-11%
Click to zoom in
This Aeromotive fuel filter or replacement element is designed to protect a performance fuel system while maintaining appropriate flow. Confirm micron rating, element material, housing compatibility, port size, installation position, and fuel type before ordering. Suitable prefilter with mechanical or electric pumps up to 12-GPM.
Key Features
- Micron rating and element media are selected for the intended position in the fuel system
- Housing, port, flow, service, and fuel requirements are model specific
- Suitable prefilter with mechanical or electric pumps up to 12-GPM.
- Exact manufacturer part number: 12662
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| Universal or specification-matched application. Verify every pressure, flow, fuel, port, electrical, dimensional, and system requirement. | |||
Specifications
| Brand | Aeromotive |
|---|---|
| Manufacturer Part Number | 12662 |
| Product Type | Fuel Filter Elements |
| Condition | New |
| Configuration | Extreme Flow 100 Micron Stainless Fuel Filter Element |
| Micron Rating | 100 |
| Flow Rating | 000 lb/hr |
| AN / ORB Size | AN-16 |
What's Included
One Aeromotive fuel filter element in the exact configuration and quantity identified by this listing. Additional fittings, hoses, filters, wiring, relays, regulators, brackets, seals, tuning, and hardware are included only when expressly stated.
About Aeromotive
Aeromotive engineers performance fuel pumps, regulators, filters, tanks, rails, fittings, and control hardware for correctly designed street, racing, and powersports fuel systems.
Important Disclosures
- Emissions use restrictions apply. Confirm the current manufacturer classification and all federal, state, and local requirements before purchase or installation.
- California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Related Parts
- Aeromotive A1000 Fuel Pump - EFI or Carbureted Applications
- Aeromotive 700 HP EFI Fuel Pump - Black
- Shop the complete Aeromotive collection
Frequently Asked Questions
Where should the Extreme Flow 100 Micron Stainless Fuel Filter Element be installed in the fuel system?
Placement depends on micron rating, element area, pump design, and Aeromotive's system diagram. Coarse pre-filters and fine post-filters serve different purposes.
Is the filter element cleanable or replaceable?
Service method depends on the exact element material. Inspect and service it using Aeromotive's current instructions, replacing damaged elements or seals.
Which fuels can be used with this filter?
Confirm compatibility for the housing, element, seals, and fittings. Gasoline compatibility does not automatically establish E85, methanol, or diesel compatibility.
Will a smaller micron rating restrict fuel flow?
Finer filtration can add restriction, especially when contaminated. Size the filter for required flow and monitor service intervals and pressure drop.
Installation Instructions
- Confirm Aeromotive part number 12662, the complete system design, fuel or fluid type, and all required supporting components.
- Relieve system pressure, disconnect electrical power, work in a ventilated area, and eliminate ignition sources before opening any fuel connection.
- Install with the exact port sizes, seals, mounting orientation, line support, filtration, wiring, and torque values in Aeromotive's current instructions.
- Prime and pressure-test the complete system; inspect every joint, seal, vent, and electrical connection for leaks, heat, abrasion, and voltage drop.
- Verify stable pressure and safe operation under load, then recheck fittings and mounting after the initial heat cycles.
Aeromotive
Aeromotive fuel-system components support properly engineered street, competition, powersports, and custom vehicle applications. Shop fuel pumps, pressure regulators, filters, tanks, rails, fittings, wiring, controllers, and service parts by exact manufacturer part number and verified system requirements. Choose by System Requirements Start with target power, fuel type, base pressure, boost pressure, required flow at operating pressure, system voltage, and expected duty cycle. Then verify whether the vehicle uses an EFI or carbureted system, return or returnless plumbing, in-tank or external mounting, and the correct filtration strategy. Do not size a pump from a free-flow rating or horsepower label alone. Fuel Pumps and Controllers Aeromotive offers in-tank, external, mechanical, brushless, and spur-gear pump configurations. Confirm the pump's current flow data at the pressure your engine will actually use. Plan wire gauge, fuse, relay or controller, grounds, filters, line sizes, t...
View Aeromotive Products
Engine
Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...
View Engine Products