly. Review the included quantity.
Shop Fragola Plumbing Components
Compare related fittings and adapters, hose and tubing, brake adapters, and O-rings. For help identifying a listing, contact Black Ops Auto Works with the Fragola part number and connection specifications.