Click to zoom in
Say Goodbye to the Awkward Factory Hood Prop
The GrimmSpeed High Lift Hood Struts for the 2013 and newer Subaru BRZ and 2013 and newer Scion FR-S eliminate the annoying factory hood prop rod that always seems to be in the way. Developed in close collaboration with FT86Club.com members, GRM097001 delivers over 6 inches of additional lift compared to the stock prop rod position, giving you far more light and room to work in the engine bay. The struts are perfectly balanced, so lifting the hood halfway leaves it resting in a generous neutral zone, ideal for showing off your FA20 engine bay at a car show. A quick flick of the wrist brings the hood to full open, and gently pulling down below the neutral zone lets it close smoothly without any risk of scratches or dents from pushing the hood shut.
Key Features
- Gains over 6 inches of additional lift versus the OEM prop rod
- Perfectly balanced for a clean neutral hold at any point in travel
- Eliminates the factory hood prop and its risk of accidental drops
- Quick release ball and socket mounting hardware
- Clear zinc plated grade 8.8 hardware included
- Manufactured in the USA
Fitment Table
| Year Range | Make | Model |
|---|---|---|
| 2013-2020 | Subaru | BRZ |
| 2013-2016 | Scion | FR-S |
Specifications
| Detail | Value |
|---|---|
| Brand | GrimmSpeed |
| MPN | GRM097001 |
| Hardware Finish | Clear Zinc Plated Grade 8.8 |
| Country of Manufacture | USA |
| UPC | Not published by manufacturer |
What's Included
- 2 GrimmSpeed high lift hood struts
- Mounting brackets
- Quick release hardware
About GrimmSpeed
GrimmSpeed is a Seattle based performance manufacturer that designs and builds parts specifically for the Subaru and import performance community. Every part is engineered, tested, and produced with a focus on real world durability, easy installation, and measurable performance gains, making GrimmSpeed a trusted name among BRZ and FR-S owners nationwide.
FAQ
What is the GRM097001?The GRM097001 is a set of GrimmSpeed High Lift Hood Struts for the 2013 and newer Subaru BRZ and 2013 to 2016 Scion FR-S.
How much extra lift does GRM097001 provide?GRM097001 provides more than 6 inches of additional lift compared to the factory hood prop rod position.
Does GRM097001 fit the Toyota 86?GRM097001 is built for the shared FA20 platform, so it also fits the corresponding Toyota 86 and GT86 model years using the same hood hinge design.
Will GRM097001 hold my hood at any position?Yes, GRM097001 is balanced to hold the hood in a wide neutral zone as well as at full open.
Does installing GRM097001 require any cutting?No, GRM097001 uses the factory mounting points and does not require cutting or drilling.
What hardware finish does GRM097001 use?GRM097001 includes clear zinc plated grade 8.8 hardware for corrosion resistance and strength.
Is GRM097001 easy to install at home?Yes, GRM097001 typically takes about 30 minutes to install using basic hand tools.
Where is GRM097001 manufactured?GRM097001 struts are manufactured in the USA.
Install Instructions
- Support the hood by hand and remove the factory prop rod.
- Remove the top hinge bolt with a 12mm ratchet.
- Position the lower bracket and reinstall the bolt, then tighten with a 13mm ratchet.
- Slip the upper bracket tab into place and secure with the provided bolt.
- Tighten the upper bracket bolt with a 10mm wrench.
- Repeat the process on the opposite side.
- Cycle the hood through its full range of motion to confirm both GRM097001 struts operate smoothly.
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products
Hood Struts
Hood strut kits replace a prop rod or add controlled gas spring support for easier engine bay access. Shop direct fit hood struts and dampers for Subaru WRX and STI, BRZ and GR86, Volkswagen Golf GTI, Ford Bronco, Jeep Wrangler, Honda S2000 and Nissan platforms. Black Ops Auto Works carries 29 hood strut SKUs across vehicle specific gas spring kits, hood dampers, hinge hardware, high lift supports and replacement gas springs. Filter by year, make, model, trim and hood material before ordering. What Hood Strut Kits Cover Hands Free Hood Support Hood struts use gas springs and vehicle specific brackets to hold the hood open without a prop rod. The correct kit is designed for the vehicle mounting points and the weight of the factory or specified hood. Fitment by Hood Weight Use the Intended Hood Type Most kits are designed around an original equipment steel or aluminum hood. Carbon fiber and other lightweight hoods can need lower force dampers, while heavier hoods may require a kit...
View Hood Struts Products
Hoods & Components
Hoods and hood components for Jeep Grand Cherokee Trackhawk, Dodge Charger and Challenger Hellcat and Demon, Durango SRT, Ram TRX, Chrysler 300, and Mustang and Camaro platforms are stocked at Black Ops Auto Works. Shop carbon fiber hoods, fiberglass hoods, OEM style replacement hoods, hood vents, hood scoops, hood pins, and hood struts built for HEMI, Hellcat, and supercharged applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 619 Hoods & Components SKUs across hood shell, vent, pin, and strut categories. What This Category Covers The Hoods & Components category groups together every part needed to replace, upgrade, or dress up a hood. Coverage spans full carbon fiber and fiberglass hood shells with styles like Demon, Sniper, Venom, and Redeye, OEM style Hellcat replacement hoods, functional and cosmetic hood vents, billet hood pin kits, and gas strut lift su...
View Hoods & Components Products