MRR Wheels: Quality, Style & Safety for Every Ride

What This Brand Covers

MRR Design manufactures cast, flow-formed, and forged aftermarket wheels for luxury, muscle, and JDM applications. The lineup spans budget-friendly cast designs, mid-tier flow-formed wheels that balance weight and cost, and premium forged wheels for builds that demand the lowest unsprung weight.

Construction Methods

Cast MRR wheels are poured aluminum designs suited to daily drivers and replica-style fitments. Flow-formed wheels start as a cast blank and are spun and pressed under heat to align the aluminum grain in the barrel, producing a lighter and stronger wheel than pure cast at a lower cost than forged. Forged MRR wheels are pressed from a solid billet for the highest strength-to-weight ratio in the lineup.

FS Series Flow-Formed Wheels

The FS01 through FS12 series are MRR's core flow-formed lineup, covering multi-spoke, mesh, and split-spoke designs in diameters from 18 in to 24 in. Flow-formed construction reduces weight versus a comparable cast wheel while keeping pricing accessible for muscle car, truck, and daily-driver builds.

Popular FS Series Applications

FS01 through FS12 wheels are common fitments for Dodge Charger, Challenger, Durango, Jeep Grand Cherokee, and Hellcat and Trackhawk trims, along with Camaro, Corvette, and Mustang platforms looking for an aggressive staggered fitment at flow-formed pricing.

M017, M228, M350, M755, and M016 Series

The M-series covers a range of finishes and spoke designs targeting European and luxury platforms. The M228 is also offered as a multi-piece design, giving builders a choice between a monoblock and a multi-piece look with matching finish options.

M-Series European and Luxury Fitments

M017, M228, M350, M755, and M016 wheels are popular on BMW, Mercedes-Benz, and Tesla applications where a clean multi-spoke or mesh design pairs with factory-style bolt patterns and hub bores.

Forged FS Series

MRR's forged FS series takes the flow-formed FS design language and reproduces it in forged construction for builds that want the FS look with reduced unsprung weight. Forged FS wheels are the premium option in the MRR catalog for high-horsepower street builds and track-driven muscle cars.

MRR Wheels for Mopar Hellcat and Trackhawk Builds

Dodge Charger, Challenger, Durango, and Jeep Grand Cherokee Trackhawk applications commonly run 20 in to 24 in FS series wheels in staggered widths to clear big-brake Brembo calipers. Confirm offset and load rating carefully on Hellcat and Trackhawk builds given the added vehicle weight of the supercharged powertrain.

MRR Wheels for Camaro, Corvette, and Mustang

Chevrolet Camaro, Corvette, and Ford Mustang platforms run FS series flow-formed wheels and forged FS wheels in staggered fitments to match factory or upgraded brake packages and tire sizing for street and track use.

MRR Wheels for BMW, Mercedes, and Tesla

M-series wheels in the M017, M228, M350, M755, and M016 designs are popular for BMW 3-series and 5-series, Mercedes-Benz C-class and E-class, and Tesla Model 3 and Model Y builds looking for a factory-style bolt pattern with an upgraded finish and lighter flow-formed or forged construction.

MRR Wheel Finishes

MRR wheels are available in gloss black, matte black, silver machined face, gunmetal, bronze, and hyper silver finishes depending on series. Flow-formed and forged FS wheels typically offer the widest finish selection, while M-series wheels focus on machined and painted finishes suited to European platforms.

Top MRR Wheels Series

• FS01 to FS12. Flow-formed multi-spoke and mesh designs for muscle cars and trucks
• Forged FS Series. Forged versions of the FS design language for reduced unsprung weight
• M017. Multi-spoke design for European and luxury platforms
• M228. Available in monoblock and multi-piece construction
• M350. Mesh-style design for sedans and coupes
• M755. Split-spoke design for performance and luxury applications
• M016. Multi-spoke design with machined finish options

How to Choose the Correct MRR Wheel

• Confirm the exact year, make, model, and trim before selecting a diameter and width
• Verify bolt pattern (PCD) matches the vehicle hub exactly
• Confirm offset (ET) clears the brake caliper and fender at full steering lock
• Check center bore (CB) and order hubcentric rings if the wheel bore is larger than the hub
• Verify load rating meets or exceeds the vehicle's GAWR divided by two on trucks and SUVs
• Choose cast for budget builds, flow-formed for a weight and cost balance, forged for the lowest weight
• Confirm tire size clears the fender at the chosen width and offset
• Match finish to brake caliper color and body color for a cohesive look
• Order TPMS sensors and lug nuts or wheel bolts matched to the wheel and vehicle
• Torque wheels to manufacturer spec and re-torque after 50 miles

Common Questions

What does MRR Design manufacture?

MRR Design manufactures cast, flow-formed, and forged aftermarket wheels for luxury, muscle, and JDM applications, including the FS01 through FS12 flow-formed series, M-series European fitments, and the forged FS series.

Is MRR a reputable wheel brand?

Yes. MRR has an established presence in the aftermarket wheel market with a broad catalog spanning entry cast wheels through forged wheels for performance builds.

What vehicles do MRR wheels fit?

Popular fitments include Hellcat, Trackhawk, Charger, Challenger, Grand Cherokee, Durango, Camaro, Corvette, Mustang, BMW, Mercedes, and Tesla. Use the fitment filter on each product page to confirm your specific application.

Is Black Ops Auto Works an authorized MRR dealer?

Yes. Black Ops Auto Works is an authorized MRR Wheels dealer, so orders ship with full manufacturer support and warranty coverage.

What is the difference between the FS series and the forged FS series?

The standard FS series (FS01 through FS12) is flow-formed, meaning a cast blank is spun and pressed to align the barrel's aluminum grain. The forged FS series reproduces the same design language in forged construction for a lighter, stronger wheel at a higher price point.

Are M228 wheels available in multi-piece construction?

Yes. The M228 is offered in both monoblock and multi-piece construction, giving builders a choice of look and assembly style while keeping the same design.

Do these wheels come with a warranty?

Yes. All MRR Wheels products include the full manufacturer warranty. Terms vary by product line and finish.

How long does shipping take on MRR wheels?

Most in-stock MRR orders ship the same day. Delivery typically arrives in 2 to 5 business days depending on location.

Can I install MRR wheels myself?

Yes. Wheel installation is a standard bolt-on job for most enthusiasts. Torque to the manufacturer spec with a torque wrench and re-torque after the first 50 miles.

What is the return policy on MRR wheels?

Unused wheels in original packaging can be returned within 30 days. Mounted, installed, or custom-finished wheels are non-returnable.

Why Buy MRR Wheels from Black Ops Auto Works

Black Ops Auto Works stocks 3,338 MRR Wheels SKUs across cast, flow-formed, and forged construction with real fitment data, competitive pricing, and support from staff who build these platforms themselves. Products are filterable by year, make, model, trim, diameter, width, and bolt pattern to confirm the correct application before ordering.

For related shopping, browse our wheels, wheels and tires, wheel accessories, suspension, brakes, Dodge Challenger parts, Jeep Trackhawk parts, Chevrolet Camaro parts, Chevrolet Corvette parts, and Black Ops Auto Works.