Click to zoom in
The Baja Designs 660119 S1 Headlight Lens Kit gives you a clear, Work/Scene beam pattern lens for your existing S1 auxiliary light pod. Built from hardcoated polycarbonate, this replacement and conversion lens installs directly onto any compatible S1 pod without tools and without voiding the host light warranty. Whether you are switching from a focused spot to a wide flood for close-range illumination or simply replacing a worn lens, the 660119 kit includes everything you need to complete the swap. The S1 light pod is sold separately.
Work/Scene Beam Pattern
The Work/Scene beam pattern casts a wide, short-throw flood of light that covers a broad horizontal area close to the vehicle. It is optimized for low-speed work environments, job sites, camp setups, and any situation where you need to see everything around you rather than far down the road.
- Work/Scene (this lens): Wide horizontal spread, short throw, maximum near-field coverage
- Spot: Tight, long-distance beam for high-speed trail or road use
- Driving: Broader than spot but more focused than Work/Scene, suited for moderate-speed driving use
Choosing the right beam pattern depends on your primary use case. Work/Scene is the go-to choice for anyone who needs wide, close-range lighting rather than distance projection.
S1 Lens Swap System
Baja Designs engineered the S1 pod with a user-swappable lens system. The lens is retained by the pod housing and sealed with the included O-ring, and no special tools are required to complete the exchange. Because the lens is a standalone accessory, swapping it does not affect the host light warranty. This means you can adapt your S1 pod to different tasks by keeping multiple lens kits on hand and switching them as your needs change.
What's Included
- 1 x Clear Work/Scene lens (hardcoated polycarbonate)
- 1 x O-ring (replacement seal)
S1 light pod not included. Sold individually as one lens kit.
Full Specifications
| Specification | Detail |
|---|---|
| Part Number (MPN) | 660119 |
| UPC | 810032000000 |
| Compatible Light | Baja Designs S1 series auxiliary light pods |
| Lens Material | Hardcoated polycarbonate |
| Lens Color | Clear |
| Beam Pattern | Work/Scene (wide flood, close-range) |
| Sold As | 1 lens kit (1 lens plus 1 O-ring) |
| Warranty | Limited Lifetime (lens swap does not void host light warranty) |
| Brand | Baja Designs |
About Baja Designs
Baja Designs is an American lighting manufacturer founded by off-road racers who needed lighting that could survive the rigors of desert racing. Every product is engineered and tested in real-world race and recreational conditions. The company is known for its focus on optical performance, thermal management, and durability across its full lineup of auxiliary lights, light bars, and accessories.
Proposition 65 Warning
WARNING: This product can expose you to chemicals including those known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
Frequently Asked Questions
What is the S1 light pod?
The S1 is a compact auxiliary light pod in the Baja Designs lineup, designed for tight mounting locations where a larger light bar or round pod would not fit. It accepts interchangeable lenses, including this 660119 Work/Scene kit, allowing the beam pattern to be changed without replacing the entire unit.
What is the difference between Work/Scene, Spot, and Driving beam patterns?
Work/Scene produces a wide, short-throw flood ideal for close-range tasks. Spot concentrates light into a narrow, long-distance beam suited for high-speed trail use. Driving falls between the two, offering moderate spread and throw for general forward illumination at varying speeds.
Is the S1 light pod included with part number 660119?
No. Part 660119 is a lens kit only. The S1 light pod is sold separately. This kit is intended for customers who already own an S1 pod and want to change or replace its lens.
What does the O-ring do?
The O-ring creates a weatherproof seal between the lens and the S1 pod housing. Including a fresh O-ring with the lens ensures the seal integrity is maintained after every swap.
Can I swap back to my original lens after installing the Work/Scene lens?
Yes. The lens swap system is designed to be reversible. As long as you retain your original lens and O-ring, you can reinstall it at any time.
Is part 660119 compatible with other Baja Designs light models?
No. This lens is designed specifically for the S1 pod. It is not interchangeable with lenses from Squadron, Squadron Sport, LP6, or other Baja Designs product families, which use different lens dimensions and retention systems.
Why is polycarbonate used instead of glass?
Polycarbonate is significantly more impact-resistant than glass, making it better suited for off-road environments where debris strikes are common. The hardcoat applied to the surface adds scratch resistance while maintaining optical clarity.
