Shop hydraulic flat-tappet and roller lifters, lash adjusters, lifter trays and related valvetrain components at Black Ops Auto Works. Compare COMP Cams, Ford Performance, GSC Power Division, AAD, Ferrea and other listed references for the engine actually being assembled. Choose a replacement, camshaft project or specific valvetrain service before selecting the package.
Flat-Tappet or Hydraulic Roller Lifters
COMP Cams references cover distinct engine families and lifter designs. A hydraulic flat-tappet lifter and a hydraulic roller lifter run on different camshaft designs; they are not interchangeable upgrades. Match cam type, lifter bore, oiling and valvetrain geometry with the engine builder.
The selection includes individual hydraulic lifters and sets such as the Chevrolet small-block Evolution roller package and Xtreme Energy DLC flat-tappet set. A coating or product-family name does not establish compatibility with another engine or cam. Use the selected cam/lifter manufacturer’s assembly, preload and break-in requirements.
Gen 3 HEMI Lifters and Retention Trays
The COMP non-MDS HEMI kit with four yokes serves a different order from the AAD aluminum Gen 3 HEMI trays. Trays locate the supported lifters; they are not themselves lifters and do not supply a complete camshaft conversion.
Identify MDS or non-MDS configuration and the exact lifter/tray combination. AAD distinguishes supported factory Mopar and Johnson configurations from dimensionally different alternatives. Do not assume every Gen 3 HEMI lifter fits every tray or that a non-MDS kit alone completes an MDS conversion.
LS DOD Projects and Ford Lash Adjusters
The COMP Gen IV 5.3L DOD Premium Kit addresses a particular engine project, rather than every LS application. Verify the installed engine generation, camshaft, required hardware and calibration plan with the exact kit instructions.
Ford Performance 302/351W roller lifters, Coyote lash adjusters and COMP Modular-engine lash adjusters belong to different valvetrain architectures. Match the actual head and cam arrangement; a Ford badge or cylinder count does not make those components interchangeable.
4G63 Lifters, Audi Shims and Related Service Parts
GSC 4G63 Zero-Tick references distinguish a broader package from an explicitly single-lifter listing. Select the exact quantity needed for the service, and diagnose the cause of valvetrain noise instead of treating the product name as a guarantee that any tick will disappear.
Ferrea Audi 2.0T FSI lifter-shim references are shims, not complete lifters. The Fleece Cummins rocker-arm assembly is also a separate valvetrain component. Match shim thickness or rocker configuration to the engine builder’s measured requirements.
Choose Your Part
- Identify engine family, cylinder head, camshaft type and MDS/DOD configuration.
- Choose lifters, lash adjusters, retention trays, shims or a broader conversion kit.
- Match oiling, geometry, specified preload and required supporting components.
- Compare single/set quantities and follow the exact assembly and break-in procedure.
Frequently Asked Questions
Can roller lifters be fitted to any flat-tappet cam?
No. Lifters and camshaft must be a compatible design. A roller conversion requires the supported camshaft, lifters and retention arrangement for the engine.
Are AAD lifter trays a set of lifters?
No. They retain supported lifters and are a separate component. Match the exact tray and lifter combination.
Does a non-MDS lifter kit complete every HEMI conversion?
No. Review the camshaft, hardware, oiling and calibration requirements for the actual engine and conversion plan.
Does every GSC 4G63 listing contain a full set?
No. An explicitly single-lifter reference is also listed. Compare the selected quantity and package.
Are the Ferrea lifter shims replacement lifters?
No. They are separate shims with specified dimensions and valvetrain requirements.
Will a new lifter guarantee that engine ticking stops?
No. Noise needs diagnosis; oiling, wear, assembly and other components can be involved. Choose parts for the identified repair.
Do flat-tappet and roller combinations use the same break-in procedure?
Do not assume so. Follow the exact camshaft and lifter manufacturer’s assembly and break-in instructions.
Related Collections
Camshafts · Rocker Arms · Heads & Components