DFC Active Performance Front Brake Pads and Hardware Kit for Acura ILX and Honda Applications

Confident Front Braking for Acura and Honda Applications, 1115-0914-01

This DFC Active Performance front brake pad and hardware kit is identified by 1115-0914-01 and is designed for the listed Acura ILX and Honda applications. The compound is intended for spirited street driving, performance driving, and track use, with strong initial bite, high friction, low compressibility, fade resistance, and consistent pedal control.

Key Features

• High friction performance with a verified coefficient range of 0.40µ to 0.68µ
• Strong initial bite with consistent modulation and threshold control
• High resistance to brake fade during elevated temperature operation
• Low compressibility for a firm and responsive pedal feel
• Post cured and scorched to reduce bedding time, with chamfered and slotted treatment where applicable
• DFC Premium Rubber Steel Rubber shims for controlled noise and vibration management
• Front axle application with a hardware kit included

Fitment

Specifications

What's Included

• Front brake pads identified by 1115-0914-01
• Hardware kit

About DFC

DFC develops aftermarket brake components for street and performance applications. Its Active Performance line is engineered for strong friction response, consistent modulation, low compressibility, and resistance to fade during demanding use.

FAQ

It is the manufacturer part number for this front brake pad and hardware kit. Use the vehicle table and the service information for the vehicle before ordering.

It fits the Acura ILX and the listed Honda Accord, Civic, CR-V, CR-Z, Element, and Fit applications. Match the year and trim exactly before purchase.

No. Compatibility is limited to the years and trims shown in the fitment table. Brake position and vehicle configuration must also match the listed application.

The package includes the front brake pads and a hardware kit. No other components are identified for this exact package.

They are for the front axle. Confirm the vehicle service position before installation because rear brake components are different.

Brake work should be completed by a qualified technician using the vehicle service procedure. The technician should inspect the braking system and follow the required torque and safety steps.

Confirm the year, make, model, trim, axle position, and the physical shape of the replacement parts. Inspect the rotors, calipers, guides, and related hardware before reassembly.

The stated operating range is minus 30°F through 1200°F. Actual results depend on vehicle setup, brake condition, driving conditions, and correct bedding.

DFC provides a limited warranty for defects in material and workmanship for 12 months or 12,000 miles, whichever comes first. The warranty is for the original purchaser and excludes normal wear, improper installation, misuse, accidents, and racing or track use.

The Active Performance line is intended for spirited street driving, performance driving, and track use. The DFC warranty excludes racing and track use, so review the warranty terms before that type of use.

Installation Instructions

1. Confirm the vehicle year, make, model, trim, front position, and 1115-0914-01 before beginning work.
2. Have a qualified technician raise and support the vehicle according to the vehicle service procedure, then remove the wheel and access the front brake assembly.
3. Inspect the rotor, caliper, guides, piston, and mounting surfaces. Correct worn or damaged components before fitting the new pads.
4. Compare the new pads and hardware with the removed parts to confirm shape, position, and contact surfaces.
5. Install the hardware kit and brake pads according to the vehicle service procedure. Keep friction surfaces clean and follow all specified torque values.
6. Reassemble the wheel, restore the vehicle, and confirm the brake pedal is firm before moving the vehicle.
7. Perform a controlled bedding procedure in a safe area using gradual stops, then allow the brakes to cool as required by the technician and vehicle procedure.

Prop 65 Warning

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.