Click to zoom in
Responsive Front Braking for Honda Civic and Insight Applications
DFC Active Performance front brake pads and hardware kit 1115-1578-01 fits the verified Honda Civic and Honda Insight applications listed below. The high friction formulation is designed for a strong initial bite, responsive pedal feel, predictable control, and resistance to brake fade during spirited street driving.
Key Features
- High friction formulation supports responsive braking and pedal control
- Low compressibility supports a firm and consistent pedal feel
- Extremely high torque and aggressive initial bite support quick response
- High resistance to brake fade supports repeated braking at elevated temperatures
- Friction stability and consistency support predictable braking behavior
- Outstanding modulation, threshold control, and release characteristics support precise braking input
- Active Performance line is intended for spirited street driving
- Front brake application for the Honda Civic and Honda Insight fitments listed below
- Part number 1115-1578-01 identifies this front Active Performance application
Fitment
| Year Range | Make | Model | Submodel | Position |
|---|---|---|---|---|
| 2001 to 2012 | Honda | Civic | DX | Front |
| 1996 to 2012 | Honda | Civic | EX | Front |
| 2009 to 2012 | Honda | Civic | EX-L | Front |
| 2001 to 2005 | Honda | Civic | GX | Front |
| 2012 to 2015 | Honda | Civic | HF | Front |
| 2001 to 2005 | Honda | Civic | HX | Front |
| 1996, 2001 to 2015 | Honda | Civic | LX | Front |
| 2009 to 2011 | Honda | Civic | LX-S | Front |
| 1999 to 2000, 2002 to 2003 | Honda | Civic | Si | Front |
| 2011 to 2014 | Honda | Insight | Base | Front |
| 2010 to 2014 | Honda | Insight | EX | Front |
| 2010 to 2014 | Honda | Insight | LX | Front |
Confirm the vehicle year, make, model, submodel, and front brake configuration before ordering. Use 1115-1578-01 for application identification and parts comparison.
Specifications
| Detail | Value |
|---|---|
| Brand | DFC |
| Product type | Active Performance front brake pads and hardware kit |
| Manufacturer part number | 1115-1578-01 |
| UPC | 190920069369 |
| Application position | Front |
| Application vehicles | Selected Honda Civic and Honda Insight applications |
| Friction formulation | High friction formulation |
| Compressibility | Low compressibility |
| Performance characteristics | High torque, aggressive initial bite, fade resistance, friction stability, modulation, threshold control, and release |
| Package dimensions | 3.30 inches wide, 3.30 inches high, and 6.70 inches deep |
| Condition | New |
What's Included
- DFC Active Performance front brake pads
About DFC
DFC develops automotive brake products for foreign and domestic vehicles. The Active Performance line uses a high friction formulation for spirited street driving, with low compressibility, strong torque, fade resistance, stable friction behavior, and controlled modulation. The line is intended for drivers who want more responsive braking without changing the verified vehicle application.
FAQ
What is the 1115-1578-01?It is a DFC Active Performance front brake pad and hardware kit for the Honda Civic and Honda Insight applications listed in the fitment table.
Which Honda vehicles fit this kit?It fits the listed Honda Civic and Honda Insight years and submodels. Match the exact vehicle configuration with the fitment table before ordering.
Which brake position does this kit serve?This kit is for the front position. It is not a rear axle application.
What friction formulation does the product use?The Active Performance line uses a high friction formulation with low compressibility, strong torque, and stable braking characteristics.
What does the package contain?The package contains DFC Active Performance front brake pads.
What is the UPC for this product?The UPC is 190920069369. Use the UPC with the vehicle fitment and product details when comparing listings.
Is the product intended for daily driving?The Active Performance line is intended for spirited street driving and supports strong initial bite, pedal response, modulation, and fade resistance.
Can the fitment be used for a rear brake replacement?No. The verified application is for the front position. A rear replacement requires a product matched to the rear brake configuration.
