Click to zoom in
Engineered Off-Road Rear Protection Built for Jeep Wrangler TJ, JK, JL and Toyota FJ Cruiser
The ARB 5620010B Summit Rear Bumper is a purpose-built steel protection system designed to replace the factory rear bumper on a wide range of popular off-road platforms including the Jeep Wrangler TJ, JK, and JL as well as the Toyota FJ Cruiser. Built around a tubular steel subframe and finished in ARB's textured black powder coat, the 5620010B integrates a tow hitch, dual ARB and Hi-Lift jack points, and pre-wired provisions for an ARB air compressor, trailer camera, 50-amp Anderson plug, and trailer plug. Whether you are building a dedicated trail rig or a weekend overland setup, the Summit Rear Bumper delivers the recovery access, towing capability, and departure clearance that serious off-road use demands.
Key Features
- Tubular steel subframe construction for maximum strength and trail durability
- Integrated tow hitch maintains rear towing functionality with the new bumper in place
- Four ARB Jack and Hi-Lift jack points for rapid high-clearance recovery anywhere on the trail
- Pre-wired provisions for ARB air compressor and trailer camera connections
- 50-amp Anderson plug and trailer plug wiring provisions built into the bumper structure
- Textured black powder coat finish over zinc-rich primer for corrosion resistance
- Vehicle-specific design ensures optimized departure angles and ground clearance
- Suitable for vehicles without factory parking sensors
- Modular design allows tire carrier, jerry can holder, or blank cover panels to be fitted on each side (sold separately)
- ARB 3-year warranty
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 1997-2006 | Jeep | Wrangler TJ | Rubicon, Sahara, Sport, SE |
| 2007-2018 | Jeep | Wrangler JK | Rubicon, Sahara, Sport, X, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X |
| 2018-2023 | Jeep | Wrangler JL / JLU | Rubicon, Sahara, Sport, Sport S, Willys |
| 2007-2014 | Toyota | FJ Cruiser | Trail Teams Special Edition, TRD Special Edition |
| 2006-2009 | Hummer | H3 | See ARB compatibility guide |
Specifications
| Detail | Value |
|---|---|
| Brand | ARB |
| Part Number (MPN) | 5620010B |
| Construction | Tubular steel subframe |
| Finish | Textured black powder coat over zinc-rich primer |
| Integrated Tow Hitch | Yes |
| Jack Points | 4 (ARB Jack and Hi-Lift compatible) |
| Air Compressor Provision | Yes |
| Anderson Plug Wiring | 50-amp included |
| Trailer Plug Wiring | Yes |
| Trailer Camera Provision | Yes |
| Sensor Compatible | Suitable for vehicles without sensors |
| Side Options | Tire carrier, jerry can holder, or blank panels (sold separately) |
| Warranty | 3 Years |
| Prop 65 | Yes |
What's Included
- ARB 5620010B Summit Rear Bumper main bar assembly
- All necessary mounting hardware and chassis brackets
- Wiring provisions for ARB compressor, Anderson plug, trailer plug, and trailer camera
About ARB
ARB 4x4 Accessories has been designing and manufacturing premium off-road equipment in Australia since 1975. Every product in the ARB lineup is engineered for real-world performance under demanding conditions, backed by rigorous testing and a commitment to quality that has made ARB a trusted name in the global off-road community. ARB products are sold and supported through an extensive authorized dealer network in the United States.
Related Parts on Our Site
- Complete your build with the ARB 5620010 Summit Rear Bumper for 2007-2014 Toyota FJ Cruiser (US Spec)
FAQ
What is the 5620010B?The ARB 5620010B is the Summit Rear Bumper, a steel rear protection bar designed for the Jeep Wrangler TJ, JK, and JL platforms as well as the Toyota FJ Cruiser. It replaces the factory rear bumper and integrates a tow hitch, four jack points, and provisions for ARB compressor and trailer wiring.
Does the ARB 5620010B include a tire carrier?No. The 5620010B is the main rear bumper bar assembly only. Tire carriers, jerry can holders, and blank cover panels for the swing-out positions are sold separately and allow you to configure the setup for your specific needs.
Will the 5620010B fit my 2018-2023 Jeep Wrangler JL or JLU?Yes. The ARB 5620010B is confirmed to fit the Jeep Wrangler JL and JLU from 2018 onward, in addition to the earlier TJ and JK generations. Verify your specific year and trim against the ARB fitment guide before ordering.
Can I still tow with the ARB Summit Rear Bumper installed?Yes. The 5620010B includes an integrated tow hitch so your vehicle retains rear towing capability after installation. Trailer plug and 50-amp Anderson plug wiring provisions are built into the bumper structure.
