COMP Cams GM Gen V LT4 Premium DOD Delete Kit

Find Cadillac CTS-V parts by generation, body and installed performance equipment. Exhaust, brake and chassis purchases should match the exact CTS-V application and current setup. Generation and Body Application Record engine, gearbox and sedan, coupe or wagon body where applicable. Different CTS-V generations require distinct induction, exhaust and service references. For an exhaust, compare body routing, mounting, valve requirements and outlets. Distinguish a complete system from an axle-back, mid-pipe or conversion component. Brake and Chassis Selection Choose friction parts by actual caliper, axle, pad shape and rotor material. A shared GM performance application needs exact manufacturer coverage. Suspension systems must account for the installed electronic equipment, axle loads and intended ride height. Review travel, wheel clearance and components retained by the kit. Choose Your Part Identify CTS-V generation, engine and body. Compare exhaust routing and installation scope. ...

Find Cadillac CTS parts by generation, engine and sedan, coupe or wagon body. Exterior protection and control accessories need exact production and interface coverage. Hood and Window Accessories Match hood protectors to actual front-end production and mounting. Window deflectors need exact body, door coverage and installation method. Compare the pieces supplied and follow the manufacturer’s instructions for the original window arrangement. A related CTS-V body or another generation should not be assumed compatible. Pedal Controls and Interior Fit Match pedal-response accessories to the actual accelerator connector and phone or display equipment. Response adjustment does not establish a verified engine-output gain. Floor mats need measured contours, retention and pedal clearance. For engine, brake and suspension parts, record the installed assemblies and distinguish standard CTS from CTS-V applications. Choose Your Part Identify generation, engine and body. Match hood and deflector...

Choose Cadillac CTS-V parts by generation, engine and the current powertrain build. Dampers, supercharger pulleys and injectors need a coordinated specification rather than independent size choices. Damper and Supercharger Drive For LSA or later engine applications, confirm exact damper, hub and pulley compatibility. Compare mounting, diameter, groove count, drive arrangement and kit contents. An overdrive percentage describes a drive configuration, not a guaranteed power result. Review belt, clearance, cooling, fueling and calibration requirements with the engine builder before combining components. Injector and Driveline Interfaces Injectors need exact fuel-system, connector, physical-length and flow-characterization coverage. Review the compatible engine management and calibration information for the intended fuel and setup. Clutch, gearbox and chassis parts also need actual generation and installed equipment. Keep component references for engine, supercharger and fuel-system cha...

Find Chevrolet Camaro parts by generation, engine, body and installed equipment. Compare exhaust sound and system scope first, then plan brake, chassis or drivetrain service around the actual assemblies on the car. Choose the Exhaust Scope and Sound AWE Camaro SS listings distinguish axle-back, cat-back and conversion components, with Touring or Track editions, resonated or non-resonated choices and different outlet or tip configurations. Match the exact generation, engine, body and rear valance before comparing sound. An axle-back and a cat-back replace different sections. A conversion kit requires a compatible starting exhaust; review the part number, supplied sections, valve requirements and installation instructions rather than treating it as a complete system. Match Brakes, Body and Drivetrain Equipment Brake pads and rotors must suit the installed caliper, axle and rotor dimensions. Factory performance packages or later conversions can change the service application. Compare c...

Find Chevrolet Corvette parts by generation, engine and installed equipment. C7 and C8 exhaust systems, brake options and electronic suspension need their own application checks before choosing an upgrade or service part. Exhaust Generation, Valves and Sound AWE listings distinguish C7 applications with AFM-related restrictions from separate C8 Stingray and Z06 systems. Match exact engine, generation and valve equipment, then compare Touring, Track or SwitchPath configuration using the specific system’s guidance. A conversion kit changes specified sections of a compatible existing exhaust. Review supplied valve hardware, retained factory components, outlet arrangement and installation instructions. A valve simulator is not itself a selectable exhaust valve. Brake, Suspension and Body Equipment Choose pads and rotors by installed caliper, axle, dimensions and rotor material. Record factory brake options and conversions, then compare compound guidance for the intended road or competit...

Shop COMP Cams camshafts, valve springs, retainers, lifters, rocker arms, pushrods, timing components, and engine tools by exact manufacturer part number and verified application. COMP Cams Camshafts Choose a camshaft around the complete engine combination and intended driving conditions. Confirm engine family, cylinder heads, induction, compression, operating range and the installed valvetrain before comparing profiles. Stage numbers or family names do not substitute for the actual cam specifications. The collection includes selected HEMI HRT camshaft listings alongside supporting valvetrain parts. A profile designated NSR should be evaluated using the manufacturer's application notes, existing component condition and exact installation requirements. Do not extend that designation to other camshafts or engine combinations. Lifters and Application-Specific Kits Compare hydraulic flat-tappet and hydraulic roller lifters for the specified application. The collection includes selected ...

Shop automotive engine parts, cooling-system components, oil-system upgrades, ignition parts, pulleys, sensors, gaskets, fuel components, and engine-bay accessories at Black Ops Auto Works. This collection covers vehicle-specific replacement parts, performance upgrades, supporting hardware, and universal components for street cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and motorsport applications. Engine Parts and Performance Components The Engine collection brings together components used throughout the engine, lubrication system, cooling system, ignition system, fuel system, crankcase ventilation, accessory drive, and engine compartment. Available products range from replacement sensors and gaskets to rotating-assembly parts, performance cooling systems, supercharger pulleys, catch cans, cylinder heads, camshafts, intake manifolds, and engine-bay dress-up components. Engine compatibility cannot be determined from vehicle model alone. Confirm the exact year, make, ...

Cylinder head components and engine internals for performance builds and OE service are stocked at Black Ops Auto Works. Shop complete cylinder heads, head gaskets, head stud and bolt kits, rocker arms, lifters, camshaft and lifter kits, rotating assemblies, and main stud and bolt kits for LS, LT, HEMI 5.7/6.1/6.4, Coyote, Cummins, Powerstroke, VW/Audi turbo, Subaru, Nissan, and import platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 972 Head Components SKUs across component type, engine platform, and bore or gasket specification. What This Collection Covers Head Components groups together the parts that live at and around the cylinder head, the area of the engine most affected by heat, combustion pressure, and clamping load. This includes complete heads, head gaskets, head studs and bolts, rocker arms, lifters, camshaft and lifter kits, main stud and bolt kits, and ro...