KYB Shocks & Struts Strut Mount Front 14-17 Mazda 3 / Mazda 6

Shop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works. Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs. Camber, Caster, and Toe Correction Camber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment. This collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster...

Shop KYB shocks, struts, mounts, protective components, steering stabilizers, and matched suspension packages by exact manufacturer part number and verified vehicle application. KYB Product Families The collection includes Excel-G, Gas-a-Just, MonoMax, AGX, Strut-Plus, Truck-Plus, K2.0, and application-specific KYB suspension service components. Choose Your Part Match the exact KYB manufacturer part number Confirm year, make, model, factory suspension, and ride height Verify front or rear position plus left or right side when specified Check whether springs, mounts, bearings, boots, bump stops, or hardware are included Review every current KYB application note before ordering Plan for professional installation and alignment when suspension geometry is affected Related Suspension Collections Shocks and Struts Coilovers Suspension Packages Suspension Parts Frequently Asked Questions Should KYB shocks or struts be replaced in pairs? Replacing both dampers on the same axle is gener...

Compare Mazda3 intake systems and body protection using generation, engine and sedan or hatchback body. Each accessory has its own year and mounting coverage. Engine and Intake Interfaces The displayed intake references distinguish earlier 2.0L/2.3L applications from later 2.5L versions. Match exact part number, sensor provisions, hoses and brackets. For an MZR-family damper, confirm installed engine, crank interface, pulleys and accessory drive. Engine displacement alone does not establish a complete installation. Hatchback and Sedan Protection Compare hood protectors by exact fascia or hood mounting and body style. The displayed sedan and hatchback references have different year ranges and attachment applications. For liners and window deflectors, match supplied rows, door configuration and in-channel or outside-mount design. Confirm retention and free pedal movement for front floor protection. Choose Your Part Identify generation, engine and body style. Match intake sensors and ...

Choose Mazda6 intake and body-protection options by generation, engine and transmission. Naturally aspirated, turbocharged and V6 applications require separate part-number coverage. Engine-Specific Intake Selection The displayed references distinguish 2.3L, 2.5L, 3.7L V6 and manual Mazdaspeed6 configurations. Match actual engine, sensor housing, hoses and brackets with the exact intake number. Review year coverage, emissions requirements and installation instructions. A later turbo 2.5L system should not be chosen from displacement alone. Cabin, Trunk and Hood Protection Match hood protectors to actual fascia/hood mounting and body generation. Compare cabin floor sets with separate trunk liners and their own production coverage. For an MZR damper or pedal device, verify actual engine-drive or electronic interfaces separately. Unrelated vehicle titles do not establish Mazda6 compatibility. Choose Your Part Record generation, engine and transmission. Match exact intake sensors and mo...

Compare Mazda CX3 hood protection, brake kits and suspension-service components using exact production and installed equipment. Each accessory has its own supported year and mounting application. Hood Protection and Rear Brakes The displayed Aeroskin reference identifies 2016–2021 CX3 coverage. Match hood/body mounting, supplied attachments and preparation instructions. For rear rotors, compare diameter, thickness, hat dimensions and caliper application. Review pad shape and hardware separately from rotor finish. Brake Packages and Suspension Mounts Compare pad-and-rotor kits by exact axle, compound, rotor configuration and complete contents. Shared Mazda3 or CX30 titles require explicit CX3 support. For mounts and boots, match service position and fitted suspension. A CX5 production-date qualifier does not establish CX3 coverage or a complete damper assembly. Choose Your Part Record production and actual equipment. Match hood-protector attachment and coverage. Compare rear brake g...

