-9%
Click to zoom in
Precision Machined Adapter Solution for Mounting Kooks Headers to Small Block Ford Engines
The 7010-KIT is a small block Ford adapter plate kit designed specifically for use with Kooks headers on small block Ford powered vehicles. When swapping a small block Ford into a chassis that was not originally engineered around that engine, or when fitting Kooks headers in applications where the standard mounting bolt pattern creates interference or alignment issues, the 7010-KIT provides the precision machined adapter solution that makes a clean, leak free installation possible. Kooks produces this kit to the same dimensional tolerances as their header flanges, ensuring a proper mating surface that will not warp or leak under repeated heat cycles.
The kit contains everything needed to adapt Kooks small block Ford headers to the intended application without cutting, drilling, or fabricating custom solutions. Using the correct adapter plate preserves the integrity of the header flange surface and ensures the gasket sits flat for a permanent seal. This is the kind of detail hardware that separates a professional exhaust installation from one that develops leaks and loose connections over time. If you are running Kooks headers on a small block Ford and need the proper adapter hardware, this adapter kit is the purpose specific solution from the header manufacturer itself.
Key Features
- Purpose built adapter plate kit for small block Ford applications with Kooks headers
- Precision machined to Kooks dimensional tolerances
- Ensures proper alignment and a leak free flange mating surface
- Eliminates the need for custom fabrication or improvised adapters
- Designed by Kooks for use with Kooks small block Ford header products
- Complete kit with all required hardware included
What's Included
- Small block Ford adapter plates
- All required mounting hardware
Specifications
| Specification | Detail |
|---|---|
| Part Number (MPN) | 7010-KIT |
| UPC | Contact us for UPC |
| Application | Small Block Ford with Kooks Headers |
| Fitment | Universal (Kooks SBF Header Applications) |
| Kit Contents | Adapter plates and mounting hardware |
Frequently Asked Questions
What is this kit used for?
This kit is an adapter plate kit that allows Kooks headers to be properly mounted in small block Ford applications where the standard flange location requires an adapter for correct alignment or clearance.
Is this kit required for all small block Ford Kooks headers?
No. This kit is intended for specific installations where an adapter plate is needed. Your particular application will determine whether this adapter kit is necessary. Refer to your Kooks header instructions or contact Kooks technical support for guidance.
What hardware is included in this kit?
The kit includes the adapter plates and all required mounting hardware. Contact us if you need a detailed parts manifest for your application.
Will this kit work with headers from other manufacturers?
This kit is engineered specifically to match Kooks header flange dimensions and bolt patterns. It is not guaranteed to be compatible with headers from other manufacturers.
Is special machining required to use this kit?
No. The adapter plates are precision machined by Kooks and are ready to install without additional machining or modification.
Can this kit be reused if I remove my headers?
Yes. The adapter plates are a durable machined component. As long as they are not damaged during removal, they can be reused when reinstalling the same or compatible Kooks headers.
Does this kit include gaskets?
This kit focuses on the adapter plates and mounting hardware. Exhaust gaskets appropriate for your small block Ford application should be sourced separately from the Kooks gasket lineup.
Is this kit made in the USA?
Kooks manufactures their header and accessory products in the USA. Confirm with your retailer for the most current production details on this specific kit.
Where do I mount the adapter plates?
The adapter plates mount between the Kooks header flange and the engine cylinder head, providing the correct alignment and spacing for your specific small block Ford installation.
Do I need a gasket between the adapter plate and the head?
Yes. Use an appropriate exhaust manifold or header gasket between the adapter plate and cylinder head surface to ensure a proper seal. Consult Kooks for the recommended gasket specification for your engine.
Installation Instructions
- Confirm this kit is the correct adapter for your specific Kooks header part number and small block Ford application before beginning.
- Clean the cylinder head exhaust port surface and the header flange mating surfaces of any old gasket material.
- Position the adapter plate against the cylinder head using the appropriate exhaust gasket.
- Align the Kooks header flange to the adapter plate.
- Install the mounting hardware from the kit by hand, threading all bolts before applying torque.
- Torque the mounting fasteners to the specification listed in your Kooks header installation instructions.
- Inspect all joints for gaps and check for exhaust leaks after initial startup and again after the first heat cycle.
Prop 65 Warning
WARNING: This product can expose you to chemicals including Chromium and Nickel, which are known to the State of California to cause cancer, birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
Bolts
Bolts parts and accessories for engine, chassis, suspension, driveline, and exhaust projects are stocked at Black Ops Auto Works. Shop ARP bolts, stainless 12 point bolts, black oxide bolts, metric hardware, wheel bolts, flywheel bolts, main bolts, header bolts, axle bolts, ring gear bolts, fastener kits, and replacement hardware for LS, Coyote, HEMI, Ford, GM, Mopar, Porsche, and import engines. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 89 Bolts SKUs across thread, length, head style, material, finish, and application specific hardware. What This Bolts Collection Covers This collection covers automotive bolts and fastening hardware for repairs, engine assembly, chassis service, drivetrain work, exhaust installation, and wheel related service. It includes individual bolts and application specific sets across SAE and metric thread sizes. Thread, Length, and Head Style Choos...
View Bolts Products
Fabrication
Shop Fabrication Parts and Materials at Black Ops Auto Works for stainless steel tubing, titanium tubing, aluminum charge piping, mandrel bends, V-band clamps, flanges, merge collectors, AN fittings, PTFE hose kits, braided fuel and oil lines, heat shields, welding supplies, brackets, bungs, and hardware for building custom exhaust systems, turbo plumbing, intercooler piping, and fuel system routing. Start with tubing in stainless, titanium, or aluminum in the right diameter and wall thickness, then add mandrel bends, flanges, V-bands, and clamps to complete the joint work. Black Ops Auto Works carries 5,866 fabrication SKUs from Vibrant Performance, Ticon Industries, Stainless Bros, Radium Engineering, Fragola, DEI, and ATP Turbo. Why Custom Fabrication Custom fabrication solves fitment problems that no universal or pre-bent kit can address. Raw tubing, flanges, and fittings give the fabricator freedom to route exhaust around a turbo, snake charge pipe around accessories, hard-...
View Fabrication Products
Kooks Exhaust
Kooks Exhaust parts and accessories for American muscle cars and performance trucks are stocked at Black Ops Auto Works. Shop stainless steel long tube headers, shorty headers, catted connection pipes, mid pipes, X-pipes, H-pipes, cat-back systems, axle-back systems, resonator deletes, GREEN catalytic converters, O2 extensions, clamps and header hardware for Mustang, Camaro, Corvette, Challenger, Charger, Silverado, F-150 and Ram HEMI builds. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 174 Kooks exhaust SKUs across vehicle-specific fitment, performance upgrades, replacement parts, installation hardware and custom build needs. What This Collection Covers Kooks builds vehicle-specific stainless steel exhaust components for naturally aspirated, supercharged and turbocharged V8 street cars, track cars and HD truck builds. The range includes complete header-to-tailpipe paths as we...
View Kooks Exhaust Products