DFC Active Performance Front Brake Pads and Hardware Kit for Scion FR-S, Subaru BRZ, Toyota 86 and GR86

Confident Front Braking Across Verified Applications

The 1115-1539-01 front brake pad and hardware kit brings DFC Active Performance friction response to verified Scion FR-S, Subaru BRZ, Subaru Crosstrek, Subaru Forester, Subaru Impreza, Subaru Legacy, Subaru Outback, Toyota 86 and Toyota GR86 applications. The high friction formulation is intended for spirited street driving and supports pedal response, control, and repeatable braking.

Key Features

• High friction formulation for spirited street driving
• High friction coefficient and low compressibility for responsive pedal feel
• High torque response with aggressive initial bite
• Fade resistance for consistent braking at elevated operating temperatures
• Friction stability and consistency for repeatable brake control
• Modulation, threshold, and release characteristics designed for controlled braking
• Front position application with an application specific hardware kit
• Exact manufacturer part number 1115-1539-01

Fitment

The 1115-1539-01 application is for the front position only. Match the vehicle year, model, submodel, and brake configuration before ordering.

Specifications

What's Included

• One front axle set of DFC Active Performance brake pads
• Application specific mounting hardware kit

About DFC

DFC develops automotive brake products for foreign and domestic vehicles. The Active Performance line is intended for high performance enthusiasts, spirited street drivers, and serious track racers who want high torque friction response, pedal control, and fade resistance.

FAQ

It is a DFC Active Performance front brake pad and hardware kit for the verified applications in the fitment table.

It fits the Scion FR-S, Subaru BRZ, Subaru Crosstrek, Subaru Forester, Subaru Impreza, Subaru Legacy, Subaru Outback, Toyota 86, and Toyota GR86 applications listed in the fitment table.

This kit is for the front axle position only.

The package includes one front axle set of Active Performance brake pads and an application specific mounting hardware kit.

It uses a high friction formulation intended to provide strong initial bite, pedal response, and stable braking control.

No. It is vehicle specific and should be ordered only for a listed year, make, model, and submodel.

The listed package dimensions are 3.50 inches wide, 3.30 inches high, and 8.50 inches deep.

Yes. California Proposition 65 warning applies to this product. Review the warning provided with the product before use.

Confirm the application, front position, pad shape, and brake configuration against the vehicle service information before beginning work.

Installation Instructions

1. Confirm the vehicle application and the 1115-1539-01 front position before disassembly.
2. Park on a level surface, engage the parking brake, and support the vehicle securely with approved stands.
3. Remove the wheel and inspect the caliper, rotor, hoses, and surrounding hardware for damage or abnormal wear.
4. Remove the caliper retaining hardware and support the caliper without stretching the brake hose.
5. Remove the used pads and compare the replacement pad shape and hardware with the removed parts.
6. Clean the pad contact points and hardware seating areas with an approved brake cleaner.
7. Install the supplied application specific hardware and position the new pads in the correct front axle locations.
8. Reinstall the caliper and tighten all fasteners to the vehicle manufacturer's specified torque.
9. Reinstall the wheel, lower the vehicle, and pump the brake pedal until firm before moving the vehicle.
10. Bed the pads according to the vehicle and brake system service guidance, then check for proper operation at low speed.

Prop 65 Warning

California Proposition 65 warning applies to this product. Review the warning provided with the product before use.