What should I confirm before ordering?Confirm the vehicle year, make, model, submodel, front position, and existing brake configuration. Compare the replacement parts with the parts being removed.
What warranty applies to the brake products?DFC provides a limited warranty against defects in materials and workmanship for 12 months or 12,000 miles, whichever occurs first from original purchase. It applies to the original purchaser when professionally installed, used for normal street driving, and maintained as specified. Normal wear, noise, vibration, dust, improper installation, misuse, racing, track use, off road use, and modified applications are excluded. Refunds and labor reimbursement are not covered.
Installation Instructions
- Confirm the vehicle year, make, model, submodel, front position, and application for 1115-1578-01.
- Review the vehicle service manual and prepare approved support stands, suitable tools, eye protection, brake cleaner, and high temperature brake grease.
- Park on a stable surface, secure the vehicle, loosen the wheel fasteners, and support the vehicle according to the service manual.
- Remove the front wheel and secure the brake rotor if the service procedure requires it.
- Open the brake master cylinder reservoir cap and monitor the fluid level while retracting the caliper piston.
- Remove the caliper retaining hardware and move the caliper clear without straining the brake hose.
- Remove the old pads and inspect the shims, springs, clips, piston boot, sliding components, and caliper hardware for damage or contamination.
- Clean approved contact areas. Install the replacement pads and use hardware specified for the application in the correct position. Apply brake grease only to approved pad contact areas.
- Reinstall the caliper and tighten the fasteners to the vehicle manufacturer specifications. Confirm that sliding components and boots are seated correctly.
- Reinstall the wheel and tighten the wheel fasteners to the vehicle manufacturer specifications.
- Press the brake pedal several times until a firm pedal is established. Check the fluid level and inspect for leaks before moving the vehicle.
- In a safe, flat area, complete the recommended bedding procedure. Test braking at low speed before returning to normal driving.
- Recheck braking operation, wheel rotation, and fluid level after the first drive. Follow the service manual for final inspection and maintenance.
Prop 65 Warning
California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer or reproductive harm.
Brake Pads
Brake pads and brake shoes for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop ceramic pads, semi-metallic pads, full metallic and racing compounds, low-dust street pads, big brake kit pads, OE-replacement pads, and drum brake shoes for HEMI, Hellcat, Trackhawk, Redeye, Demon, Scat Pack, RAM TRX, LS, LT, Coyote, EcoBoost, and import platforms. Every pad set is filterable by year, make, model, trim, and caliper type (OE floating caliper, Brembo fixed caliper, big brake kit caliper) so the correct compound and shape ships the first time. Black Ops Auto Works carries 4,351 brake pad and brake shoe SKUs across street, sport, and track compounds. What This Category Covers Brake pads are the most frequently replaced brake component and the single highest-value brake upgrade for most drivers. Swapping stock pads for a quality ceramic or semi-metallic compound produces an immediate improvement in stopping distance, pedal feel, and fade resistance wit...
View Brake Pads Products
Brake Pads - Performance
Performance brake pads for daily-driven sport cars, sport trucks, tow rigs, and occasional track-day builds are stocked at Black Ops Auto Works. Shop ceramic performance pads, semi-metallic performance pads, street-track dual-purpose pads, and extra-duty compounds for Hellcat, Trackhawk, HEMI, Coyote, LS, LT, and import platforms. Every product is filterable by year, make, model, trim, and factory brake package so the correct pad ships the first time. Black Ops Auto Works carries 2,777 performance brake pad SKUs across ceramic, semi-metallic, street-track, and extra-duty categories. What This Collection Covers Performance brake pads sit between the OE-comfort tier (quietest, longest life, lowest bite) and the racing tier (highest bite, shortest life). This collection is the correct starting point for enthusiast street builds, sport trucks, and occasional track use. Pad Categories Street performance pads, street-track pads, high-friction ceramic pads, semi-metallic performance pa...
View Brake Pads - Performance Products
Brakes
Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...
View Brakes Products