Does the ARB 5620010B work with factory parking sensors?The 5620010B is noted as suitable for vehicles without factory parking sensors. If your vehicle has factory rear parking sensors, consult ARB or your authorized dealer regarding compatibility before ordering.
What jack types does the ARB 5620010B support?The 5620010B features four dedicated jack points compatible with both the ARB Jack and a standard Hi-Lift farm jack. These points are positioned for maximum structural strength and ease of trail recovery access.
What finish does the ARB 5620010B use?The bumper is finished in ARB's textured black powder coat applied over a zinc-rich primer for corrosion resistance. The finish is not suitable for color matching with factory paint.
Is the ARB 5620010B a direct bolt-on installation?The 5620010B uses the existing chassis attachment points on compatible vehicles. Professional installation is recommended, particularly for correct torqueing of all hardware and routing of the wiring provisions.
Installation Instructions
- Disconnect the vehicle battery before beginning any electrical connections.
- Remove the factory rear bumper and associated wiring connectors, setting aside hardware for reference.
- Position the ARB 5620010B assembly and align the chassis mounting brackets with the vehicle frame attachment points.
- Hand-thread all mounting hardware before torquing to ARB specifications in the included installation guide.
- Route and connect the wiring provisions for the ARB compressor, trailer plug, trailer camera, and 50-amp Anderson plug per the ARB wiring diagram.
- If fitting optional side accessories such as a tire carrier or jerry can holder, attach per their individual installation instructions before final torqueing of the main bar.
- Reconnect the vehicle battery and verify all electrical connections and trailer plug function.
- Perform a final torque check on all mounting hardware before returning the vehicle to service.
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
ARB
ARB parts and accessories for Jeep, Toyota Tacoma, 4Runner, Nissan Xterra, and other off-road trucks and SUVs are stocked at Black Ops Auto Works. Shop winch bars, front bumpers, skid plates, air lockers, on-board air compressors, tire inflation tools, recovery hitches, differential covers, and roof rack lighting for trail, overland, and 4x4 builds. Every product is filterable by year, make, model, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 718 ARB SKUs across bumpers, recovery, air systems, and off-road protection categories. What This Collection Covers ARB is an Australian 4x4 equipment manufacturer that builds winch bars, bumpers, skid plates, air lockers, and recovery gear engineered for serious off-road use rather than street or track applications. This collection groups ARB parts by the exact truck or SUV platform they were designed for so Jeep, Tacoma, 4Runner, and Xterra owners can shop their correct application. Platforms We Co...
View ARB Products
Bumpers - Steel
Steel bumpers for trucks and Jeeps are stocked at Black Ops Auto Works. Shop front winch bumpers, rear bumpers, brush guards, and Stealth Fighter and Spec Series steel bumpers for Ford F-150, Ford Super Duty, Ford Bronco, Chevrolet Silverado, GMC Sierra, RAM 1500, RAM 2500, RAM 3500, Toyota Tacoma, Toyota Tundra, Toyota Land Cruiser, and Jeep Wrangler platforms. Every product is filterable by year, make, model, and trim so the correct bumper ships the first time. Black Ops Auto Works carries 455 steel bumper SKUs across front winch bumpers, rear bumpers, and brush guards. What This Collection Covers Steel bumpers replace the factory plastic or lightweight bumper with a heavy-duty design built for off-road protection, winch mounting, and a more aggressive front or rear appearance. This collection spans front winch bumpers, rear bumpers, and standalone brush guards. Front Winch Bumpers Front winch bumpers add a winch mounting plate along with increased approach angle and brush pro...
View Bumpers - Steel Products
Bumpers, Grilles & Guards
Bumpers, grilles, and grille guards for trucks and Jeeps are stocked at Black Ops Auto Works. Shop front and rear bumpers, brush guards, grille inserts, and winch-ready bumper systems built for Chevrolet Silverado, GMC Sierra, Ford F-150, RAM 1500 and RAM TRX, Toyota Tacoma, and Jeep Wrangler and Gladiator. Every bumper and grille guard is filterable by year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 989 bumper, grille, and guard SKUs across steel and aluminum construction, winch-ready mounts, and integrated light bar provisions. What This Category Covers This category includes front bumpers, rear bumpers, grille guards, brush guards, and replacement grille inserts for trucks and Jeeps. Options range from lightly modified factory-style bumpers to full off-road bumpers built for winches, light bars, and trail protection. Front Bumpers Front bumper replacements add clearance for larger tires, integrate winch mounting plates, an...
View Bumpers, Grilles & Guards Products
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products