-11%
APR 70mm T304 stainless steel slip clamp
APR 70mm slip clamp sleeve detail
APR stainless slip clamp open view
APR 70mm exhaust slip clamp side view
Click to zoom in
View vehicle applications

Description

Join 70mm exhaust sections without welding

APR EXH0183 is a low-profile T304 stainless slip clamp for connecting two 70mm or 2.75-inch exhaust pipes. The removable connection avoids welding or swaging and supports easier service when both pipe sections match the required outside diameter.

Key Features

  • T304 stainless steel construction
  • 70mm or 2.75-inch connection size
  • Low-profile slip-connection design
  • No welding or swaging required
  • Designed for installation and later removal
  • APR emissions code 5 because the clamp does not affect vehicle emissions

Application details and restrictions

Years / Scope Make Model / Component Requirement
Universal, dimension-based Two compatible exhaust pipes 70mm or 2.75-inch outside diameter Confirm pipe diameter, overlap, alignment, and clearance

This clamp has no year-make-model fitment. Both exhaust sections must be compatible with a 70mm slip connection, and the joint must have sufficient overlap and surrounding clearance.

Specifications

Detail Value
Manufacturer Part Number EXH0183
Product Type Exhaust slip clamp
Material T304 stainless steel
Connection Size 70mm or 2.75 inches
Clamp Style Slip clamp
Color Silver / natural
Emission Code 5
UPC 810009934288
California Proposition 65 Warning applies

What's Included

  • One 70mm T304 stainless steel slip clamp
  • Exhaust tubing, hangers, gaskets, and unrelated installation hardware are not included

About APR

APR develops performance hardware and software for Audi, Volkswagen, Porsche, and related platforms. Its application-specific components are engineered around verified vehicle, engine, transmission, and emissions requirements rather than model name alone.

Related Parts

  • No related store product is linked because supporting components must be verified for the exact vehicle, engine, transmission, and current APR configuration.

FAQ

What is the EXH0183?

It is exhaust clamp for the exact application and restrictions shown above.

What pipe size does it connect?

It is designed for compatible 70mm or 2.75-inch exhaust pipe sections.

Does installation require welding?

No. APR designed the slip clamp to connect compatible pipe sections without welding.

Does the pipe need to be swaged?

APR states that swaging is not required when the pipe sections match the intended slip connection.

Is it vehicle-specific?

No. Compatibility is determined by pipe outside diameter, overlap, alignment, and available clearance.

What material is used?

The clamp is made from T304 stainless steel.

Can the connection be removed later?

Yes. The low-profile clamp is intended to make installation and removal straightforward when the joint remains serviceable.

Are exhaust pipes included?

No. The package contains the clamp only.

Installation Instructions

  1. Measure both exhaust pipe sections and confirm a compatible 70mm or 2.75-inch slip connection.
  2. Clean the pipe surfaces and verify adequate overlap, alignment, and clearance from the body, wiring, hoses, and heat-sensitive components.
  3. Slide the clamp over the joint and center it across the overlapping pipe sections.
  4. Align the exhaust system without preload or contact, then tighten both clamp fasteners evenly using APR's current instructions.
  5. Start the vehicle in a ventilated area, check the joint for leaks and contact, and recheck clamp security after the initial heat cycle.

APR 70mm T304 Stainless Steel Slip Clamp

APR
APREXH0183
810009934288
Exhaust Hardware
88 Units In Stock
$ 53.94 $ 47.95
$ 47.95

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×