-12%
Click to zoom in
This Aeromotive component is the Spring Steel Fuel Filter Bracket - 2-3/8in. Confirm its exact dimensions, interfaces, materials, and system compatibility before ordering. Use it only with the matching Aeromotive assembly or documented vehicle system. Can be used with the following Fuel Filters: 12361 , 12362 , 12363 , 12364
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| Universal or specification-matched application. Verify every pressure, flow, fuel, port, electrical, dimensional, and system requirement. | |||
Specifications
| Brand | Aeromotive |
|---|---|
| Manufacturer Part Number | 12704 |
| Product Type | Brackets |
| Condition | New |
| Configuration | Spring Steel Fuel Filter Bracket - 2-3/8in |
What's Included
One Aeromotive bracket in the exact configuration and quantity identified by this listing. Additional fittings, hoses, filters, wiring, relays, regulators, brackets, seals, tuning, and hardware are included only when expressly stated.
About Aeromotive
Aeromotive engineers performance fuel pumps, regulators, filters, tanks, rails, fittings, and control hardware for correctly designed street, racing, and powersports fuel systems.
Important Disclosures
- Emissions use restrictions apply. Confirm the current manufacturer classification and all federal, state, and local requirements before purchase or installation.
- California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Related Parts
- Aeromotive Heavy Duty Bracket 11105/11115 Fuel Pumps
- Aeromotive 2in Filter Bracket
- Shop the complete Aeromotive collection
Frequently Asked Questions
How do I confirm the Spring Steel Fuel Filter Bracket - 2-3/8in matches my system?
Match the exact dimensions, interfaces, operating range, materials, and manufacturer application for this part number.
Are supporting parts included?
Only items expressly listed for this exact configuration are included. Fittings, wiring, lines, seals, brackets, and hardware may be separate.
Is professional installation recommended?
Yes when the work affects fuel, pressurized fluid, electrical supply, calibration, or safety-critical mounting.
What should be tested before driving?
Inspect mounting and clearance, pressure- or leak-test the system, verify electrical operation where applicable, and correct every fault before use.
Installation Instructions
- Confirm Aeromotive part number 12704, the complete system design, fuel or fluid type, and all required supporting components.
- Compare every mounting point, dimension, interface, and included item before modifying the vehicle.
- Follow Aeromotive's current instructions and the vehicle service procedure for this exact component.
- Verify secure installation, safe clearance, and normal system operation before driving.
Aeromotive
Aeromotive fuel-system components support properly engineered street, competition, powersports, and custom vehicle applications. Shop fuel pumps, pressure regulators, filters, tanks, rails, fittings, wiring, controllers, and service parts by exact manufacturer part number and verified system requirements. Choose by System Requirements Start with target power, fuel type, base pressure, boost pressure, required flow at operating pressure, system voltage, and expected duty cycle. Then verify whether the vehicle uses an EFI or carbureted system, return or returnless plumbing, in-tank or external mounting, and the correct filtration strategy. Do not size a pump from a free-flow rating or horsepower label alone. Fuel Pumps and Controllers Aeromotive offers in-tank, external, mechanical, brushless, and spur-gear pump configurations. Confirm the pump's current flow data at the pressure your engine will actually use. Plan wire gauge, fuse, relay or controller, grounds, filters, line sizes, t...
View Aeromotive Products
Brackets
Brackets and mounting hardware for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop bumper mounting brackets, light bar and sensor relocation brackets, exhaust hanger kits, leaf spring and track bar brackets, caliper brackets, and roof rack mounting brackets for Ford, RAM, Chevrolet, Jeep, Subaru, and Toyota platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 472 bracket SKUs across bumper, suspension, exhaust, and accessory mounting categories. What This Category Covers Brackets are the mounting hardware that secures bumpers, light bars, sensors, exhaust systems, suspension components, and roof accessories to a vehicle chassis or body. Because brackets support such a wide range of systems, this collection spans multiple vehicle platforms and use cases rather than a single category, from off-road bumper hardware to exhaust hanger kits to suspen...
View Brackets Products
Fabrication
Shop automotive fabrication parts, tubing, fittings, hoses, clamps, and welding supplies at Black Ops Auto Works. Find components for custom exhaust routing, intake plumbing, fuel and oil lines, mounting solutions, and heat protection. Compare materials and hardware from Vibrant Performance, Stainless Bros, Ticon Industries, Radium Engineering, Mishimoto, Kooks, and other brands by exact dimensions and intended application. Stainless Steel, Aluminum, and Titanium Tubing Choose tubing, bends, and fabrication sections for your project’s routing and material requirements. This collection includes steel, aluminum, and titanium tubing categories, with selected T304 and SS321 stainless products. Compare outside diameter, wall thickness, straight length, bend angle, and centerline radius before planning cuts and joints. Explore the Stainless Bros collection for additional stainless tubing, mandrel bends, pie cuts, flanges, and exhaust fabrication components. Exhaust Flanges, Clamps, and Sl...
View Fabrication Products