H&R 14-18 Volkswagen Jetta S/SE/SEL/TDI/GLI MK6 Sport Cup Kit

Street Performance Suspension Upgrade That Transforms the VW Jetta MK6 Stance and Handling

The H&R HRS31043-1 Sport Cup Kit combines H&R's performance sport springs with OEM-quality monotube shock absorbers specifically valved for the lowered spring rates. Designed for the 2014-2018 Volkswagen Jetta MK6 including S, SE, SEL, TDI, and GLI variants, the HRS31043-1 delivers approximately 1.6 inches of front lowering and 1.5 inches of rear lowering over stock. The progressive spring rate design improves cornering precision and body roll control without sacrificing the ride compliance needed for daily street driving.

Key Features

• Complete Sport Cup Kit: matched springs and shocks for the 2014-2018 VW Jetta MK6
• Approximately 1.6-inch front and 1.5-inch rear lowering over stock
• Progressive spring rate design balances performance and daily ride comfort
• OEM-quality monotube shock absorbers valved specifically for lowered spring rates
• Lower center of gravity improves cornering response and reduces body roll
• Direct bolt-on installation, no modifications or cutting required
• Compatible with S, SE, SEL, TDI, and GLI trim levels
• Engineered in Germany by H&R Special Springs
• Backed by H&R's limited lifetime warranty on springs

Fitment

Specifications

What's Included

• 2x H&R front sport springs
• 2x H&R rear sport springs
• 2x front monotube shock absorbers
• 2x rear monotube shock absorbers

About H&R Special Springs

H&R Special Springs has been designing and manufacturing premium suspension components in Lennestadt, Germany since 1984. Their springs are manufactured from high-grade chromium silicon steel wire, cold-wound and shot-peened for maximum fatigue resistance, and coated against corrosion. H&R Sport Cup Kits are developed on European proving grounds and engineered to maintain proper suspension geometry and bump stop clearance throughout the lowered ride height range.

Frequently Asked Questions

The HRS31043-1 provides approximately 1.6 inches of front lowering and 1.5 inches of rear lowering on the 2014-2018 Volkswagen Jetta MK6. H&R notes that actual lowering can vary based on vehicle configuration, options weight, and current suspension condition.

Yes. The Sport Cup Kit includes everything: front and rear sport springs plus front and rear monotube shock absorbers. The shocks are specifically valved by H&R for the stiffer progressive spring rates, ensuring the suspension system performs as a matched unit.

Yes. The HRS31043-1 is compatible with the 2014-2018 Volkswagen Jetta MK6 in S, SE, SEL, TDI, and GLI configurations. The kit is designed around the MK6 platform's front-wheel-drive suspension architecture common to all these trims.

Yes. A full four-wheel alignment is required after installing any suspension kit that changes ride height. Lowering the vehicle shifts camber, toe, and caster from their factory settings, and driving without an alignment will accelerate tire wear and may affect handling predictability.

A professional shop with proper spring compressor equipment typically completes a Sport Cup Kit installation in 3-4 hours for the Jetta MK6. Home installation is possible for experienced mechanics, but proper spring compressor and torque equipment is essential for safety.

The progressive spring rate design minimizes the ride quality penalty associated with performance lowering springs. For most drivers, the HRS31043-1 provides a noticeably sportier feel than stock while remaining comfortable for daily driving. The ride is firmer than stock but not harsh, and the reduced body roll improves driver confidence.

Yes, with standard precautions. After lowering, confirm adequate clearance between the tire sidewall and strut/wheel well at full lock and full compression. Most 17-18-inch aftermarket wheels with appropriate offset fit without issue, but always verify before installing.

H&R provides a limited lifetime warranty on their springs against defects in materials and workmanship. The shock absorbers are covered separately. Contact H&R or your authorized dealer for complete warranty terms applicable to the HRS31043-1 Sport Cup Kit.

Installation Overview

1. Safely lift and support the vehicle, remove all four wheels
2. Remove front strut assemblies from the vehicle (unbolt from knuckle and top mount)
3. Use a spring compressor to compress the front springs safely, remove strut top nut, and swap springs onto the new H&R shocks
4. Reassemble front strut with H&R sport spring, install into vehicle, torque all fasteners to factory specification
5. Remove rear shock absorbers and springs, install H&R rear springs and shocks
6. Reinstall all wheels, lower the vehicle to the ground
7. Allow the suspension to settle under vehicle weight before final inspection
8. Schedule a four-wheel alignment before driving

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.