Does swapping the lens void the warranty on my S1 pod?
No. Baja Designs states that swapping the lens using this kit does not void the Limited Lifetime warranty on the host S1 light pod.
Do I need special tools to install the lens?
No special tools are required to complete the lens swap on an S1 pod.
Baja Designs
Baja Designs off-road LED lighting is stocked at Black Ops Auto Works for trucks, Jeeps, and off-road builds. Shop LED light bars, pod lights, Squadron and S1/S2 lights, XL and LP-Series lights, A-pillar kits, fog pocket kits, behind-the-grille kits, rock lights, lens kits, and wiring harnesses built for Ford Bronco, Ford Raptor, Ford F-150, Ford Super Duty, Toyota Tacoma, Toyota 4Runner, Toyota Tundra, Jeep Wrangler JL, Jeep Gladiator JT, RAM 2500, RAM 3500, RAM TRX, and Can-Am off-road platforms. Every product is filterable by year, make, model, trim, and mounting location so the correct light kit ships the first time. Black Ops Auto Works carries 704 Baja Designs SKUs across light bars, pods, A-pillar kits, fog pocket kits, and rock lights. What This Brand Covers Baja Designs builds race-proven LED lighting for trucks, Jeeps, SUVs, UTVs, and overland rigs that need real off-road visibility rather than a stock halogen glow. The lineup spans compact pod lights to full light bar...
View Baja Designs Products
Light Bars & Cubes
LED light bars and cube lights for trucks, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop light bars, cube lights, A-pillar kits, ditch light brackets, rock lights, and driving/combo lens kits from Baja Designs, Diode Dynamics, DV8 Offroad, ORACLE, and XKGlow built for Jeep Wrangler, Jeep Gladiator, Ford Bronco, Ford Raptor, Toyota Tundra, and Toyota Tacoma. Every product is filterable by year, make, model, trim, and mounting location so the correct light kit ships the first time. Black Ops Auto Works carries 1,086 light bar and cube light SKUs across pod lights, bar lights, A-pillar kits, and replacement lenses. What This Category Covers Light bars and cube lights add auxiliary illumination for off-road driving, work site lighting, and trail visibility beyond what factory headlights provide. This category ranges from compact rock lights that illuminate the underbody to full-width light bars mounted on a bumper or roof rack. Light Bar Styles Straight and cu...
View Light Bars & Cubes Products
Lighting
Vehicle-integrated automotive lighting for cars, trucks, SUVs, and performance builds is stocked at Black Ops Auto Works. Shop LED headlights, projector headlights, halo and DRL modules, tail lights, sequential turn signals, third brake lights, fog lights, sidemarkers, illuminated LED emblems, and replacement bulbs for Hellcat, Trackhawk, Charger, Challenger, Wrangler, F-150, BMW M cars, and import platforms. Every light is filterable by year, make, model, trim, and factory lighting type so the correct headlight, taillight, or bulb ships the first time. Black Ops Auto Works carries 4,030 vehicle-integrated lighting SKUs across headlights, taillights, and styling lighting. What This Collection Covers Lighting covers factory-location automotive lighting, the headlights, taillights, and turn signals that bolt directly into the vehicle body, as distinct from bolt-on off-road light bars and pods. The catalog spans LED and projector headlights, sequential taillights, halo and DRL upgr...
View Lighting Products
Lighting & Accessories
Off-road lighting and accessories for trucks, Jeeps, UTVs, and overland builds are stocked at Black Ops Auto Works. Shop LED light bars, light pods, cube lights, rock lights, whip lights, hitch lights, ditch light brackets, light bar mounts, wiring harnesses, controllers, and light covers for Wrangler, Gladiator, Bronco, F-150, Raptor, Tacoma, 4Runner, Silverado, RAM TRX, and UTV platforms. Every product is filterable by year, make, model, trim, and mounting location so the correct light and bracket ship the first time. Black Ops Auto Works carries 4,172 off-road lighting SKUs across light bars, pods, rock lights, and mounting hardware. What This Collection Covers Lighting & Accessories is built for off-road and overland lighting, not factory-style headlights or taillights. The catalog spans full-width LED light bars, compact pods and cubes, RGBW rock lights, flexible whip lights, hitch-mounted lighting, and every bracket, harness, and controller needed for a clean off-road ...
View Lighting & Accessories Products