Nitrous Express: High-Performance Nitrous Kits & Accessories

What This Brand Covers

Nitrous Express builds nitrous oxide injection systems ranging from complete bolt on kits to individual components for custom setups. This collection spans wet and dry nitrous kits, EFI plate and throttle body plate systems, bottles and brackets, solenoids, nozzles, purge kits, and the AN fittings and braided lines that plumb it all together.

Complete Nitrous Kits

Kits like the 4150 gasoline RNC system bundle the solenoids, nozzle, jetting, and wiring needed to add a nitrous shot to a carbureted or throttle body EFI engine, with bottle sizes from 10lb to 15lb or sold without a bottle.

EFI and Throttle Body Plate Systems

Direct fit plate systems are engineered for specific engines and throttle body configurations, delivering nitrous and fuel evenly across the intake for consistent power on late model EFI cars.

Ford Mustang Applications

Nitrous Express builds dedicated EFI plate conversions and dual throttle body plate systems for late model Ford Mustang 5.0L Coyote engines, including matching solenoid brackets for a clean under hood install.

Classic and 4-Valve Applications

Plate conversions for older Mustang Cobra and Mach 1 four valve engines let owners run nitrous through the factory EFI throttle body without swapping to a carburetor.

Bottles, Brackets, and Bottle Accessories

Nitrous bottles from 5lb to 15lb capacity, mounting brackets, bottle heaters, and blowdown tubes round out the hardware needed to safely carry and deliver nitrous oxide in the vehicle.

Bottle Heaters

12v bracket mounted bottle heaters maintain consistent bottle pressure in cold weather or between rounds at the track, helping keep nitrous flow consistent run to run.

Solenoids, Nozzles, and Purge Kits

Nitrous and fuel solenoids control the timed release of nitrous and fuel, while nozzles like the Piranha line atomize and distribute the mixture into the intake tract for even cylinder to cylinder distribution.

Purge Kits and LED Purge Lights

Purge kits clear air from the feed line before a pass, ensuring liquid nitrous reaches the solenoid immediately, while LED purge lights give the driver a visual cue when the system is armed and purging.

AN Fittings and Braided Lines

Nitrous Express stocks a full line of AN fittings, B-nuts, sleeves, swivels, and braided stainless PTFE hose used to plumb nitrous, fuel, and purge lines throughout the system.

Fitting Sizes and Angles

Fittings are available in straight, 45 degree, and 90 degree configurations across common AN sizes, letting installers route lines cleanly around engine bay obstacles.

Nitrous Cannons and High Output Delivery

Nitrous cannons and V-band assemblies are built for high output applications where a single nozzle cannot deliver enough flow, commonly seen on drag race and heavily built engines.

Tools and Fabrication Accessories

Tubing benders and related fabrication tools support custom nitrous line routing for racers building a system from individual components rather than a pre-packaged kit.

Top Nitrous Express Product Categories

• Complete Nitrous Kits. Bolt on wet and dry kits with bottle options
• EFI Plate Systems. Direct fit plate conversions for late model EFI engines
• Throttle Body Plate Systems. Dual and single throttle body nitrous plates
• Nitrous Bottles. 5lb to 15lb capacity bottles
• Bottle Brackets and Heaters. Mounting hardware and bottle heaters
• Solenoids. Nitrous and fuel solenoids for timed delivery
• Nozzles. Piranha and standard nozzles for mixture atomization
• Purge Kits. Line purge kits and LED purge lights
• AN Fittings. B-nuts, sleeves, swivels, and adapter fittings
• Braided PTFE Lines. Stainless braided hose for nitrous and fuel routing
• Nitrous Cannons. High output nozzle assemblies for drag applications
• Tubing Benders. Fabrication tools for custom line routing
• Blowdown Tubes. Safety venting components for nitrous bottles
• Jetting Kits. Nitrous and fuel jets for tuning shot size

How to Choose the Correct Nitrous Express Part

• Confirm the exact year, make, model, and engine before ordering a plate system
• Match plate or nozzle system to carbureted or EFI throttle body configuration
• Choose bottle size based on desired run time and vehicle mounting space
• Confirm AN fitting size matches your existing fuel and nitrous lines
• Check solenoid orifice size against your target horsepower shot
• Verify wiring and activation components are included or purchased separately
• Match nozzle jetting to your fuel type and target air fuel ratio
• Confirm bottle bracket mounting points fit your trunk or interior layout
• Check local and track rules on nitrous use before installing a system
• Review installation instructions for purge and blowdown line routing

Common Questions

Do I need a tune to run a Nitrous Express kit?

Most nitrous kits benefit from a supporting tune to set timing retard and fuel enrichment for the added shot, especially on EFI equipped vehicles with a stand alone or piggyback tuner.

What is the difference between wet and dry nitrous systems?

A wet system injects nitrous and fuel together through the same nozzle or plate, while a dry system injects only nitrous and relies on the factory fuel injectors for added fuel.

Does Nitrous Express make kits for Ford Mustang EFI engines?

Yes. Nitrous Express builds dedicated EFI plate conversions and dual throttle body plate systems for late model Mustang 5.0L Coyote engines and earlier 4 valve applications.

What bottle size do I need?

Bottle size depends on how much nitrous capacity you want on hand. 10lb bottles suit most street and bracket racing use, while 15lb bottles extend run time for repeated passes.

What is a purge kit used for?

A purge kit clears air from the feed line before a pass so liquid nitrous reaches the solenoid immediately, improving consistency at the moment of activation.

Are Nitrous Express fittings compatible with other brands?

AN fittings follow a standard thread specification, so Nitrous Express fittings are generally compatible with other AN fittings and braided lines of the same size.

Can nitrous be used with a turbocharged or supercharged engine?

Yes, though nitrous use on forced induction engines requires careful tuning and component selection to manage combined boost and nitrous cylinder pressure safely.

How often should nitrous bottles be inspected or recertified?

Nitrous bottles should be hydrostatically tested and recertified periodically per DOT regulations, and always inspected for damage before each use.

Do Nitrous Express kits include wiring and switches?

Many complete kits include basic wiring and a solenoid activation switch, but some setups require separate purchase of a full arming and activation wiring kit.

What is a nitrous cannon?

A nitrous cannon is a high output nozzle assembly designed for large nitrous shots on heavily built or drag specific engines that need more flow than a standard single nozzle.

Why Buy Nitrous Express from Black Ops Auto Works

Black Ops Auto Works stocks 1,892 Nitrous Express SKUs across kits, hardware, and fitting categories with real fitment data, competitive pricing, and support from staff who build these vehicles themselves. Products are filterable by year, make, model, trim, engine, and drivetrain to confirm the correct application before ordering.

For focused shopping, browse our Nitrous Components, Forced Induction, Engine, and Fuel Delivery collections for related upgrades.