DFC Active Performance Front Brake Pads and Hardware Kit for BMW 1 Series M, 5 Series, 6 Series, 7 Series and M3

DFC Active Performance front brake pads for BMW applications, part 1115-0918-01

The DFC Active Performance front brake pad and hardware kit, identified by manufacturer part number 1115-0918-01, is designed for the listed BMW cars. It delivers strong initial bite, high torque, controlled pedal modulation, and resistance to brake fade for spirited street driving and track use.

Key Features

• Performance oriented friction material provides high friction and low compressibility for a firm pedal response.
• Strong initial bite, high torque, and controlled modulation support confident braking.
• High resistance to brake fade supports repeated braking at elevated operating temperatures.
• Post cured and scorched pads reduce uncured bonding agents and shorten initial break in.
• Positive mold construction supports consistent friction material density across the pad set.
• Part number 1115-0918-01 is application specific to the BMW vehicles listed below.

Fitment

Specifications

What's Included

• One front axle set of DFC Active Performance brake pads.
• One application hardware kit.

About DFC

DFC develops brake products for foreign and domestic vehicles. Its Active Performance line is designed for performance enthusiasts, spirited street drivers, and track racers who need high friction, low compressibility, fade resistance, and controlled modulation. For this BMW application, DFC identifies the kit as 1115-0918-01.

FAQ

It is a DFC Active Performance front brake pad and hardware kit for the BMW applications in the fitment table.

It is listed for selected 1 Series M, 5 Series, 6 Series, 7 Series, and M3 applications. Match the exact year, model, and submodel in the table before ordering.

This kit is for the front position only. It is not a rear axle application.

No. Compatibility is limited to the exact year, model, and submodel rows shown in the fitment table. Do not infer compatibility for unlisted applications.

The package includes one front axle set of brake pads and one application hardware kit.

Brake service requires correct caliper handling, hardware installation, torque procedures, and post service checks. Use a qualified technician if you do not have the required tools and experience.

Follow the vehicle manufacturer and installer guidance for bedding new pads. Avoid severe braking until the friction surfaces have been properly conditioned, and inspect pedal feel after installation.

DFC provides a limited warranty for 12 months or 12,000 miles, whichever comes first, for the original purchaser. Coverage requires proper professional installation and normal street use, and excludes normal wear, noise, vibration, dust, misuse, racing, track use, accidents, and improper installation.

The Active Performance line is intended for spirited street driving and track use. Confirm that the vehicle setup and driving conditions are appropriate for the application before installation.

Installation Instructions

1. Confirm the vehicle year, model, submodel, and front position against the fitment table. Confirm the package label matches 1115-0918-01.
2. Have a qualified technician secure the vehicle on a level surface, remove the wheel, and follow the vehicle service procedure for caliper access.
3. Remove the existing front pads and hardware, then inspect the rotor, caliper, guide pins, piston, hoses, and mounting surfaces for wear or damage.
4. Clean the mounting surfaces and install the supplied application hardware kit. Confirm each pad is seated correctly in its intended position.
5. Reinstall the caliper and wheel, then torque all fasteners and wheel hardware to the vehicle manufacturer specifications.
6. Press the brake pedal until firm, verify the fluid level, and check the assembly for leaks or interference before moving the vehicle.
7. Perform the bedding procedure recommended by the vehicle manufacturer or qualified installer, then recheck pedal feel and hardware torque after the initial drive.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Prop 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.