Compare Mazda CX5 floor protection, hood accessories and brake hydraulics by exact generation. Cabin rows and cargo pieces have separate coverage and should be matched individually. Cabin and Cargo-Liner Coverage The displayed Husky references distinguish earlier 2013 pieces from later 2017-onward cabin and cargo applications. Compare exact manufacturer coverage, retention and floor shape. A second-row liner does not include the front or cargo area unless stated. Match cargo-floor configuration and intended seat position before choosing the piece. Deflectors and Master-Cylinder Fit Compare outside-mount and in-channel deflectors against actual body and window arrangement. Hood protectors have their own year and mounting application. For a brake master cylinder, match production, bore, ports, mounting and installed brake-system requirements. A broad year range needs exact component confirmation. Choose Your Part Identify generation and seating layout. Compare front, second-row and c...

Choose Mazda CX-9 cabin protection and window accessories by generation, seating layout and mounting design. Front, second-row and cargo-area coverage should be selected as separate areas. Floor and Cargo Protection Start with the area being covered and compare the kit contents against the product photos and manufacturer part number. A front-and-second-row package should not be mistaken for a cargo-only liner. For cargo protection, identify seat position and floor configuration. For passenger footwells, compare retention points and the complete left/right coverage supplied. Window Deflectors and Service Parts The outside-mount Ventvisor option identifies a 2007–2015 CX-9 reference. Confirm the exact body application and four-piece contents; follow its surface-preparation and attachment instructions. For brake hydraulics or suspension service, use the installed component identification. Match master-cylinder bore and ports, or strut-mount position and mounting pattern, independently ...

Find Scion iA cabin-protection and service-part applications using the exact model year, body and engine. Match floor coverage, filter housings and original component references before ordering. Cabin Protection and Exterior Accessories The 3D MAXpider reference names first-row coverage across specified iA/Yaris applications. Confirm your exact year and floor layout, retention points and package contents. A Mazda 2 deflector title needs matching body/window geometry and explicit iA support. Review front/rear coverage and in-channel installation requirements. Engine and Suspension Cross-References Spark plugs require the complete thread, reach, seat and ignition specification. Oil filters need exact engine, thread/seal and manufacturer application support rather than a similar vehicle-family name. A Mazda 3/6 mount or Toyota 1ZZ-FE thrust-washer reference should not be treated as automatic iA fit. Confirm the actual assembly and exact OE/manufacturer cross-reference. Choose Your Part...

Shop shock mounts, strut mounts, camber plates, caster plates, pillowball upper mounts, motor mounts, and shock hardware from KYB, Tein, Cusco, Synergy Manufacturing, Ridetech, Progressive Suspension, Ground Control, Vorshlag, ISC Suspension, and other suspension mount manufacturers. Find OE-replacement strut mount kits, upgraded pillowball uppers for track and race use, adjustable camber and caster plates for lowered vehicles, heavy-duty off-road shock mounts, and application-specific mounting hardware for cars, trucks, SUVs, and off-road platforms. Shock and strut mounts wear out. Rubber isolators dry out, bearings fail, and the resulting clunks, vibrations, or alignment drift kill the ride quality even on a car with fresh dampers. This category covers everything from KYB direct-replacement strut mount kits for daily drivers to Cusco and Tein pillowball uppers for sport builds, plus dedicated camber and caster plates for lowered street, autocross, and track cars. Filter by moun...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

Find Toyota Yaris iA cabin and engine-service applications using exact production and installed equipment. Keep the iA body and engine specification distinct from other Yaris or GR Yaris applications. Cabin and Engine Components First-row mats require exact floor contours, retention and production coverage. Confirm package contents rather than assuming rear or cargo protection is included. Spark plugs and panel filters need exact engine specifications, airbox shape and manufacturer support. A Mazda 2 reference needs the precise cross-reference, not only shared naming. Suspension and Electronic Interfaces A Mazda 3/6 mount and a 1ZZ-FE thrust-washer reference should not be assumed suitable for iA. Confirm actual suspension or engine assembly and dimensions. Pedal controllers need vehicle/connector support. Wiper blades require the correct attachment and position as well as length. Choose Your Part Identify exact iA production and actual engine. Match first-row mat coverage and reten...